[PATCH v3 18/18] arm64: dts: allwinner: a64: sopine: Enable HDMI output

Enable all necessary HDMI pipeline nodes with HDMI out connector on sopine board.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v3: - Enable all pipeline components Changes for v2: - none

.../allwinner/sun50i-a64-sopine-baseboard.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index c21f2331add6..050e0ff92145 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -61,6 +61,17 @@ stdout-path = "serial0:115200n8"; };

+ connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + reg_vcc1v8: vcc1v8 { compatible = "regulator-fixed"; regulator-name = "vcc1v8"; @@ -69,6 +80,10 @@ }; };

+&de { + status = "okay"; +}; + &ehci0 { status = "okay"; }; @@ -86,6 +101,17 @@ status = "okay"; };

+&hdmi { + hvcc-supply = <&reg_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -93,6 +119,10 @@ }; };

+&mixer1 { + status = "okay"; +}; + &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; @@ -138,6 +168,10 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;