Now that we have a graph schema, rework the display related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas.
In panel-common.yaml, 'ports' is dropped. Any binding using 'ports' should be one with more than 1 port node, and the binding must define what each port is.
Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will need further updates to use video-interfaces.yaml once that lands.
Cc: Thierry Reding thierry.reding@gmail.com Cc: Sam Ravnborg sam@ravnborg.org Cc: Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com Cc: Maxime Ripard mripard@kernel.org Cc: Maarten Lankhorst maarten.lankhorst@linux.intel.com Cc: Thomas Zimmermann tzimmermann@suse.de Signed-off-by: Rob Herring robh@kernel.org --- v3: - Rework based on graph.yaml changes. 'port' nodes now have a $ref and endpoint nodes do too if they define additional properties. - Convert ste,mcde.yaml
v2: - Drop 'type: object' where we have a $ref - Drop any common properties like 'reg', '#address-cells', "#size-cells', 'remote-endpoint' - Keep description in ti,k2g-dss.yaml --- .../allwinner,sun4i-a10-display-backend.yaml | 23 +--- .../allwinner,sun4i-a10-display-frontend.yaml | 19 +-- .../display/allwinner,sun4i-a10-hdmi.yaml | 19 +-- .../display/allwinner,sun4i-a10-tcon.yaml | 25 +--- .../allwinner,sun4i-a10-tv-encoder.yaml | 6 +- .../display/allwinner,sun6i-a31-drc.yaml | 19 +-- .../display/allwinner,sun6i-a31-mipi-dsi.yaml | 6 +- .../allwinner,sun8i-a83t-de2-mixer.yaml | 19 +-- .../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 19 +-- .../display/allwinner,sun8i-r40-tcon-top.yaml | 110 ++---------------- .../display/allwinner,sun9i-a80-deu.yaml | 19 +-- .../display/amlogic,meson-dw-hdmi.yaml | 4 +- .../bindings/display/amlogic,meson-vpu.yaml | 4 +- .../bindings/display/brcm,bcm2835-dpi.yaml | 7 +- .../display/bridge/analogix,anx7625.yaml | 6 +- .../display/bridge/analogix,anx7814.yaml | 19 +-- .../bindings/display/bridge/anx6345.yaml | 18 +-- .../display/bridge/cdns,mhdp8546.yaml | 22 +--- .../display/bridge/chrontel,ch7033.yaml | 6 +- .../display/bridge/intel,keembay-dsi.yaml | 14 +-- .../bindings/display/bridge/ite,it6505.yaml | 2 +- .../display/bridge/lontium,lt9611.yaml | 70 ++--------- .../bindings/display/bridge/lvds-codec.yaml | 18 +-- .../bindings/display/bridge/nwl-dsi.yaml | 41 ++----- .../bindings/display/bridge/ps8640.yaml | 24 +--- .../bindings/display/bridge/renesas,lvds.yaml | 18 +-- .../display/bridge/simple-bridge.yaml | 18 +-- .../display/bridge/snps,dw-mipi-dsi.yaml | 7 +- .../display/bridge/thine,thc63lvd1024.yaml | 21 +--- .../bindings/display/bridge/ti,sn65dsi86.yaml | 45 +------ .../bindings/display/bridge/ti,tfp410.yaml | 24 +--- .../display/bridge/toshiba,tc358762.yaml | 52 +-------- .../display/bridge/toshiba,tc358768.yaml | 48 +------- .../display/bridge/toshiba,tc358775.yaml | 19 +-- .../connector/analog-tv-connector.yaml | 1 + .../display/connector/dvi-connector.yaml | 1 + .../display/connector/hdmi-connector.yaml | 1 + .../display/connector/vga-connector.yaml | 1 + .../bindings/display/imx/nxp,imx8mq-dcss.yaml | 2 +- .../bindings/display/ingenic,lcd.yaml | 10 +- .../display/intel,keembay-display.yaml | 2 +- .../display/panel/advantech,idk-2121wr.yaml | 21 ++-- .../bindings/display/panel/panel-common.yaml | 11 +- .../rockchip/rockchip,rk3066-hdmi.yaml | 16 +-- .../display/rockchip/rockchip-vop.yaml | 5 +- .../bindings/display/st,stm32-dsi.yaml | 12 +- .../bindings/display/st,stm32-ltdc.yaml | 8 +- .../devicetree/bindings/display/ste,mcde.yaml | 5 +- .../bindings/display/ti/ti,am65x-dss.yaml | 19 +-- .../bindings/display/ti/ti,j721e-dss.yaml | 23 +--- .../bindings/display/ti/ti,k2g-dss.yaml | 3 +- 51 files changed, 185 insertions(+), 747 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml index 86057d541065..12a7df0e38b2 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml @@ -84,36 +84,23 @@ properties: const: dma-mem
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Input endpoints of the controller.
port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Output endpoints of the controller.
required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml index 3eb1c2bbf4e7..055157fbf3bf 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml @@ -57,35 +57,22 @@ properties: maxItems: 1
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller.
required: - - "#address-cells" - - "#size-cells" - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml index 75e6479397a5..7f11452539f4 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml @@ -76,37 +76,24 @@ properties: - const: audio-tx
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. Usually an HDMI connector.
required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 4c15a2644a7c..c13faf3e6581 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -115,31 +115,24 @@ properties: - const: lvds
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller.
port@1: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | Output endpoints of the controller.
patternProperties: "^endpoint(@[0-9])$": - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false
properties: allwinner,tcon-channel: @@ -156,16 +149,10 @@ properties: property is not present, the endpoint number will be used as the channel number.
- unevaluatedProperties: true - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml index 6009324be967..afc0ed799e0e 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml @@ -24,11 +24,9 @@ properties: maxItems: 1
port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - first port should be the input endpoint, usually coming from the + The first port should be the input endpoint, usually coming from the associated TCON.
required: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml index 0c1ce55940e1..71cce5687580 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml @@ -46,36 +46,23 @@ properties: maxItems: 1
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller.
required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml index 7aa330dabc44..a738d7c12a97 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml @@ -47,11 +47,9 @@ properties: const: dphy
port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. That - port should be the input endpoint, usually coming from the + The port should be the input endpoint, usually coming from the associated TCON.
required: diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml index c040eef56518..4f91eec26de9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml @@ -43,35 +43,22 @@ properties: maxItems: 1
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller.
required: - - "#address-cells" - - "#size-cells" - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml index fa4769a0b26e..b3e9992525c2 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml @@ -93,38 +93,25 @@ properties: The VCC power supply of the controller
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller. Usually the associated TCON.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller. Usually an HDMI connector.
required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml index b98ca609824b..ec21e8bf2767 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml @@ -80,141 +80,45 @@ properties: maxItems: 1
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. - All ports should have only one endpoint connected to - remote endpoint. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for Mixer 0 mux.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for Mixer 0 mux
- properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for Mixer 1 mux.
port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for Mixer 1 mux
- properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@4: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoint for HDMI mux.
- properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - - reg: true - - patternProperties: - "^endpoint@[0-9]$": - type: object - - properties: - reg: - description: | - ID of the target TCON - - required: - - reg - - required: - - "#address-cells" - - "#size-cells" - - additionalProperties: false - port@5: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoint for HDMI mux
required: - - "#address-cells" - - "#size-cells" - port@0 - port@1 - port@4 - port@5
- additionalProperties: false - required: - "#clock-cells" - compatible diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml index 96de41d32b3e..637372ec4614 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml @@ -40,36 +40,23 @@ properties: maxItems: 1
ports: - type: object - description: | - A ports node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Input endpoints of the controller.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Output endpoints of the controller.
required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml index 0da42ab8fd3a..cf5a208f2f10 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml @@ -81,12 +81,12 @@ properties: description: phandle to an external 5V regulator to power the HDMI logic
port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the VENC Input port node.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the TMDS Output port node.
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml index a8d202c9d004..851cb0781217 100644 --- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml +++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml @@ -83,12 +83,12 @@ properties: description: phandle to the associated power domain
port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the CVBS VDAC port node.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the HDMI-TX port node.
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml index 5c1024bbc1b3..c9ad0ecc9b6d 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml @@ -27,10 +27,9 @@ properties: - const: pixel
port: - type: object - description: > - Port node with a single endpoint connecting to the panel, as - defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/port + description: + Port node with a single endpoint connecting to the panel.
required: - compatible diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 60585a4fc22b..d08b71dc5f75 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -35,16 +35,16 @@ properties: maxItems: 1
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for MIPI DSI input.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for panel or connector.
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml index 3ba477aefdd7..8e13f27b28ed 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml @@ -42,31 +42,18 @@ properties: description: Regulator for 1.0V digital core power.
ports: - type: object - description: - A node containing input and output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports
properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for HDMI input.
- properties: - reg: - const: 0 - port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Video port for SlimPort, DisplayPort, eDP or MyDP output.
- properties: - reg: - const: 1 - required: - port@0 - port@1 diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml index 8c0e4f285fbc..ccf41688f0bb 100644 --- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml +++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml @@ -34,31 +34,23 @@ properties: description: Regulator for 2.5V digital core power.
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for LVTTL input
port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector). May be omitted if EDID works reliably.
required: - port@0
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml index 74d675fc6e7b..63427878715e 100644 --- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml +++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml @@ -57,47 +57,37 @@ properties: maxItems: 1
ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt. + $ref: /schemas/graph.yaml#/properties/ports
properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: First input port representing the DP bridge input.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Second input port representing the DP bridge input.
port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Third input port representing the DP bridge input.
port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Fourth input port representing the DP bridge input.
port@4: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Output port representing the DP bridge output.
required: - port@0 - port@4 - - '#address-cells' - - '#size-cells'
allOf: - if: diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml index 9f38f55fc990..bb6289c7d375 100644 --- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml +++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml @@ -19,16 +19,16 @@ properties: description: I2C address of the device
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Video port for RGB input.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | DVI port, should be connected to a node compatible with the dvi-connector binding. diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml index ab5be2625224..dcb1336ee2a5 100644 --- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml @@ -35,29 +35,21 @@ properties: - const: clk_mipi_cfg
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: MIPI DSI input port.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output port.
required: - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml index efbb3d0117dc..eedf8b7f5173 100644 --- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml @@ -55,7 +55,7 @@ properties: description: extcon specifier for the Power Delivery
port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to DPI host port node
required: diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml index 7a1c89b995e2..5b9d36f7af30 100644 --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml @@ -38,82 +38,26 @@ properties: description: Regulator for 3.3V IO power.
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Primary MIPI port-1 for MIPI input
- properties: - reg: - const: 0 - - patternProperties: - "^endpoint(@[0-9])$": - type: object - additionalProperties: false - - properties: - remote-endpoint: - $ref: /schemas/types.yaml#/definitions/phandle - - required: - - reg - port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Additional MIPI port-2 for MIPI input, used in combination with primary MIPI port-1 to drive higher resolution displays
- properties: - reg: - const: 1 - - patternProperties: - "^endpoint(@[0-9])$": - type: object - additionalProperties: false - - properties: - remote-endpoint: - $ref: /schemas/types.yaml#/definitions/phandle - - required: - - reg - port@2: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: HDMI port for HDMI output
- properties: - reg: - const: 2 - - patternProperties: - "^endpoint(@[0-9])$": - type: object - additionalProperties: false - - properties: - remote-endpoint: - $ref: /schemas/types.yaml#/definitions/phandle - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@2
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml index e5e3c72630cf..717d09fffd11 100644 --- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml +++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml @@ -45,25 +45,17 @@ properties: - thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
ports: - type: object - description: | - This device has two video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 + $ref: /schemas/graph.yaml#/properties/ports
+ properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | For LVDS encoders, port 0 is the parallel input For LVDS decoders, port 0 is the LVDS input
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | For LVDS encoders, port 1 is the LVDS output For LVDS decoders, port 1 is the parallel output @@ -72,8 +64,6 @@ properties: - port@0 - port@1
- additionalProperties: false - powerdown-gpios: description: The GPIO used to control the power down line of this device. diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml index a125b2dd3a2f..350fb8f400f0 100644 --- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml @@ -84,40 +84,23 @@ properties: - const: pclk
ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/graph.txt. + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base description: Input port node to receive pixel data from the display controller. Exactly one endpoint must be specified. properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - endpoint@0: + $ref: /schemas/graph.yaml#/properties/endpoint description: sub-node describing the input from LCDIF - type: object
endpoint@1: + $ref: /schemas/graph.yaml#/properties/endpoint description: sub-node describing the input from DCSS - type: object - - reg: - const: 0 - - required: - - '#address-cells' - - '#size-cells' - - reg
oneOf: - required: @@ -125,28 +108,18 @@ properties: - required: - endpoint@1
- additionalProperties: false + unevaluatedProperties: false
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output port node to the panel or the next bridge in the chain
- '#address-cells': - const: 1 - - '#size-cells': - const: 0 - required: - - '#address-cells' - - '#size-cells' - port@0 - port@1
- additionalProperties: false - required: - '#address-cells' - '#size-cells' diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml index 7e27cfcf770d..db85e12e7b98 100644 --- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml @@ -43,34 +43,22 @@ properties: description: Regulator for 3.3V digital core power.
ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 + $ref: /schemas/graph.yaml#/properties/ports
+ properties: port@0: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for DSI input
port@1: - type: object - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for eDP output (panel or connector).
required: - port@0
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml index e5b163951b91..d74022cc6e29 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml +++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml @@ -49,33 +49,21 @@ properties: maxItems: 1
ports: - type: object - description: | - This device has two video ports. Their connections are modelled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - Each port shall have a single endpoint. + $ref: /schemas/graph.yaml#/properties/ports
properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Parallel RGB input port
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: LVDS output port
required: - port@0 - port@1
- additionalProperties: false - power-domains: maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml index 3ddb35fcf0a2..45f8701d0514 100644 --- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml +++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml @@ -30,31 +30,21 @@ properties: - ti,ths8135
ports: - type: object - description: | - This device has two video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 + $ref: /schemas/graph.yaml#/properties/ports
+ properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The bridge input
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The bridge output
required: - port@0 - port@1
- additionalProperties: false - enable-gpios: maxItems: 1 description: GPIO controlling bridge enable diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml index e42cb610f545..3c3e51af154b 100644 --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -47,14 +47,15 @@ properties: const: apb
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Input node to receive pixel data. + port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output node to panel.
required: diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml index 469ac4a34273..4f19a72122bd 100644 --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml @@ -25,11 +25,8 @@ properties: const: thine,thc63lvd1024
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports description: | - This device has four video ports. Their connections are modeled using the - OF graph bindings specified in Documentation/devicetree/bindings/graph.txt. - The device can operate in single-link mode or dual-link mode. In single-link mode, all pixels are received on port@0, and port@1 shall not contain any endpoint. In dual-link mode, even-numbered pixels are @@ -37,34 +34,26 @@ properties: port@1 shall contain endpoints.
properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: First LVDS input port
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Second LVDS input port
port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: First digital CMOS/TTL parallel output
port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Second digital CMOS/TTL parallel output
required: - port@0 - port@2
- additionalProperties: false - oe-gpios: maxItems: 1 description: Output enable GPIO signal, pin name "OE", active high. diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml index f8622bd0f61e..26932d2e86ab 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml @@ -71,54 +71,26 @@ properties: description: See ../../pwm/pwm.yaml for description of the cell formats.
ports: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/properties/port description: Video port for MIPI DSI input
- properties: - reg: - const: 0 - - endpoint: - type: object - additionalProperties: false - properties: - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: Video port for eDP output (panel or connector).
properties: - reg: - const: 1 - endpoint: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false
properties: - remote-endpoint: true - data-lanes: oneOf: - minItems: 1 @@ -171,12 +143,7 @@ properties: dependencies: lane-polarities: [data-lanes]
- required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml index 605831c1e836..4c5dd8ec2951 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml @@ -31,23 +31,18 @@ properties: maximum: 7
ports: - description: - A node containing input and output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: DPI input port. - type: object
properties: - reg: - const: 0 - endpoint: - type: object + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false
properties: pclk-sample: @@ -67,15 +62,8 @@ properties: default: 24
port@1: + $ref: /schemas/graph.yaml#/properties/port description: DVI output port. - type: object - - properties: - reg: - const: 1 - - endpoint: - type: object
required: - port@0 diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml index 195025e6803c..5216c27fc0ad 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml @@ -25,62 +25,20 @@ properties: description: Regulator for 1.2V internal core power.
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DSI input
- properties: - reg: - const: 0 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - - description: | + $ref: /schemas/graph.yaml#/properties/port + description: Video port for MIPI DPI output (panel or connector).
- properties: - reg: - const: 1 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml index c036a75db8f7..eacfe7165083 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml @@ -42,65 +42,30 @@ properties: const: refclk
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: | Video port for RGB input
properties: - reg: - const: 0 - - patternProperties: endpoint: - type: object - additionalProperties: false + $ref: /schemas/graph.yaml#/$defs/endpoint-base + unevaluatedProperties: false
properties: data-lines: enum: [ 16, 18, 24 ]
- remote-endpoint: true - - required: - - reg - port@1: - type: object - additionalProperties: false - + $ref: /schemas/graph.yaml#/properties/port description: | Video port for DSI output (panel or connector).
- properties: - reg: - const: 1 - - patternProperties: - endpoint: - type: object - additionalProperties: false - - properties: - remote-endpoint: true - - required: - - reg - required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
@@ -156,4 +121,3 @@ examples: }; }; }; - diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml index fd3113aa9ccd..f018cabf0e44 100644 --- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml @@ -44,31 +44,22 @@ properties: description: Hardware reset, Low active
ports: - type: object - description: - A node containing input and output port nodes with endpoint definitions - as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 + $ref: /schemas/graph.yaml#/properties/ports
+ properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | DSI Input. The remote endpoint phandle should be a reference to a valid mipi_dsi_host device node.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Video port for LVDS output (panel or connector).
port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: | Video port for Dual link LVDS output (panel or connector).
diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml index eebe88fed999..a31ca2d52b86 100644 --- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml @@ -25,6 +25,7 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32
port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing analog TV signals
required: diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml index 71cb9220fa59..93eb14294e68 100644 --- a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml @@ -36,6 +36,7 @@ properties: description: the connector has pins for DVI dual-link
port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing DVI signals
required: diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml index 14d7128af592..83c0d008265b 100644 --- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml @@ -37,6 +37,7 @@ properties: maxItems: 1
port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing HDMI signals
required: diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml index 5782c4bb3252..25f868002000 100644 --- a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml +++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml @@ -20,6 +20,7 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle
port: + $ref: /schemas/graph.yaml#/properties/port description: Connection to controller providing VGA signals
required: diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml index f1f25aa794d9..0091df9dd73b 100644 --- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml +++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml @@ -74,7 +74,7 @@ properties: - description: Must be 400 MHz
port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml index 768050f30dba..50d2b0a50e8a 100644 --- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml +++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml @@ -39,18 +39,18 @@ properties: minItems: 1
port: - description: OF graph bindings (specified in bindings/graph.txt). + $ref: /schemas/graph.yaml#/properties/port
ports: - description: OF graph bindings (specified in bindings/graph.txt). - type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DPI output, to interface with TFT panels.
port@8: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Link to the Image Processing Unit (IPU). (See ingenic,ipu.yaml).
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml index 0a697d45c2ad..bc6622b010ca 100644 --- a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml +++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml @@ -36,7 +36,7 @@ properties: maxItems: 1
port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Display output node to DSI.
required: diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml index 6b7fddc80c41..67682fe77f10 100644 --- a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml +++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml @@ -37,34 +37,33 @@ properties: panel-timing: true
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: The sink for odd pixels. properties: - reg: - const: 0 - dual-lvds-odd-pixels: true
required: - - reg - dual-lvds-odd-pixels
port@1: - type: object + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false description: The sink for even pixels. properties: - reg: - const: 1 - dual-lvds-even-pixels: true
required: - - reg - dual-lvds-even-pixels
+ required: + - port@0 + - port@1 + additionalProperties: false
required: diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index cd6dc5461721..5b38dc89cb21 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -68,16 +68,7 @@ properties:
# Connectivity port: - type: object - - ports: - type: object - description: - Panels receive video data through one or multiple connections. While - the nature of those connections is specific to the panel type, the - connectivity is expressed in a standard fashion using ports as specified - in the device graph bindings defined in - Documentation/devicetree/bindings/graph.txt. + $ref: /schemas/graph.yaml#/properties/port
ddc-i2c-bus: $ref: /schemas/types.yaml#/definitions/phandle diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml index 4110d003ce1f..008c144257cb 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml @@ -43,34 +43,24 @@ properties: This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports
properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Port node with two endpoints, numbered 0 and 1, connected respectively to vop0 and vop1.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: Port node with one endpoint connected to a hdmi-connector node.
required: - - "#address-cells" - - "#size-cells" - port@0 - port@1
- additionalProperties: false - required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml index ed8148e26e24..6f43d885c9b3 100644 --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml @@ -70,10 +70,7 @@ properties: - const: dclk
port: - type: object - description: - A port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. + $ref: /schemas/graph.yaml#/properties/port
assigned-clocks: maxItems: 2 diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml index 327a14d85df8..679daed4124e 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml @@ -51,20 +51,16 @@ properties: Phandle of the regulator that provides the supply voltage.
ports: - type: object - description: - A node containing DSI input & output port nodes with endpoint - definitions as documented in - Documentation/devicetree/bindings/media/video-interfaces.txt - Documentation/devicetree/bindings/graph.txt + $ref: /schemas/graph.yaml#/properties/ports + properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI input port node, connected to the ltdc rgb output port.
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: DSI output port node, connected to a panel or a bridge input port"
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml index bf8ad916e9b0..d54f9ca207af 100644 --- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml +++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml @@ -35,15 +35,13 @@ properties: maxItems: 1
port: - type: object - description: - "Video port for DPI RGB output. + $ref: /schemas/graph.yaml#/properties/port + description: | + Video port for DPI RGB output. ltdc has one video port with up to 2 endpoints: - for external dpi rgb panel or bridge, using gpios. - for internal dpi input of the MIPI DSI host controller. Note: These 2 endpoints cannot be activated simultaneously. - Please refer to the bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt."
required: - compatible diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml index 830c9b4091cc..de0c678b3c29 100644 --- a/Documentation/devicetree/bindings/display/ste,mcde.yaml +++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml @@ -42,10 +42,9 @@ properties: description: a phandle to the analog voltage regulator
port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - A DPI port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt + A DPI port node
"#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml index 4dc30738ee57..781c1868b0b8 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml @@ -74,30 +74,19 @@ properties: type: boolean
ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 + $ref: /schemas/graph.yaml#/properties/ports
+ properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The DSS OLDI output port node form video port 1
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The DSS DPI output port node from video port 2
- required: - - "#address-cells" - - "#size-cells" - ti,am65x-oldi-io-ctrl: $ref: "/schemas/types.yaml#/definitions/phandle-array" maxItems: 1 diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml index c9a947d55fa4..2986f9acc9f0 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml @@ -107,40 +107,29 @@ properties: type: boolean
ports: - type: object - description: - Ports as described in Documentation/devicetree/bindings/graph.txt - properties: - "#address-cells": - const: 1 - - "#size-cells": - const: 0 + $ref: /schemas/graph.yaml#/properties/ports
+ properties: port@0: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node form video port 1
port@1: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 2
port@2: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 3
port@3: - type: object + $ref: /schemas/graph.yaml#/properties/port description: The output port node from video port 4
- required: - - "#address-cells" - - "#size-cells" - max-memory-bandwidth: $ref: /schemas/types.yaml#/definitions/uint32 description: diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml index 8f87b82c6695..7ce7bbad5780 100644 --- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml +++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml @@ -54,9 +54,8 @@ properties: description: phandle to the associated power domain
port: - type: object + $ref: /schemas/graph.yaml#/properties/port description: - Port as described in Documentation/devicetree/bindings/graph.txt. The DSS DPI output port node
max-memory-bandwidth: