Reviewed-by: Shashank Sharma shashank.sharma@intel.com
Regards Shashank On 3/23/2018 11:55 PM, Ville Syrjala wrote:
From: Ville Syrjälä ville.syrjala@linux.intel.com
Since we may attempt to reconfigure SCDC when the sink has already been disconnected we probably shouldn't scare the user with errors in dmesg that are 100% expected in that case. Just leave it up to the caller whether to print an error message or not, and just output debug messages from the helper itself.
Cc: Shashank Sharma shashank.sharma@intel.com Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com
drivers/gpu/drm/drm_scdc_helper.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c index 657ea5ab6c3f..870e25f1f788 100644 --- a/drivers/gpu/drm/drm_scdc_helper.c +++ b/drivers/gpu/drm/drm_scdc_helper.c @@ -141,7 +141,7 @@ bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter)
ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status); if (ret < 0) {
DRM_ERROR("Failed to read scrambling status: %d\n", ret);
DRM_DEBUG_KMS("Failed to read scrambling status: %d\n", ret);@@ -168,7 +168,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); if (ret < 0) {
DRM_ERROR("Failed to read TMDS config: %d\n", ret);
DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret);@@ -179,7 +179,7 @@ bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable)
ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); if (ret < 0) {
DRM_ERROR("Failed to enable scrambling: %d\n", ret);
DRM_DEBUG_KMS("Failed to enable scrambling: %d\n", ret);@@ -223,7 +223,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); if (ret < 0) {
DRM_ERROR("Failed to read TMDS config: %d\n", ret);
DRM_DEBUG_KMS("Failed to read TMDS config: %d\n", ret);@@ -234,7 +234,7 @@ bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set)
ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); if (ret < 0) {
DRM_ERROR("Failed to set TMDS clock ratio: %d\n", ret);
DRM_DEBUG_KMS("Failed to set TMDS clock ratio: %d\n", ret);