This reverts commit 18a1488bf1e13fc3fc96d7948466b2166067c6c8.
Those delays were added to support the Samsung ATNA33XC20 panel. However, we've moving that to its own panel driver and out of panel-simple. That means we don't need the ability to specify this delay.
NOTE: it's unlikely we want to keep this delay "just in case" some other panel needs it. The enable-gpio and the power supply are really supposed to be different ways to specify the same thing: the main enable of the panel. Supporting a delay between them doesn't really make sense.
Signed-off-by: Douglas Anderson dianders@chromium.org ---
drivers/gpu/drm/panel/panel-simple.c | 28 ---------------------------- 1 file changed, 28 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index c8694f7f8e0f..ff8b59471c71 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -132,22 +132,6 @@ struct panel_desc { */ unsigned int prepare_to_enable;
- /** - * @delay.power_to_enable: Time for the power to enable the display on. - * - * The time (in milliseconds) to wait after powering up the display - * before asserting its enable pin. - */ - unsigned int power_to_enable; - - /** - * @delay.disable_to_power_off: Time for the disable to power the display off. - * - * The time (in milliseconds) to wait before powering off the display - * after deasserting its enable pin. - */ - unsigned int disable_to_power_off; - /** * @delay.enable: Time for the panel to display a valid frame. * @@ -363,10 +347,6 @@ static int panel_simple_suspend(struct device *dev) struct panel_simple *p = dev_get_drvdata(dev);
gpiod_set_value_cansleep(p->enable_gpio, 0); - - if (p->desc->delay.disable_to_power_off) - msleep(p->desc->delay.disable_to_power_off); - regulator_disable(p->supply); p->unprepared_time = ktime_get();
@@ -427,9 +407,6 @@ static int panel_simple_prepare_once(struct panel_simple *p) return err; }
- if (p->desc->delay.power_to_enable) - msleep(p->desc->delay.power_to_enable); - gpiod_set_value_cansleep(p->enable_gpio, 1);
delay = p->desc->delay.prepare; @@ -803,11 +780,6 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc, break; }
- if (!panel->enable_gpio && desc->delay.disable_to_power_off) - dev_warn(dev, "Need a delay after disabling panel GPIO, but a GPIO wasn't provided\n"); - if (!panel->enable_gpio && desc->delay.power_to_enable) - dev_warn(dev, "Need a delay before enabling panel GPIO, but a GPIO wasn't provided\n"); - dev_set_drvdata(dev, panel);
/*