Support for Orise Tech otm8009a 480p dsi 2dl video mode panel.
Signed-off-by: yannick fertre yannick.fertre@st.com --- drivers/video/Kconfig | 8 + drivers/video/Makefile | 1 + drivers/video/orisetech_otm8009a.c | 327 +++++++++++++++++++++++++++++++++++++ 3 files changed, 336 insertions(+) create mode 100644 drivers/video/orisetech_otm8009a.c
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 1981298..b5fc535 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -320,6 +320,14 @@ config VIDEO_LCD_ANX9804 from a parallel LCD interface and translate it on the fy into a DP interface for driving eDP TFT displays. It uses I2C for configuration.
+config VIDEO_LCD_ORISETECH_OTM8009A + bool "OTM8009A DSI LCD panel support" + depends on DM_VIDEO + select VIDEO_MIPI_DSI + default n + ---help--- + Support for Orise Tech otm8009a 480p dsi 2dl video mode panel. + config VIDEO_LCD_SSD2828 bool "SSD2828 bridge chip" default n diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 6f42cca..65002af 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_VIDEO_COREBOOT) += coreboot.o obj-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o obj-$(CONFIG_VIDEO_LCD_ANX9804) += anx9804.o obj-$(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM) += hitachi_tx18d42vm_lcd.o +obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o obj-$(CONFIG_VIDEO_MX3) += mx3fb.o videomodes.o diff --git a/drivers/video/orisetech_otm8009a.c b/drivers/video/orisetech_otm8009a.c new file mode 100644 index 0000000..aa8139a --- /dev/null +++ b/drivers/video/orisetech_otm8009a.c @@ -0,0 +1,327 @@ +/* + * Copyright (C) 2018 STMicroelectronics - All Rights Reserved + * Author(s): Yannick Fertre yannick.fertre@st.com for STMicroelectronics. + * Philippe Cornu philippe.cornu@st.com for STMicroelectronics. + * + * This otm8009a panel driver is based on the panel driver from + * drivers/gpu/drm/panel/panel-orisetech-otm8009a.c (kernel linux) + * + * SPDX-License-Identifier: GPL-2.0 + */ +#include <common.h> +#include <backlight.h> +#include <dm.h> +#include <mipi_display.h> +#include <panel.h> +#include <asm/gpio.h> +#include <power/regulator.h> + +#define DRV_NAME "orisetech_otm8009a" + +#define OTM8009A_BACKLIGHT_DEFAULT 240 +#define OTM8009A_BACKLIGHT_MAX 255 + +/* Manufacturer Command Set */ +#define MCS_ADRSFT 0x0000 /* Address Shift Function */ +#define MCS_PANSET 0xB3A6 /* Panel Type Setting */ +#define MCS_SD_CTRL 0xC0A2 /* Source Driver Timing Setting */ +#define MCS_P_DRV_M 0xC0B4 /* Panel Driving Mode */ +#define MCS_OSC_ADJ 0xC181 /* Oscillator Adjustment for Idle/Normal mode */ +#define MCS_RGB_VID_SET 0xC1A1 /* RGB Video Mode Setting */ +#define MCS_SD_PCH_CTRL 0xC480 /* Source Driver Precharge Control */ +#define MCS_NO_DOC1 0xC48A /* Command not documented */ +#define MCS_PWR_CTRL1 0xC580 /* Power Control Setting 1 */ +#define MCS_PWR_CTRL2 0xC590 /* Power Control Setting 2 for Normal Mode */ +#define MCS_PWR_CTRL4 0xC5B0 /* Power Control Setting 4 for DC Voltage */ +#define MCS_PANCTRLSET1 0xCB80 /* Panel Control Setting 1 */ +#define MCS_PANCTRLSET2 0xCB90 /* Panel Control Setting 2 */ +#define MCS_PANCTRLSET3 0xCBA0 /* Panel Control Setting 3 */ +#define MCS_PANCTRLSET4 0xCBB0 /* Panel Control Setting 4 */ +#define MCS_PANCTRLSET5 0xCBC0 /* Panel Control Setting 5 */ +#define MCS_PANCTRLSET6 0xCBD0 /* Panel Control Setting 6 */ +#define MCS_PANCTRLSET7 0xCBE0 /* Panel Control Setting 7 */ +#define MCS_PANCTRLSET8 0xCBF0 /* Panel Control Setting 8 */ +#define MCS_PANU2D1 0xCC80 /* Panel U2D Setting 1 */ +#define MCS_PANU2D2 0xCC90 /* Panel U2D Setting 2 */ +#define MCS_PANU2D3 0xCCA0 /* Panel U2D Setting 3 */ +#define MCS_PAND2U1 0xCCB0 /* Panel D2U Setting 1 */ +#define MCS_PAND2U2 0xCCC0 /* Panel D2U Setting 2 */ +#define MCS_PAND2U3 0xCCD0 /* Panel D2U Setting 3 */ +#define MCS_GOAVST 0xCE80 /* GOA VST Setting */ +#define MCS_GOACLKA1 0xCEA0 /* GOA CLKA1 Setting */ +#define MCS_GOACLKA3 0xCEB0 /* GOA CLKA3 Setting */ +#define MCS_GOAECLK 0xCFC0 /* GOA ECLK Setting */ +#define MCS_NO_DOC2 0xCFD0 /* Command not documented */ +#define MCS_GVDDSET 0xD800 /* GVDD/NGVDD */ +#define MCS_VCOMDC 0xD900 /* VCOM Voltage Setting */ +#define MCS_GMCT2_2P 0xE100 /* Gamma Correction 2.2+ Setting */ +#define MCS_GMCT2_2N 0xE200 /* Gamma Correction 2.2- Setting */ +#define MCS_NO_DOC3 0xF5B6 /* Command not documented */ +#define MCS_CMD2_ENA1 0xFF00 /* Enable Access Command2 "CMD2" */ +#define MCS_CMD2_ENA2 0xFF80 /* Enable Access Orise Command2 */ + +struct otm8009a_panel_priv { + struct udevice *reg; + struct gpio_desc reset; +}; + +static void otm8009a_dcs_write_buf(struct udevice *dev, const void *data, + size_t len) +{ + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); + struct mipi_dsi_device *device = plat->device; + + if (mipi_dsi_dcs_write_buffer(device, data, len) < 0) + dev_err(dev, "mipi dsi dcs write buffer failed\n"); +} + +#define dcs_write_seq(dev, seq...) \ +({ \ + static const u8 d[] = { seq }; \ + otm8009a_dcs_write_buf(dev, d, ARRAY_SIZE(d)); \ +}) + +#define dcs_write_cmd_at(dev, cmd, seq...) \ +({ \ + static const u16 c = cmd; \ + struct udevice *device = dev; \ + dcs_write_seq(device, MCS_ADRSFT, (c) & 0xFF); \ + dcs_write_seq(device, (c) >> 8, seq); \ +}) + +static int otm8009a_init_sequence(struct udevice *dev) +{ + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); + struct mipi_dsi_device *device = plat->device; + int ret; + + /* Enter CMD2 */ + dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0x80, 0x09, 0x01); + + /* Enter Orise Command2 */ + dcs_write_cmd_at(dev, MCS_CMD2_ENA2, 0x80, 0x09); + + dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL, 0x30); + mdelay(10); + + dcs_write_cmd_at(dev, MCS_NO_DOC1, 0x40); + mdelay(10); + + dcs_write_cmd_at(dev, MCS_PWR_CTRL4 + 1, 0xA9); + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 1, 0x34); + dcs_write_cmd_at(dev, MCS_P_DRV_M, 0x50); + dcs_write_cmd_at(dev, MCS_VCOMDC, 0x4E); + dcs_write_cmd_at(dev, MCS_OSC_ADJ, 0x66); /* 65Hz */ + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 2, 0x01); + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 5, 0x34); + dcs_write_cmd_at(dev, MCS_PWR_CTRL2 + 4, 0x33); + dcs_write_cmd_at(dev, MCS_GVDDSET, 0x79, 0x79); + dcs_write_cmd_at(dev, MCS_SD_CTRL + 1, 0x1B); + dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 2, 0x83); + dcs_write_cmd_at(dev, MCS_SD_PCH_CTRL + 1, 0x83); + dcs_write_cmd_at(dev, MCS_RGB_VID_SET, 0x0E); + dcs_write_cmd_at(dev, MCS_PANSET, 0x00, 0x01); + + dcs_write_cmd_at(dev, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00); + dcs_write_cmd_at(dev, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00, + 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00); + dcs_write_cmd_at(dev, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00, + 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00); + dcs_write_cmd_at(dev, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00, + 0x01, 0x02, 0x00, 0x00); + + dcs_write_cmd_at(dev, MCS_NO_DOC2, 0x00); + + dcs_write_cmd_at(dev, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); + dcs_write_cmd_at(dev, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0); + dcs_write_cmd_at(dev, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0); + dcs_write_cmd_at(dev, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); + dcs_write_cmd_at(dev, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0, + 0, 0, 0, 0, 0); + dcs_write_cmd_at(dev, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4, + 4, 0, 0, 0, 0); + dcs_write_cmd_at(dev, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0); + dcs_write_cmd_at(dev, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF); + + dcs_write_cmd_at(dev, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25, + 0x00, 0x00, 0x00, 0x00); + dcs_write_cmd_at(dev, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02); + dcs_write_cmd_at(dev, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); + dcs_write_cmd_at(dev, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26, + 0x00, 0x00, 0x00, 0x00); + dcs_write_cmd_at(dev, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01); + dcs_write_cmd_at(dev, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); + + dcs_write_cmd_at(dev, MCS_PWR_CTRL1 + 1, 0x66); + + dcs_write_cmd_at(dev, MCS_NO_DOC3, 0x06); + + dcs_write_cmd_at(dev, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10, + 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A, + 0x01); + dcs_write_cmd_at(dev, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10, + 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A, + 0x01); + + /* Exit CMD2 */ + dcs_write_cmd_at(dev, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF); + + ret = mipi_dsi_dcs_nop(device); + if (ret) + return ret; + + ret = mipi_dsi_dcs_exit_sleep_mode(device); + if (ret) + return ret; + + /* Wait for sleep out exit */ + mdelay(120); + + /* Default portrait 480x800 rgb24 */ + dcs_write_seq(dev, MIPI_DCS_SET_ADDRESS_MODE, 0x00); + + ret = mipi_dsi_dcs_set_column_address(device, 0, 479); + if (ret) + return ret; + + ret = mipi_dsi_dcs_set_page_address(device, 0, 799); + if (ret) + return ret; + + /* See otm8009a driver documentation for pixel format descriptions */ + ret = mipi_dsi_dcs_set_pixel_format(device, MIPI_DCS_PIXEL_FMT_24BIT | + MIPI_DCS_PIXEL_FMT_24BIT << 4); + if (ret) + return ret; + + /* Disable CABC feature */ + dcs_write_seq(dev, MIPI_DCS_WRITE_POWER_SAVE, 0x00); + + ret = mipi_dsi_dcs_set_display_on(device); + if (ret) + return ret; + + ret = mipi_dsi_dcs_nop(device); + if (ret) + return ret; + + /* Send Command GRAM memory write (no parameters) */ + dcs_write_seq(dev, MIPI_DCS_WRITE_MEMORY_START); + + return 0; +} + +static int otm8009a_panel_enable_backlight(struct udevice *dev) +{ + struct mipi_dsi_panel_plat *plat = dev_get_platdata(dev); + struct mipi_dsi_device *device = plat->device; + int ret; + + device->lanes = 2; + device->format = MIPI_DSI_FMT_RGB888; + device->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM; + + ret = mipi_dsi_attach(device); + if (ret < 0) + return ret; + + dev_err(dev, "initialize panel\n"); + ret = otm8009a_init_sequence(dev); + if (ret) + return ret; + + /* + * Power on the backlight with the requested brightness + * Note We can not use mipi_dsi_dcs_set_display_brightness() + * as otm8009a driver support only 8-bit brightness (1 param). + */ + dev_err(dev, "start, backlight\n"); + + dcs_write_seq(dev, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, + OTM8009A_BACKLIGHT_DEFAULT); + + /* Update Brightness Control & Backlight */ + dcs_write_seq(dev, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x24); + + /* need to wait a few time before set the DSI bridge in video mode */ + mdelay(10); + + return 0; +} + +static int otm8009a_panel_ofdata_to_platdata(struct udevice *dev) +{ + struct otm8009a_panel_priv *priv = dev_get_priv(dev); + int ret; + + if (IS_ENABLED(CONFIG_DM_REGULATOR)) { + ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, + "power-supply", &priv->reg); + if (ret) { + dev_err(dev, "Warning: cannot get power supply\n"); + if (ret != -ENOENT) + return ret; + } + } + + ret = gpio_request_by_name(dev, "reset-gpios", 0, &priv->reset, + GPIOD_IS_OUT); + if (ret) { + dev_err(dev, "warning: cannot get reset GPIO\n"); + if (ret != -ENOENT) + return ret; + } + + return 0; +} + +static int otm8009a_panel_probe(struct udevice *dev) +{ + struct otm8009a_panel_priv *priv = dev_get_priv(dev); + int ret; + + /* reset panel */ + dm_gpio_set_value(&priv->reset, true); + + mdelay(1); + + if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) { + dev_err(dev, "enable regulator '%s'\n", priv->reg->name); + ret = regulator_set_enable(priv->reg, true); + if (ret) + return ret; + } + + dm_gpio_set_value(&priv->reset, false); + + return 0; +} + +static const struct panel_ops otm8009a_panel_ops = { + .enable_backlight = otm8009a_panel_enable_backlight, +}; + +static const struct udevice_id otm8009a_panel_ids[] = { + { .compatible = "orisetech,otm8009a" }, + { } +}; + +U_BOOT_DRIVER(otm8009a_panel) = { + .name = "otm8009a_panel", + .id = UCLASS_PANEL, + .of_match = otm8009a_panel_ids, + .ops = &otm8009a_panel_ops, + .ofdata_to_platdata = otm8009a_panel_ofdata_to_platdata, + .probe = otm8009a_panel_probe, + .platdata_auto_alloc_size = sizeof(struct mipi_dsi_panel_plat), + .priv_auto_alloc_size = sizeof(struct otm8009a_panel_priv), +};