Hey,
Op 27-07-18 om 12:12 schreef Satendra Singh Thakur:
Following changes are done to this func:
- Currently there are many redundant error checks for
count_connectors, mode, fb and mode_valid. if (crtc_req->mode_valid) if (crtc_req->count_connectors == 0 && mode) if (crtc_req->count_connectors > 0 && (!mode || !fb)) if (crtc_req->count_connectors > 0) if (crtc_req->count_connectors > config->num_connector)
These 5 checks are replaced by just 2 checks. if (!crtc_req->mode_valid) if (!crtc_req->count_connectors || crtc_req->count_connectors > config->num_connector)
- Also, currently, if user pass invalid args
count_connectors=0, mode=NULL, fb=NULL, code wont throw any errors and eventually __drm_mode_set_config_internal will be called. With the modified code, this will be taken care.
- Also, these error checks alongwith following
if (!file_priv->aspect_ratio_allowed && (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK)
has been moved before taking mutex and modeset lock because they don't need any lock. Moreover, after grabbing locks, if its found that user supplied invalid args, it will be too late as getting lock may require considerable time.
- Also, if modeset_lock is tried many times in case of EDEADLK
error, then this will be the code flow
retry: ret = drm_modeset_lock_all_ctx(crtc->dev, &ctx);
if (ret)-->this is true goto out;
out: if (fb) if (connector_set) drm_mode_destroy(dev, mode); if (ret == -EDEADLK) goto retry; It can be observed that checks on fb, connector_set and call to mode_destroy are redundant in retry-case. If we keep if (ret == -EDEADLK) just after out:, that will avoid redundant checks.
In the normal case (non-retry), all checks will be required. Thus shifting of if (ret == -EDEADLK) right after out label won't affect normal case.
- Also, kfree is moved inside if (connector_set).
- Also, if major error checks are in the beginning of the func
and if user supplied invalid params, we will exit the func sooner without wasting much effort in finding crtc and framebuffer etc.
Signed-off-by: Satendra Singh Thakur satendra.t@samsung.com
drivers/gpu/drm/drm_crtc.c | 207 +++++++++++++++++++++------------------------ 1 file changed, 98 insertions(+), 109 deletions(-)
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 98a36e6..15927e7 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -578,7 +578,25 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, */ if (crtc_req->x & 0xffff0000 || crtc_req->y & 0xffff0000) return -ERANGE;
- if (!file_priv->aspect_ratio_allowed &&
(crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) !=DRM_MODE_FLAG_PIC_AR_NONE) {DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");return -EINVAL;- }
- /* Check if the flag is set*/
- if (!crtc_req->mode_valid) {
DRM_DEBUG_KMS("mode_valid flag [%d] is not set\n",crtc_req->mode_valid);return -EINVAL;- }
It is allowed to pass crtc_id, mode_valid = false and count_connectors == 0, you're missing this check now. It's used to disable a crtc:
https://cgit.freedesktop.org/drm/igt-gpu-tools/tree/lib/igt_kms.c#n1452
- /* Check the validity of count_connectors supplied by user */
- if (!crtc_req->count_connectors ||
crtc_req->count_connectors > config->num_connector) {DRM_DEBUG_KMS("Invalid connectors' count %d\n",crtc_req->count_connectors);return -EINVAL;- } crtc = drm_crtc_find(dev, file_priv, crtc_req->crtc_id); if (!crtc) { DRM_DEBUG_KMS("Unknown CRTC ID %d\n", crtc_req->crtc_id);
@@ -595,134 +613,105 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, if (ret) goto out;
- if (crtc_req->mode_valid) {
/* If we have a mode we need a framebuffer. *//* If we pass -1, set the mode with the currently bound fb */if (crtc_req->fb_id == -1) {struct drm_framebuffer *old_fb;
- /* If we have a mode we need a framebuffer. */
- /* If we pass -1, set the mode with the currently bound fb */
- if (crtc_req->fb_id == -1) {
struct drm_framebuffer *old_fb;
if (plane->state)old_fb = plane->state->fb;elseold_fb = plane->fb;
if (plane->state)old_fb = plane->state->fb;elseold_fb = plane->fb;
if (!old_fb) {DRM_DEBUG_KMS("CRTC doesn't have current FB\n");ret = -EINVAL;goto out;}fb = old_fb;/* Make refcounting symmetric with the lookup path. */drm_framebuffer_get(fb);} else {fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);if (!fb) {DRM_DEBUG_KMS("Unknown FB ID%d\n",crtc_req->fb_id);ret = -ENOENT;goto out;}}mode = drm_mode_create(dev);if (!mode) {ret = -ENOMEM;goto out;}if (!file_priv->aspect_ratio_allowed &&(crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
if (!old_fb) {DRM_DEBUG_KMS("CRTC doesn't have current FB\n"); ret = -EINVAL; goto out;
ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);if (ret) {DRM_DEBUG_KMS("Invalid mode\n");
fb = old_fb;/* Make refcounting symmetric with the lookup path. */drm_framebuffer_get(fb);- } else {
fb = drm_framebuffer_lookup(dev, file_priv, crtc_req->fb_id);if (!fb) {DRM_DEBUG_KMS("Unknown FB ID%d\n",crtc_req->fb_id);ret = -ENOENT; goto out;
/** Check whether the primary plane supports the fb pixel format.* Drivers not implementing the universal planes API use a* default formats list provided by the DRM core which doesn't* match real hardware capabilities. Skip the check in that* case.*/if (!plane->format_default) {ret = drm_plane_check_pixel_format(plane,fb->format->format,fb->modifier);if (ret) {struct drm_format_name_buf format_name;DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n",drm_get_format_name(fb->format->format,&format_name),fb->modifier);goto out;}}ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,mode, fb);if (ret)goto out;}
if (crtc_req->count_connectors == 0 && mode) {
DRM_DEBUG_KMS("Count connectors is 0 but mode set\n");ret = -EINVAL;
- mode = drm_mode_create(dev);
- if (!mode) {
ret = -ENOMEM;
- if (crtc_req->count_connectors > 0 && (!mode || !fb)) {
DRM_DEBUG_KMS("Count connectors is %d but no mode or fb set\n",crtc_req->count_connectors);ret = -EINVAL;
- ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
- if (ret) {
DRM_DEBUG_KMS("Invalid mode\n");
- if (crtc_req->count_connectors > 0) {
u32 out_id;
- /*
* Check whether the primary plane supports the fb pixel format.* Drivers not implementing the universal planes API use a* default formats list provided by the DRM core which doesn't* match real hardware capabilities. Skip the check in that* case.*/- if (!plane->format_default) {
ret = drm_plane_check_pixel_format(plane,fb->format->format,fb->modifier);if (ret) {struct drm_format_name_buf format_name;
/* Avoid unbounded kernel memory allocation */if (crtc_req->count_connectors > config->num_connector) {ret = -EINVAL;
DRM_DEBUG_KMS("Invalid pixel format %s, modifier 0x%llx\n",drm_get_format_name(fb->format->format,&format_name),fb->modifier); goto out;- }
connector_set = kmalloc_array(crtc_req->count_connectors,
- ret = drm_crtc_check_viewport(crtc, crtc_req->x, crtc_req->y,
mode, fb);- if (ret)
goto out;- connector_set = kmalloc_array(crtc_req->count_connectors, sizeof(struct drm_connector *), GFP_KERNEL);
if (!connector_set) {ret = -ENOMEM;goto out;}
- if (!connector_set) {
ret = -ENOMEM;goto out;- }
for (i = 0; i < crtc_req->count_connectors; i++) {connector_set[i] = NULL;set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;if (get_user(out_id, &set_connectors_ptr[i])) {ret = -EFAULT;goto out;}
- for (i = 0; i < crtc_req->count_connectors; i++) {
u32 out_id;
connector = drm_connector_lookup(dev, file_priv, out_id);if (!connector) {DRM_DEBUG_KMS("Connector id %d unknown\n",out_id);ret = -ENOENT;goto out;}DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",connector->base.id,connector->name);
connector_set[i] = NULL;set_connectors_ptr =(uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr;if (get_user(out_id, &set_connectors_ptr[i])) {ret = -EFAULT;goto out;}
connector_set[i] = connector;
connector = drm_connector_lookup(dev, file_priv, out_id);if (!connector) {DRM_DEBUG_KMS("Connector id %d unknown\n",out_id);ret = -ENOENT;goto out;}
DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",connector->base.id,connector->name);connector_set[i] = connector;}
set.crtc = crtc;
@@ -735,6 +724,11 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, ret = __drm_mode_set_config_internal(&set, &ctx);
out:
- if (ret == -EDEADLK) {
ret = drm_modeset_backoff(&ctx);if (!ret)goto retry;- } if (fb) drm_framebuffer_put(fb);
@@ -743,14 +737,9 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, if (connector_set[i]) drm_connector_put(connector_set[i]); }
kfree(connector_set);
- kfree(connector_set); drm_mode_destroy(dev, mode);
- if (ret == -EDEADLK) {
ret = drm_modeset_backoff(&ctx);if (!ret)goto retry;- } drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); mutex_unlock(&crtc->dev->mode_config.mutex);