Re: [PATCH v5 15/19] drm/msm/dpu: initialize dpu encoder and connector for writeback

On 4/26/2022 7:56 AM, Laurent Pinchart wrote:

On Tue, Apr 26, 2022 at 05:11:41AM +0300, Dmitry Baryshkov wrote:

...

On 26/04/2022 03:32, Laurent Pinchart wrote:

...

On Sun, Apr 24, 2022 at 05:32:06PM -0700, Abhinav Kumar wrote:

...

Initialize dpu encoder and connector for writeback if the target supports it in the catalog.

changes in v2:

• start initialing the encoder for writeback since we

have migrated to using drm_writeback_connector_init_with_encoder()

• instead of checking for WB_2 inside _dpu_kms_initialize_writeback

call it only when its WB_2

• rebase on tip of msm-next and remove usage of priv->encoders

changes in v3:

• none

changes in v4:

• fix copyright years order

Signed-off-by: Abhinav Kumar quic_abhinavk@quicinc.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org

---

drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 27 +++++++++---- drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 61 ++++++++++++++++++++++++++++- 2 files changed, 80 insertions(+), 8 deletions(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c index 24870eb..2d79002 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c @@ -2102,7 +2102,7 @@ static void dpu_encoder_early_unregister(struct drm_encoder *encoder) }

static int dpu_encoder_virt_add_phys_encs(

• u32 display_caps,
  

• struct msm_display_info *disp_info,
  struct dpu_encoder_virt *dpu_enc,
  struct dpu_enc_phys_init_params *params)
  

  {

@@ -2121,7 +2121,7 @@ static int dpu_encoder_virt_add_phys_encs( return -EINVAL; }

• if (display_caps & MSM_DISPLAY_CAP_VID_MODE) {

• if (disp_info->capabilities & MSM_DISPLAY_CAP_VID_MODE) { enc = dpu_encoder_phys_vid_init(params);

  if (IS_ERR_OR_NULL(enc)) {
  

@@ -2134,7 +2134,7 @@ static int dpu_encoder_virt_add_phys_encs( ++dpu_enc->num_phys_encs; }

• if (display_caps & MSM_DISPLAY_CAP_CMD_MODE) {

• if (disp_info->capabilities & MSM_DISPLAY_CAP_CMD_MODE) { enc = dpu_encoder_phys_cmd_init(params);

  if (IS_ERR_OR_NULL(enc)) {
  

@@ -2147,6 +2147,19 @@ static int dpu_encoder_virt_add_phys_encs( ++dpu_enc->num_phys_encs; }

• if (disp_info->intf_type == DRM_MODE_ENCODER_VIRTUAL) {

• enc = dpu_encoder_phys_wb_init(params);
  

• if (IS_ERR_OR_NULL(enc)) {
  

• 	DPU_ERROR_ENC(dpu_enc, "failed to init wb enc: %ld\n",
  

• 			PTR_ERR(enc));
  

• 	return enc == NULL ? -EINVAL : PTR_ERR(enc);
  

• }
  

• dpu_enc->phys_encs[dpu_enc->num_phys_encs] = enc;
  

• ++dpu_enc->num_phys_encs;
  

• }
• if (params->split_role == ENC_ROLE_SLAVE) dpu_enc->cur_slave = enc; else

@@ -2248,9 +2261,8 @@ static int dpu_encoder_setup_display(struct dpu_encoder_virt *dpu_enc, }

	if (!ret) {

• 	ret = dpu_encoder_virt_add_phys_encs(disp_info->capabilities,
  

• 										 dpu_enc,
  

• 										 &phys_params);
  

• 	ret = dpu_encoder_virt_add_phys_encs(disp_info,
  

• 			dpu_enc, &phys_params);
  	if (ret)
  		DPU_ERROR_ENC(dpu_enc, "failed to add phys encs\n");
  }
  

@@ -2367,8 +2379,9 @@ struct drm_encoder *dpu_encoder_init(struct drm_device *dev, if (!dpu_enc) return ERR_PTR(-ENOMEM);

• rc = drm_encoder_init(dev, &dpu_enc->base, &dpu_encoder_funcs,

• 	drm_enc_mode, NULL);
  

• 					  drm_enc_mode, NULL);
  

  if (rc) { devm_kfree(dev->dev, dpu_enc); return ERR_PTR(rc);

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c index c683cab..9a406e1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c @@ -1,7 +1,9 @@ // SPDX-License-Identifier: GPL-2.0-only /*

• • Copyright (c) 2014-2018, The Linux Foundation. All rights reserved.
    • Copyright (C) 2013 Red Hat

• • Copyright (c) 2014-2018, The Linux Foundation. All rights reserved.
• • Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
• • • Author: Rob Clark robdclark@gmail.com
    */

@@ -15,6 +17,7 @@ #include <drm/drm_crtc.h> #include <drm/drm_file.h> #include <drm/drm_vblank.h> +#include <drm/drm_writeback.h>

#include "msm_drv.h" #include "msm_mmu.h" @@ -29,6 +32,7 @@ #include "dpu_kms.h" #include "dpu_plane.h" #include "dpu_vbif.h" +#include "dpu_writeback.h"

#define CREATE_TRACE_POINTS #include "dpu_trace.h" @@ -648,6 +652,45 @@ static int _dpu_kms_initialize_displayport(struct drm_device *dev, return 0; }

+static int _dpu_kms_initialize_writeback(struct drm_device *dev,

• struct msm_drm_private *priv, struct dpu_kms *dpu_kms,
  

• const u32 *wb_formats, int n_formats)
  

+{

• struct drm_encoder *encoder = NULL;
• struct msm_display_info info;
• int rc;
• encoder = dpu_encoder_init(dev, DRM_MODE_ENCODER_VIRTUAL);

I'm puzzled. I thought the whole purpose of the drm_writeback_connector_init_with_encoder() function was to share an encoder between writeback and a real display output, but the encoder you create here seems to be specific to writeback. What am I missing ?

The encoder instance is specific to the writeback, however the encoder's code is shared between the virtual and 'real' encoders. All the code for encoder callbacks, resource management, irq handling is shared between them. It wouldn't be practical to duplicate or rewrite the whole dpu_encoder.c. During the design stage we have discussed several other possibile solutions. All of them look pretty ugly.

Does it mean that the output paths and the writeback paths have separate resources ?

They share pretty much all of the hardware resources such as clocks , interrupts and fetch bandwidth management.

...

...

...

• if (IS_ERR(encoder)) {

• DPU_ERROR("encoder init failed for dsi display\n");
  

• return PTR_ERR(encoder);
  

• }
• memset(&info, 0, sizeof(info));
• rc = dpu_writeback_init(dev, encoder, wb_formats,

• 	n_formats);
  

• if (rc) {

• DPU_ERROR("dpu_writeback_init, rc = %d\n", rc);
  

• drm_encoder_cleanup(encoder);
  

• return rc;
  

• }
• info.num_of_h_tiles = 1;
• /* use only WB idx 2 instance for DPU */
• info.h_tile_instance[0] = WB_2;
• info.intf_type = encoder->encoder_type;
• rc = dpu_encoder_setup(dev, encoder, &info);
• if (rc) {

• DPU_ERROR("failed to setup DPU encoder %d: rc:%d\n",
  

• 		  encoder->base.id, rc);
  

• return rc;
  

• }
• return 0;

+}

• /**
  • _dpu_kms_setup_displays - create encoders, bridges and connectors

  •                       for underlying displays
    

@@ -661,6 +704,7 @@ static int _dpu_kms_setup_displays(struct drm_device *dev, struct dpu_kms *dpu_kms) { int rc = 0;

• int i;

  rc = _dpu_kms_initialize_dsi(dev, priv, dpu_kms); if (rc) {

@@ -674,6 +718,21 @@ static int _dpu_kms_setup_displays(struct drm_device *dev, return rc; }

• /* Since WB isn't a driver check the catalog before initializing */
• if (dpu_kms->catalog->wb_count) {

• for (i = 0; i < dpu_kms->catalog->wb_count; i++) {
  

• 	if (dpu_kms->catalog->wb[i].id == WB_2) {
  

• 		rc = _dpu_kms_initialize_writeback(dev, priv, dpu_kms,
  

• 				dpu_kms->catalog->wb[i].format_list,
  

• 				dpu_kms->catalog->wb[i].num_formats);
  

• 		if (rc) {
  

• 			DPU_ERROR("initialize_WB failed, rc = %d\n", rc);
  

• 			return rc;
  

• 		}
  

• 	}
  

• }
  

• }
• return rc; }