DW HDMI controller on some Allwinner SoCs has support for CEC, but due to additional logic put between CEC controller and pins, it doesn't work correctly, at least not with a lot of instrusive changes. Fortunately, it's still possible to bitbang protocol.
For such cases, add a platform option to suppress loading CEC driver. If DW HDMI CEC driver would be loaded, it wouldn't work anyway and only cause a confusion with multiple /dev entries.
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net --- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 2 +- include/drm/bridge/dw_hdmi.h | 2 ++ 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index a63e5f0dae56..fdda26f8b056 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -2634,7 +2634,7 @@ __dw_hdmi_probe(struct platform_device *pdev, hdmi->audio = platform_device_register_full(&pdevinfo); }
- if (config0 & HDMI_CONFIG0_CEC) { + if (!plat_data->is_cec_unusable && (config0 & HDMI_CONFIG0_CEC)) { cec.hdmi = hdmi; cec.ops = &dw_hdmi_cec_ops; cec.irq = irq; diff --git a/include/drm/bridge/dw_hdmi.h b/include/drm/bridge/dw_hdmi.h index 66e70770cce5..764b8bcfa62c 100644 --- a/include/drm/bridge/dw_hdmi.h +++ b/include/drm/bridge/dw_hdmi.h @@ -144,6 +144,8 @@ struct dw_hdmi_plat_data { int (*configure_phy)(struct dw_hdmi *hdmi, const struct dw_hdmi_plat_data *pdata, unsigned long mpixelclock); + + unsigned int is_cec_unusable : 1; };
struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,