[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.0-drm+ (wfg@bee) (gcc version 4.5.0 (GCC) ) #14 SMP Mon Aug 1 16:39:14 CST 2011 [ 0.000000] Command line: BOOT_IMAGE=x86_64/vmlinuz log_buf_len=8M debug sched_debug apic=debug dynamic_printk drm.debug=6 panic=10 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@10.239.97.14/00:30:48:fe:19:94 ip=10.239.47.20:10.239.97.14:10.239.47.241:255.255.255.0:wu-kexec:eth0:none nfsroot=10.239.97.14:/nfsroot/wfg,tcp,v3,nocto,nolock,rsize=524288,wsize=524288 rw kexec_jump_back_entry=0x6f637465 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000100 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000aac8f000 (usable) [ 0.000000] BIOS-e820: 00000000aac8f000 - 00000000aadd4000 (reserved) [ 0.000000] BIOS-e820: 00000000aadd4000 - 00000000aade2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000aade2000 - 00000000aae65000 (reserved) [ 0.000000] BIOS-e820: 00000000aae65000 - 00000000aae68000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000aae68000 - 00000000aaf17000 (reserved) [ 0.000000] BIOS-e820: 00000000aaf17000 - 00000000aaf1b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000aaf1b000 - 00000000aaf1f000 (reserved) [ 0.000000] BIOS-e820: 00000000aaf1f000 - 00000000aaf9f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000aaf9f000 - 00000000aafff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000aafff000 - 00000000ab000000 (usable) [ 0.000000] BIOS-e820: 00000000ab000000 - 00000000ab800000 (reserved) [ 0.000000] BIOS-e820: 00000000abe00000 - 00000000b0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000014f800000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: LENOVO 20086,4396/Emerald Lake, BIOS 43CN18WW 12/07/2010 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x14f800 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable [ 0.000000] 4 base 0AC000000 mask FFC000000 uncachable [ 0.000000] 5 base 0AB000000 mask FFF000000 uncachable [ 0.000000] 6 base 100000000 mask FC0000000 write-back [ 0.000000] 7 base 140000000 mask FE0000000 write-back [ 0.000000] 8 base 150000000 mask FF0000000 uncachable [ 0.000000] 9 base 14F800000 mask FFF800000 uncachable [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xab000 max_arch_pfn = 0x400000000 [ 0.000000] Scan SMP from ffff880000000000 for 1024 bytes. [ 0.000000] Scan SMP from ffff88000009fc00 for 1024 bytes. [ 0.000000] Scan SMP from ffff8800000f0000 for 65536 bytes. [ 0.000000] Scan SMP from ffff88000009d800 for 1024 bytes. [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-00000000ab000000 [ 0.000000] 0000000000 - 00ab000000 page 4k [ 0.000000] kernel direct mapping tables up to ab000000 @ aa733000-aac8f000 [ 0.000000] init_memory_mapping: 0000000100000000-000000014f800000 [ 0.000000] 0100000000 - 014f800000 page 4k [ 0.000000] kernel direct mapping tables up to 14f800000 @ 14ed7d000-14f800000 [ 0.000000] log_buf_len: 8388608 [ 0.000000] early log buf free: 257165(98%) [ 0.000000] ACPI: RSDP 00000000000f0110 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT 00000000aaffe120 00084 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: FACP 00000000aafee000 000F4 (v03 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: DSDT 00000000aaff1000 0989C (v02 LENOVO SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000aaf40000 00040 [ 0.000000] ACPI: SLIC 00000000aaffd000 00176 (v01 LENOVO CB-01 00000001 LENO 00000001) [ 0.000000] ACPI: SSDT 00000000aaffb000 01068 (v01 LENOVO PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000aaff0000 000A5 (v32 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: HPET 00000000aafed000 00038 (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: APIC 00000000aafec000 00098 (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: MCFG 00000000aafeb000 0003C (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: SSDT 00000000aafea000 0090C (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000aafe9000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000aafe8000 0003E (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000aafe7000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000aafe6000 00242 (v01 LENOVO CB-01 00000001 PTL 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000014f800000 [ 0.000000] Initmem setup node 0 0000000000000000-000000014f800000 [ 0.000000] NODE_DATA [000000014effb000 - 000000014effffff] [ 0.000000] [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014a400000-ffff88014ddfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0014f800 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000aac8f [ 0.000000] 0: 0x000aafff -> 0x000ab000 [ 0.000000] 0: 0x00100000 -> 0x0014f800 [ 0.000000] On node 0 totalpages: 1025053 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 681160 pages, LIFO batch:31 [ 0.000000] Normal zone: 4452 pages used for memmap [ 0.000000] Normal zone: 321180 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fc000 ( fee00000) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fb000 (fec00000) [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000aac8f000 - 00000000aadd4000 [ 0.000000] PM: Registered nosave memory: 00000000aadd4000 - 00000000aade2000 [ 0.000000] PM: Registered nosave memory: 00000000aade2000 - 00000000aae65000 [ 0.000000] PM: Registered nosave memory: 00000000aae65000 - 00000000aae68000 [ 0.000000] PM: Registered nosave memory: 00000000aae68000 - 00000000aaf17000 [ 0.000000] PM: Registered nosave memory: 00000000aaf17000 - 00000000aaf1b000 [ 0.000000] PM: Registered nosave memory: 00000000aaf1b000 - 00000000aaf1f000 [ 0.000000] PM: Registered nosave memory: 00000000aaf1f000 - 00000000aaf9f000 [ 0.000000] PM: Registered nosave memory: 00000000aaf9f000 - 00000000aafff000 [ 0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000ab800000 [ 0.000000] PM: Registered nosave memory: 00000000ab800000 - 00000000abe00000 [ 0.000000] PM: Registered nosave memory: 00000000abe00000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:48000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 474 pages/cpu @ffff880149400000 s1910784 r8192 d22528 u2097152 [ 0.000000] pcpu-alloc: s1910784 r8192 d22528 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006260 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=x86_64/vmlinuz log_buf_len=8M debug sched_debug apic=debug dynamic_printk drm.debug=6 panic=10 unknown_nmi_panic=1 nmi_watchdog=panic,lapic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 netconsole=@:/eth0,6666@10.239.97.14/00:30:48:fe:19:94 ip=10.239.47.20:10.239.97.14:10.239.47.241:255.255.255.0:wu-kexec:eth0:none nfsroot=10.239.97.14:/nfsroot/wfg,tcp,v3,nocto,nolock,rsize=524288,wsize=524288 rw kexec_jump_back_entry=0x6f637465 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Memory: 3916068k/5496832k available (9400k kernel code, 1396620k absent, 184144k reserved, 5543k data, 2736k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.000000] ... MAX_LOCK_DEPTH: 48 [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191 [ 0.000000] ... CLASSHASH_SIZE: 4096 [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384 [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768 [ 0.000000] ... CHAINHASH_SIZE: 16384 [ 0.000000] memory used by lock dependency info: 6335 kB [ 0.000000] per task-struct memory footprint: 2688 bytes [ 0.000000] allocated 33554432 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 1995.540 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 3991.08 BogoMIPS (lpj=1995540) [ 0.000923] pid_max: default: 32768 minimum: 301 [ 0.002811] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.004972] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.006012] Mount-cache hash table entries: 256 [ 0.006870] Initializing cgroup subsys debug [ 0.007283] Initializing cgroup subsys cpuacct [ 0.007693] Initializing cgroup subsys memory [ 0.008141] Initializing cgroup subsys devices [ 0.008544] Initializing cgroup subsys freezer [ 0.008946] Initializing cgroup subsys blkio [ 0.009427] Disabled fast string operations [ 0.009813] CPU: Physical Processor ID: 0 [ 0.010206] CPU: Processor Core ID: 0 [ 0.010561] mce: CPU supports 9 MCE banks [ 0.010947] CPU0: Thermal monitoring enabled (TM1) [ 0.011402] using mwait in idle threads. [ 0.013395] ACPI: Core revision 20110413 [ 0.038429] ftrace: allocating 35893 entries in 141 pages [ 0.052119] Getting VERSION: 1060015 [ 0.052466] Getting VERSION: 1060015 [ 0.052811] Getting ID: 0 [ 0.053112] Getting ID: 0 [ 0.053396] enabled ExtINT on CPU#0 [ 0.054000] ENABLING IO-APIC IRQs [ 0.054328] init IO_APIC IRQs [ 0.054633] apic 2 pin 0 not connected [ 0.055017] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 0.055662] IOAPIC[0]: Set routing entry (2-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) [ 0.056324] IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) [ 0.056974] IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0) [ 0.057618] IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0) [ 0.058267] IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0) [ 0.058912] IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0) [ 0.059560] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 0.060210] IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:0) [ 0.060856] IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0) [ 0.061514] IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0) [ 0.062174] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 0.062830] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 0.063490] IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0) [ 0.064151] IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0) [ 0.064806] apic 2 pin 16 not connected [ 0.065177] apic 2 pin 17 not connected [ 0.065545] apic 2 pin 18 not connected [ 0.065911] apic 2 pin 19 not connected [ 0.066282] apic 2 pin 20 not connected [ 0.066649] apic 2 pin 21 not connected [ 0.067019] apic 2 pin 22 not connected [ 0.067386] apic 2 pin 23 not connected [ 0.067901] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078408] CPU0: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz stepping 07 [ 0.079077] Using local APIC timer interrupts. [ 0.079078] calibrating APIC timer ... [ 0.180923] ... lapic delta = 623578 [ 0.181266] ... PM-Timer delta = 357951 [ 0.181626] ... PM-Timer result ok [ 0.181959] ..... delta 623578 [ 0.182269] ..... mult: 26786542 [ 0.182590] ..... calibration result: 99772 [ 0.182975] ..... CPU clock speed is 1995.0450 MHz. [ 0.183405] ..... host bus clock speed is 99.0772 MHz. [ 0.183862] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver. [ 0.184700] ... version: 3 [ 0.185077] ... bit width: 48 [ 0.185455] ... generic registers: 4 [ 0.185828] ... value mask: 0000ffffffffffff [ 0.186287] ... max period: 000000007fffffff [ 0.186743] ... fixed-purpose events: 3 [ 0.187119] ... event mask: 000000070000000f [ 0.188009] lockdep: fixing up alternatives. [ 0.188484] Booting Node 0, Processors #1 [ 0.188879] smpboot cpu 1: start_ip = 98000 [ 0.200612] masked ExtINT on CPU#1 [ 0.259837] Disabled fast string operations [ 0.280420] lockdep: fixing up alternatives. [ 0.280851] #2 [ 0.281015] smpboot cpu 2: start_ip = 98000 [ 0.292632] masked ExtINT on CPU#2 [ 0.352794] Disabled fast string operations [ 0.373311] lockdep: fixing up alternatives. [ 0.373738] #3 [ 0.373907] smpboot cpu 3: start_ip = 98000 [ 0.385522] masked ExtINT on CPU#3 [ 0.444752] Disabled fast string operations [ 0.465296] lockdep: fixing up alternatives. [ 0.465726] #4 [ 0.465895] smpboot cpu 4: start_ip = 98000 [ 0.477511] masked ExtINT on CPU#4 [ 0.537710] Disabled fast string operations [ 0.558294] lockdep: fixing up alternatives. [ 0.558724] #5 [ 0.558888] smpboot cpu 5: start_ip = 98000 [ 0.570505] masked ExtINT on CPU#5 [ 0.630668] Disabled fast string operations [ 0.651191] lockdep: fixing up alternatives. [ 0.651621] #6 [ 0.651790] smpboot cpu 6: start_ip = 98000 [ 0.663406] masked ExtINT on CPU#6 [ 0.722627] Disabled fast string operations [ 0.743187] lockdep: fixing up alternatives. [ 0.743618] #7 Ok. [ 0.743867] smpboot cpu 7: start_ip = 98000 [ 0.755359] masked ExtINT on CPU#7 [ 0.814585] Disabled fast string operations [ 0.834994] Brought up 8 CPUs [ 0.835301] Total of 8 processors activated (31924.09 BogoMIPS). [ 0.841536] CPU0 attaching sched-domain: [ 0.841913] domain 0: span 0-1 level SIBLING [ 0.843782] groups: 0 (cpu_power = 589) 1 (cpu_power = 589) [ 0.844580] domain 1: span 0-7 level MC [ 0.845014] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) [ 0.846411] CPU1 attaching sched-domain: [ 0.846781] domain 0: span 0-1 level SIBLING [ 0.847238] groups: 1 (cpu_power = 589) 0 (cpu_power = 589) [ 0.848034] domain 1: span 0-7 level MC [ 0.848468] groups: 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) [ 0.849867] CPU2 attaching sched-domain: [ 0.850236] domain 0: span 2-3 level SIBLING [ 0.850696] groups: 2 (cpu_power = 589) 3 (cpu_power = 589) [ 0.851488] domain 1: span 0-7 level MC [ 0.851926] groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.853322] CPU3 attaching sched-domain: [ 0.853693] domain 0: span 2-3 level SIBLING [ 0.854150] groups: 3 (cpu_power = 589) 2 (cpu_power = 589) [ 0.854946] domain 1: span 0-7 level MC [ 0.855380] groups: 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) [ 0.856778] CPU4 attaching sched-domain: [ 0.857147] domain 0: span 4-5 level SIBLING [ 0.857607] groups: 4 (cpu_power = 589) 5 (cpu_power = 589) [ 0.858399] domain 1: span 0-7 level MC [ 0.858838] groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.860234] CPU5 attaching sched-domain: [ 0.860605] domain 0: span 4-5 level SIBLING [ 0.861062] groups: 5 (cpu_power = 589) 4 (cpu_power = 589) [ 0.861857] domain 1: span 0-7 level MC [ 0.862291] groups: 4-5 (cpu_power = 1178) 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) [ 0.863689] CPU6 attaching sched-domain: [ 0.864055] domain 0: span 6-7 level SIBLING [ 0.864511] groups: 6 (cpu_power = 589) 7 (cpu_power = 589) [ 0.865306] domain 1: span 0-7 level MC [ 0.865742] groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) [ 0.867141] CPU7 attaching sched-domain: [ 0.867507] domain 0: span 6-7 level SIBLING [ 0.867967] groups: 7 (cpu_power = 589) 6 (cpu_power = 589) [ 0.868764] domain 1: span 0-7 level MC [ 0.869198] groups: 6-7 (cpu_power = 1178) 0-1 (cpu_power = 1178) 2-3 (cpu_power = 1178) 4-5 (cpu_power = 1178) [ 0.871285] kworker/u:0 used greatest stack depth: 5304 bytes left [ 0.875012] PM: Registering ACPI NVS region at aadd4000 (57344 bytes) [ 0.875545] PM: Registering ACPI NVS region at aae65000 (12288 bytes) [ 0.876085] PM: Registering ACPI NVS region at aaf17000 (16384 bytes) [ 0.876619] PM: Registering ACPI NVS region at aaf1f000 (524288 bytes) [ 0.878138] xor: automatically using best checksumming function: generic_sse [ 0.883551] generic_sse: 8864.000 MB/sec [ 0.883941] xor: using function: generic_sse (8864.000 MB/sec) [ 0.884578] Time: 8:36:56 Date: 08/01/11 [ 0.885075] NET: Registered protocol family 16 [ 0.886506] ACPI: bus type pci registered [ 0.887174] dca service started, version 1.12.1 [ 0.887701] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.888471] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.905704] PCI: Using configuration type 1 for base access [ 0.941257] bio: create slab at 0 [ 0.958518] raid6: int64x1 2089 MB/s [ 0.975527] raid6: int64x2 2195 MB/s [ 0.992524] raid6: int64x4 1941 MB/s [ 1.009522] raid6: int64x8 1503 MB/s [ 1.026490] raid6: sse2x1 5355 MB/s [ 1.043481] raid6: sse2x2 6656 MB/s [ 1.060473] raid6: sse2x4 7585 MB/s [ 1.060829] raid6: using algorithm sse2x4 (7585 MB/s) [ 1.072195] ACPI: EC: Look up EC in DSDT [ 1.083568] ACPI: Executed 1 blocks of module-level executable AML code [ 1.102782] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 1.104507] ACPI: SSDT 00000000aaf0f698 0060F (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 1.108177] ACPI: Dynamic OEM Table Load: [ 1.108678] ACPI: SSDT (null) 0060F (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 1.115390] ACPI: SSDT 00000000aaf10a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 1.119245] ACPI: Dynamic OEM Table Load: [ 1.119748] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 1.125820] ACPI: SSDT 00000000aae6bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 1.129535] ACPI: Dynamic OEM Table Load: [ 1.130030] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 1.145224] ACPI: Interpreter enabled [ 1.145581] ACPI: (supports S0 S1 S3 S4 S5) [ 1.146336] ACPI: Using IOAPIC for interrupt routing [ 1.176153] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 1.177600] ACPI: No dock devices found. [ 1.177971] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.180000] \_SB_.PCI0:_OSC invalid UUID [ 1.180368] _OSC request data:1 8 1f [ 1.180973] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 1.183770] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.184315] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.184863] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.185504] pci_root PNP0A08:00: host bridge window [mem 0xb0000000-0xfeafffff] [ 1.186143] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff] [ 1.186818] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600 [ 1.187401] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300 [ 1.187928] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] [ 1.188487] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 1.189067] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 1.189660] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780 [ 1.190204] pci 0000:00:16.0: reg 10: [mem 0xc0605000-0xc060500f 64bit] [ 1.190879] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 1.191392] pci 0000:00:16.0: PME# disabled [ 1.191853] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03 [ 1.192392] pci 0000:00:1a.0: reg 10: [mem 0xc060a000-0xc060a3ff] [ 1.193063] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 1.193579] pci 0000:00:1a.0: PME# disabled [ 1.194012] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403 [ 1.194547] pci 0000:00:1b.0: reg 10: [mem 0xc0600000-0xc0603fff 64bit] [ 1.195225] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.195742] pci 0000:00:1b.0: PME# disabled [ 1.196166] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604 [ 1.196807] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.197321] pci 0000:00:1c.0: PME# disabled [ 1.197759] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604 [ 1.198397] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 1.198915] pci 0000:00:1c.1: PME# disabled [ 1.199346] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604 [ 1.199985] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 1.200501] pci 0000:00:1c.3: PME# disabled [ 1.200950] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03 [ 1.201490] pci 0000:00:1d.0: reg 10: [mem 0xc0609000-0xc06093ff] [ 1.202154] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 1.202670] pci 0000:00:1d.0: PME# disabled [ 1.203100] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601 [ 1.203856] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106 [ 1.204398] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 1.204881] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097] [ 1.205361] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 1.205844] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093] [ 1.206323] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 1.206806] pci 0000:00:1f.2: reg 24: [mem 0xc0608000-0xc06087ff] [ 1.207403] pci 0000:00:1f.2: PME# supported from D3hot [ 1.207860] pci 0000:00:1f.2: PME# disabled [ 1.208281] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 [ 1.208816] pci 0000:00:1f.3: reg 10: [mem 0xc0604000-0xc06040ff 64bit] [ 1.209411] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 1.210033] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.210494] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.211070] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.211748] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.212825] pci 0000:02:00.0: [8086:0084] type 0 class 0x000280 [ 1.213684] pci 0000:02:00.0: reg 10: [mem 0xc0500000-0xc0501fff 64bit] [ 1.215660] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.216221] pci 0000:02:00.0: PME# disabled [ 1.216864] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.217321] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 1.217901] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 1.218468] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.219347] pci 0000:03:00.0: [10ec:8168] type 0 class 0x000200 [ 1.219922] pci 0000:03:00.0: reg 10: [io 0x2000-0x20ff] [ 1.220529] pci 0000:03:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 1.221185] pci 0000:03:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 1.222012] pci 0000:03:00.0: supports D1 D2 [ 1.222404] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.222963] pci 0000:03:00.0: PME# disabled [ 1.223459] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 1.223916] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.224433] pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.225110] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.225815] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.226714] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 1.228762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 1.229415] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 1.230280] \_SB_.PCI0:_OSC invalid UUID [ 1.230653] _OSC request data:1 19 1f [ 1.231256] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x19) [ 1.244465] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 1.245937] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 1.247406] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7, disabled. [ 1.249123] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 1.250591] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.252296] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 1.254010] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15), disabled. [ 1.255650] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 1.257369] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 1.258088] vgaarb: loaded [ 1.258380] vgaarb: bridge control possible 0000:00:02.0 [ 1.259155] SCSI subsystem initialized [ 1.259782] libata version 3.00 loaded. [ 1.260553] usbcore: registered new interface driver usbfs [ 1.261120] usbcore: registered new interface driver hub [ 1.261695] usbcore: registered new device driver usb [ 1.263379] wmi: Mapper loaded [ 1.263797] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 1.264323] PCI: Using ACPI for IRQ routing [ 1.268602] PCI: pci_cache_line_size set to 64 bytes [ 1.269232] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 1.269700] reserve RAM buffer: 00000000aac8f000 - 00000000abffffff [ 1.270289] reserve RAM buffer: 00000000ab000000 - 00000000abffffff [ 1.270881] reserve RAM buffer: 000000014f800000 - 000000014fffffff [ 1.271939] [ 1.271939] printing PIC contents [ 1.272612] ... PIC IMR: ffff [ 1.272926] ... PIC IRR: 0c00 [ 1.273250] ... PIC ISR: 0000 [ 1.273569] ... PIC ELCR: 0e00 [ 1.273881] printing local APIC contents on CPU#0/0: [ 1.274315] ... APIC ID: 00000000 (0) [ 1.274693] ... APIC VERSION: 01060015 [ 1.275048] ... APIC TASKPRI: 00000000 (00) [ 1.275431] ... APIC PROCPRI: 00000000 [ 1.275787] ... APIC LDR: 01000000 [ 1.276119] ... APIC DFR: ffffffff [ 1.276452] ... APIC SPIV: 000001ff [ 1.276791] ... APIC ISR field: [ 1.277106] 0000000000000000000000000000000000000000000000000000000000000000 [ 1.278166] ... APIC TMR field: [ 1.278482] 0000000002000000000000000000000000000000000000000000000000000000 [ 1.279541] ... APIC IRR field: [ 1.279857] 0000000000000000000000000000000000000000000000000000000000008000 [ 1.280916] ... APIC ESR: 00000000 [ 1.281249] ... APIC ICR: 000008fd [ 1.281581] ... APIC ICR2: 02000000 [ 1.281921] ... APIC LVTT: 000200ef [ 1.282258] ... APIC LVTPC: 00000400 [ 1.282601] ... APIC LVT0: 00010700 [ 1.282941] ... APIC LVT1: 00000400 [ 1.283278] ... APIC LVTERR: 000000fe [ 1.283627] ... APIC TMICT: 0000185b [ 1.283971] ... APIC TMCCT: 00000983 [ 1.284316] ... APIC TDCR: 00000003 [ 1.284653] [ 1.284866] number of MP IRQ sources: 15. [ 1.285240] number of IO-APIC #2 registers: 24. [ 1.285649] testing the IO APIC....................... [ 1.286103] [ 1.286312] IO APIC #2...... [ 1.286617] .... register #00: 02000000 [ 1.286979] ....... : physical APIC id: 02 [ 1.287376] ....... : Delivery Type: 0 [ 1.287749] ....... : LTS : 0 [ 1.288123] .... register #01: 00170020 [ 1.288488] ....... : max redirection entries: 0017 [ 1.288940] ....... : PRQ implemented: 0 [ 1.289329] ....... : IO APIC version: 0020 [ 1.289739] .... IRQ redirection table: [ 1.290101] NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: [ 1.290581] 00 000 1 0 0 0 0 0 0 00 [ 1.291101] 01 0FF 0 0 0 0 0 1 1 31 [ 1.291623] 02 0FF 0 0 0 0 0 1 1 30 [ 1.292142] 03 0FF 0 0 0 0 0 1 1 33 [ 1.292664] 04 0FF 0 0 0 0 0 1 1 34 [ 1.293182] 05 0FF 0 0 0 0 0 1 1 35 [ 1.293704] 06 0FF 0 0 0 0 0 1 1 36 [ 1.294221] 07 0FF 0 0 0 0 0 1 1 37 [ 1.294745] 08 0FF 0 0 0 0 0 1 1 38 [ 1.295265] 09 0FF 0 1 0 0 0 1 1 39 [ 1.295787] 0a 0FF 0 0 0 0 0 1 1 3A [ 1.296305] 0b 0FF 0 0 0 0 0 1 1 3B [ 1.296827] 0c 0FF 0 0 0 0 0 1 1 3C [ 1.297344] 0d 0FF 0 0 0 0 0 1 1 3D [ 1.297866] 0e 0FF 0 0 0 0 0 1 1 3E [ 1.298390] 0f 0FF 0 0 0 0 0 1 1 3F [ 1.298910] 10 000 1 0 0 0 0 0 0 00 [ 1.299429] 11 000 1 0 0 0 0 0 0 00 [ 1.299947] 12 000 1 0 0 0 0 0 0 00 [ 1.300469] 13 000 1 0 0 0 0 0 0 00 [ 1.300987] 14 000 1 0 0 0 0 0 0 00 [ 1.301508] 15 000 1 0 0 0 0 0 0 00 [ 1.302028] 16 000 1 0 0 0 0 0 0 00 [ 1.302553] 17 000 1 0 0 0 0 0 0 00 [ 1.303066] IRQ to pin mappings: [ 1.303392] IRQ0 -> 0:2 [ 1.303786] IRQ1 -> 0:1 [ 1.304177] IRQ3 -> 0:3 [ 1.304575] IRQ4 -> 0:4 [ 1.304969] IRQ5 -> 0:5 [ 1.305365] IRQ6 -> 0:6 [ 1.305758] IRQ7 -> 0:7 [ 1.306151] IRQ8 -> 0:8 [ 1.306550] IRQ9 -> 0:9 [ 1.306943] IRQ10 -> 0:10 [ 1.307347] IRQ11 -> 0:11 [ 1.307755] IRQ12 -> 0:12 [ 1.308161] IRQ13 -> 0:13 [ 1.308568] IRQ14 -> 0:14 [ 1.308972] IRQ15 -> 0:15 [ 1.309380] .................................... done. [ 1.309839] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.310915] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.313429] Switching to clocksource hpet [ 1.314362] Switched to NOHz mode on CPU #0 [ 1.314725] Switched to NOHz mode on CPU #2 [ 1.314731] Switched to NOHz mode on CPU #5 [ 1.314752] Switched to NOHz mode on CPU #3 [ 1.314784] Switched to NOHz mode on CPU #1 [ 1.314787] Switched to NOHz mode on CPU #7 [ 1.314789] Switched to NOHz mode on CPU #6 [ 1.314794] Switched to NOHz mode on CPU #4 [ 1.355293] pnp: PnP ACPI init [ 1.355631] ACPI: bus type pnp registered [ 1.357151] pnp 00:00: [bus 00-3e] [ 1.357487] pnp 00:00: [io 0x0000-0x0cf7 window] [ 1.357906] pnp 00:00: [io 0x0cf8-0x0cff] [ 1.358302] pnp 00:00: [io 0x0d00-0xffff window] [ 1.358722] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 1.359195] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 1.359659] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 1.360132] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 1.360596] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 1.361067] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 1.361530] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 1.362003] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 1.362466] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 1.362929] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 1.363408] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 1.363870] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 1.364345] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 1.364807] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 1.365280] pnp 00:00: [mem 0xb0000000-0xfeafffff window] [ 1.365746] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 1.366516] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 1.367205] pnp 00:01: [io 0x0000-0x001f] [ 1.367585] pnp 00:01: [io 0x0081-0x0091] [ 1.367963] pnp 00:01: [io 0x0093-0x009f] [ 1.368355] pnp 00:01: [io 0x00c0-0x00df] [ 1.368734] pnp 00:01: [dma 4] [ 1.369192] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.369750] pnp 00:02: [mem 0xff000000-0xffffffff] [ 1.370325] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 1.371080] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 1.371651] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 1.372232] pnp 00:04: [io 0x00f0] [ 1.372577] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0) [ 1.373244] pnp 00:04: [irq 13] [ 1.373715] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.374294] pnp 00:05: [io 0x002e-0x002f] [ 1.374674] pnp 00:05: [io 0x004e-0x004f] [ 1.375063] pnp 00:05: [io 0x0061] [ 1.375401] pnp 00:05: [io 0x0063] [ 1.375739] pnp 00:05: [io 0x0065] [ 1.376087] pnp 00:05: [io 0x0067] [ 1.376426] pnp 00:05: [io 0x0070] [ 1.378191] pnp 00:05: [io 0x0080] [ 1.378530] pnp 00:05: [io 0x0092] [ 1.378870] pnp 00:05: [io 0x00b2-0x00b3] [ 1.379259] pnp 00:05: [io 0x1000-0x100f] [ 1.379638] pnp 00:05: [io 0xffff] [ 1.379986] pnp 00:05: [io 0xffff] [ 1.380325] pnp 00:05: [io 0x0400-0x0453] [ 1.380703] pnp 00:05: [io 0x0458-0x047f] [ 1.381091] pnp 00:05: [io 0x0500-0x057f] [ 1.381469] pnp 00:05: [io 0x0068-0x006f] [ 1.381848] pnp 00:05: [mem 0xfe800000-0xfe80ffff] [ 1.382474] system 00:05: [io 0x1000-0x100f] has been reserved [ 1.382990] system 00:05: [io 0xffff] has been reserved [ 1.383447] system 00:05: [io 0xffff] has been reserved [ 1.383907] system 00:05: [io 0x0400-0x0453] has been reserved [ 1.384421] system 00:05: [io 0x0458-0x047f] has been reserved [ 1.384919] system 00:05: [io 0x0500-0x057f] has been reserved [ 1.385434] system 00:05: [mem 0xfe800000-0xfe80ffff] has been reserved [ 1.385988] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.386563] pnp 00:06: [io 0x0070-0x0077] [ 1.386944] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0) [ 1.387603] pnp 00:06: [irq 8] [ 1.388073] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.388700] pnp 00:07: [io 0x0454-0x0457] [ 1.389276] system 00:07: [io 0x0454-0x0457] has been reserved [ 1.389778] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 1.390616] pnp 00:08: [io 0x0060] [ 1.390956] pnp 00:08: [io 0x0064] [ 1.391312] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) [ 1.391956] pnp 00:08: [irq 1] [ 1.392437] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 1.393017] IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0) [ 1.393674] pnp 00:09: [irq 12] [ 1.394155] pnp 00:09: Plug and Play ACPI device, IDs ETD0605 ETD0001 ETD0002 PNP0f13 (active) [ 1.395248] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] [ 1.395673] pnp 00:0a: [mem 0xfed10000-0xfed17fff] [ 1.396107] pnp 00:0a: [mem 0xfed18000-0xfed18fff] [ 1.396531] pnp 00:0a: [mem 0xfed19000-0xfed19fff] [ 1.396976] pnp 00:0a: [mem 0xf8000000-0xfbffffff] [ 1.397400] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] [ 1.397823] pnp 00:0a: [mem 0xfed90000-0xfed93fff] [ 1.398257] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] [ 1.398680] pnp 00:0a: [mem 0xff000000-0xffffffff] [ 1.399114] pnp 00:0a: [mem 0xfee00000-0xfeefffff] [ 1.399537] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled] [ 1.400262] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.400807] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved [ 1.401365] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved [ 1.401908] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved [ 1.402466] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved [ 1.403018] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.403562] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved [ 1.404113] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved [ 1.404657] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved [ 1.405231] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved [ 1.405798] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 1.407242] pnp 00:0b: [mem 0x20000000-0x201fffff] [ 1.407665] pnp 00:0b: [mem 0x40000000-0x401fffff] [ 1.408392] system 00:0b: [mem 0x20000000-0x201fffff] could not be reserved [ 1.408976] system 00:0b: [mem 0x40000000-0x401fffff] could not be reserved [ 1.409544] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.410172] pnp: PnP ACPI: found 12 devices [ 1.410556] ACPI: ACPI bus type pnp unregistered [ 1.424669] PCI: max bus depth: 1 pci_try_num: 2 [ 1.425147] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 1.425598] pci 0000:00:1c.0: bridge window [io disabled] [ 1.426095] pci 0000:00:1c.0: bridge window [mem disabled] [ 1.426579] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 1.427107] pci 0000:00:1c.1: PCI bridge to [bus 02-02] [ 1.427559] pci 0000:00:1c.1: bridge window [io disabled] [ 1.428058] pci 0000:00:1c.1: bridge window [mem 0xc0500000-0xc05fffff] [ 1.428616] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 1.429144] pci 0000:00:1c.3: PCI bridge to [bus 03-03] [ 1.429597] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 1.430122] pci 0000:00:1c.3: bridge window [mem disabled] [ 1.430607] pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.431313] IOAPIC[0]: Set routing entry (2-16 -> 0x29 -> IRQ 16 Mode:1 Active:1) [ 1.431976] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.432528] pci 0000:00:1c.0: setting latency timer to 64 [ 1.433017] IOAPIC[0]: Set routing entry (2-17 -> 0x41 -> IRQ 17 Mode:1 Active:1) [ 1.433670] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.434233] pci 0000:00:1c.1: setting latency timer to 64 [ 1.434716] IOAPIC[0]: Set routing entry (2-19 -> 0x49 -> IRQ 19 Mode:1 Active:1) [ 1.435378] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.435929] pci 0000:00:1c.3: setting latency timer to 64 [ 1.436410] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.436884] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.437375] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.437894] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xfeafffff] [ 1.438430] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 1.438961] pci_bus 0000:02: resource 1 [mem 0xc0500000-0xc05fffff] [ 1.439483] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff] [ 1.439968] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 1.440687] NET: Registered protocol family 2 [ 1.441645] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.446169] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.449893] TCP bind hash table entries: 65536 (order: 10, 5242880 bytes) [ 1.453688] TCP: Hash tables configured (established 524288 bind 65536) [ 1.454260] TCP reno registered [ 1.454708] UDP hash table entries: 2048 (order: 6, 393216 bytes) [ 1.455563] UDP-Lite hash table entries: 2048 (order: 6, 393216 bytes) [ 1.456643] NET: Registered protocol family 1 [ 1.457334] RPC: Registered named UNIX socket transport module. [ 1.457832] RPC: Registered udp transport module. [ 1.458265] RPC: Registered tcp transport module. [ 1.458683] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.459236] pci 0000:00:02.0: Boot video device [ 1.459841] PCI: CLS 64 bytes, default 64 [ 1.460330] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.460862] Placing 64MB software IO TLB between ffff8800a6733000 - ffff8800aa733000 [ 1.461539] software IO TLB at phys 0xa6733000 - 0xaa733000 [ 1.462112] kvm: disabled by bios [ 1.467328] Machine check injector initialized [ 1.469901] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x6 [ 1.470431] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x6 [ 1.470953] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x6 [ 1.471457] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x6 [ 1.471964] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x6 [ 1.472470] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x6 [ 1.472974] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x6 [ 1.473479] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x6 [ 1.474088] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.475467] audit: initializing netlink socket (disabled) [ 1.475988] type=2000 audit(1312187816.212:1): initialized [ 1.514326] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.531755] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 1.532935] fuse init (API version 7.16) [ 1.534141] JFS: nTxBlock = 8192, nTxLock = 65536 [ 1.538872] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled [ 1.542443] NILFS version 2 loaded [ 1.544063] Btrfs loaded [ 1.544348] msgmni has been set to 7648 [ 1.546498] async_tx: api initialized (async) [ 1.547214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.547949] io scheduler noop registered [ 1.548318] io scheduler deadline registered [ 1.548932] io scheduler cfq registered (default) [ 1.550203] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.561134] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.562171] ACPI: AC Adapter [ADP1] (on-line) [ 1.563176] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 1.563962] ACPI: Lid Switch [LID0] [ 1.564464] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 1.565191] ACPI: Sleep Button [SLPB] [ 1.565706] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.566371] ACPI: Power Button [PWRF] [ 1.567543] ACPI: acpi_idle registered with cpuidle [ 1.581452] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.581953] ACPI: Thermal Zone [TZS0] (49 C) [ 1.582863] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.583370] ACPI: Thermal Zone [TZS1] (39 C) [ 1.584412] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 1.586947] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.587887] ACPI: Battery Slot [BAT0] (battery present) [ 1.652070] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.715398] Initializing Nozomi driver 2.1d [ 1.716829] Non-volatile memory driver v1.3 [ 1.717549] Linux agpgart interface v0.103 [ 1.718229] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset [ 1.720347] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable [ 1.722791] agpgart-intel 0000:00:00.0: detected 65536K stolen memory [ 1.723612] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 [ 1.724300] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 1.725060] Hangcheck: Using getrawmonotonic(). [ 1.725598] [drm] Initialized drm 1.1.0 20060810 [ 1.726057] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.726613] i915 0000:00:02.0: setting latency timer to 64 [ 1.803277] mtrr: type mismatch for b0000000,10000000 old: write-back new: write-combining [ 1.803991] [drm] MTRR allocation failed. Graphics performance may suffer. [ 1.806176] [drm:intel_opregion_setup], graphic opregion physical addr: 0xaae65018 [ 1.806928] [drm:intel_opregion_setup], Public ACPI methods supported [ 1.807520] [drm:intel_opregion_setup], SWSCI supported [ 1.808045] [drm:intel_opregion_setup], ASLE supported [ 1.808593] i915 0000:00:02.0: irq 40 for MSI/MSI-X [ 1.809038] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 1.809579] [drm] Driver supports precise vblank timestamp query. [ 1.810104] [drm:intel_detect_pch], Found CougarPoint PCH [ 1.810629] [drm:intel_parse_bios], Using VBT from OpRegion: $VBT SANDYBRIDGE-M d [ 1.811356] [drm:parse_general_definitions], crt_ddc_bus_pin: 2 [ 1.811925] [drm:parse_lfp_panel_data], Found panel mode in BIOS VBT tables: [ 1.812557] [drm:drm_mode_debug_printmodeline], Modeline 0:"1366x768" 0 71000 1366 1414 1446 1502 768 771 776 788 0x8 0xa [ 1.813506] [drm:parse_sdvo_panel_data], Found SDVO panel mode in BIOS VBT tables: [ 1.814235] [drm:drm_mode_debug_printmodeline], Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [ 1.815219] [drm:parse_sdvo_device_mapping], No SDVO device info is found in VBT [ 1.815944] [drm:intel_dsm_pci_probe], no _DSM method for intel device [ 1.816594] [drm:intel_modeset_init], 2 display pipes available. [ 1.817181] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 1.891870] [drm:intel_crt_init], pch crt adpa set to 0xf40000 [ 1.895198] [drm:intel_sdvo_read_byte], i2c transfer returned -6 [ 1.895763] [drm:intel_sdvo_init], No SDVO device found on SDVOB [ 1.896972] [drm:intel_dp_i2c_init], i2c_init DPDDC-B [ 1.897990] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 1.898588] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.899636] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 1.900244] [drm:intel_dp_i2c_aux_ch], aux_ch failed -110 [ 1.900903] [drm:intel_panel_get_backlight], get backlight PWM = 976 [ 1.901490] [drm:intel_panel_get_backlight], get backlight PWM = 976 [ 1.902092] [drm:intel_panel_set_backlight], set backlight PWM = 0 [ 1.902689] [drm:ironlake_crtc_dpms], crtc 0/0 dpms off [ 1.903248] [drm:i915_get_vblank_timestamp], crtc 0 is disabled [ 1.924246] [drm:intel_update_fbc], [ 1.924652] [drm:intel_update_fbc], no output, disabling [ 1.925377] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 1.925901] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.926656] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 1.927215] [drm:gm45_get_vblank_counter], trying to get vblank count for disabled pipe B [ 1.928644] [drm:intel_update_fbc], [ 1.929059] [drm:intel_update_fbc], no output, disabling [ 1.989253] [drm:init_status_page], render ring hws offset: 0x00000000 [ 1.990102] [drm:init_status_page], gen6 bsd ring hws offset: 0x00021000 [ 1.990931] [drm:init_status_page], blt ring hws offset: 0x00042000 [ 1.991708] [drm:i915_setup_compression], FBC base 0xfc000000, ll base 0x00000000, size 32M [ 1.992537] [drm:intel_panel_set_backlight], set backlight PWM = 0 [ 1.993147] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 1.993864] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 1.994649] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 1.995615] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 1.996326] [drm:intel_ironlake_crt_detect_hotplug], trigger hotplug detect cycle: adpa=0xf40000 [ 2.006802] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 2.007618] [drm:intel_crt_detect], CRT not detected via hotplug [ 2.008191] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 2.008974] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 2.153392] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 2.154029] [drm:drm_edid_to_eld], ELD monitor DELL 2709W [ 2.154555] HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2 [ 2.155367] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 2.299697] [drm:drm_edid_to_eld], ELD monitor DELL 2709W [ 2.300221] HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2 [ 2.301034] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 2.301570] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] probed modes : [ 2.302381] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 2.303381] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 2.304378] [drm:drm_mode_debug_printmodeline], Modeline 23:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 2.305377] [drm:drm_mode_debug_printmodeline], Modeline 25:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 2.306374] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.307373] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 2.308371] [drm:drm_mode_debug_printmodeline], Modeline 24:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 2.309341] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 2.310305] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 2.311270] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 2.312210] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 2.313151] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 2.314087] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 2.315024] [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 2.315961] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] [ 2.317170] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.320220] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.323219] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 2.325696] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 2.326250] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected [ 2.327028] [drm:drm_setup_crtcs], [ 2.327429] [drm:drm_enable_connectors], connector 5 enabled? yes [ 2.328009] [drm:drm_enable_connectors], connector 11 enabled? no [ 2.328578] [drm:drm_enable_connectors], connector 14 enabled? yes [ 2.329163] [drm:drm_enable_connectors], connector 17 enabled? no [ 2.329742] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 2.330442] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 2.331163] [drm:drm_target_preferred], found mode 1366x768 [ 2.331707] [drm:drm_target_preferred], looking for cmdline mode on connector 14 [ 2.332413] [drm:drm_target_preferred], looking for preferred mode on connector 14 [ 2.333139] [drm:drm_target_preferred], found mode 1920x1200 [ 2.333688] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 2.334283] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 2.334892] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4 [ 2.351761] [drm:intelfb_create], allocated 1920x1200 fb: 0x00063000, bo ffff880144c7e000 [ 2.352827] fbcon: inteldrmfb (fb0) is primary device [ 2.354430] [drm:drm_crtc_helper_set_config], [ 2.354432] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 2.354448] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 2.354451] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 2.354453] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.354457] [drm:drm_mode_debug_printmodeline], Modeline 34:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 2.354461] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 2.354463] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 2.354466] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.354469] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 2.354471] [drm:drm_mode_debug_printmodeline], Modeline 34:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 2.354477] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 2.354500] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [ 2.354527] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 2.354530] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 6 (max display bpc 6) [ 2.354738] [drm:ironlake_crtc_mode_set], Mode for pipe A: [ 2.354741] [drm:drm_mode_debug_printmodeline], Modeline 34:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 2.406670] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.406679] [drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680 [ 2.406687] [drm:intel_update_fbc], [ 2.406692] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 2.406700] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 2.406707] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 2.406715] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 2.406723] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 2.406732] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:34:1366x768] [ 2.406740] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 2.406747] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 2.406755] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 2.406762] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 2.458653] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.462810] Refined TSC clocksource calibration: 1995.467 MHz. [ 2.462816] Switching to clocksource tsc [ 2.510631] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.511451] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x700 [ 2.511455] [drm:gen6_fdi_link_train], FDI train 1 done. [ 2.512112] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 2.512116] [drm:gen6_fdi_link_train], FDI train 2 done. [ 2.512117] [drm:gen6_fdi_link_train], FDI train done. [ 2.513349] [drm:intel_update_fbc], [ 2.513351] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 2.513364] [drm:intel_panel_set_backlight], set backlight PWM = 976 [ 2.513368] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 2.513371] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on [ 2.513389] [drm:drm_crtc_helper_set_config], [ 2.513391] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 2.513401] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 2.513403] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 2.513405] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 2.513409] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 2.513413] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 2.513415] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.513418] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 2.513420] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 2.513423] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 2.513425] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 2.513431] [drm:drm_crtc_helper_set_mode], [CRTC:4] [ 2.513474] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 0 [ 2.513477] [drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI [ 2.513479] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 2.513686] [drm:ironlake_crtc_mode_set], Mode for pipe B: [ 2.513688] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 2.530116] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 2.565611] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.565619] [drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680 [ 2.565627] [drm:intel_update_fbc], [ 2.565631] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 2.565638] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 2.565645] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 2.565653] [drm:drm_crtc_helper_set_mode], [ENCODER:13:TMDS-13] set [MODE:35:1920x1200] [ 2.617594] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.617614] [drm:intel_write_eld], ELD on [CONNECTOR:14:HDMI-A-1], [ENCODER:13:TMDS-13] [ 2.617621] [drm:ironlake_write_eld], ELD on pipe B [ 2.617627] [drm:ironlake_write_eld], Audio directed to unknown port [ 2.617638] [drm:ironlake_write_eld], ELD size 9 [ 2.617657] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 2.617664] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 2.669581] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.721564] [drm:intel_wait_for_vblank], vblank wait timed out [ 2.722384] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 2.722387] [drm:gen6_fdi_link_train], FDI train 1 done. [ 2.723045] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 2.723048] [drm:gen6_fdi_link_train], FDI train 2 done. [ 2.723050] [drm:gen6_fdi_link_train], FDI train done. [ 2.723306] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 2.724282] [drm:intel_update_fbc], [ 2.724283] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 2.724297] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 2.724300] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] set DPMS on [ 2.724329] [drm:drm_crtc_helper_set_config], [ 2.724331] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 2.724341] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.724344] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 2.724347] [drm:drm_crtc_helper_set_config], [ 2.724349] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 2.724358] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.724361] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 2.727607] [drm:drm_crtc_helper_set_config], [ 2.727609] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 2.727619] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.727622] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 2.727625] [drm:drm_crtc_helper_set_config], [ 2.727626] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 2.727636] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.727638] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 2.730679] Console: switching to colour frame buffer device 170x48 [ 2.730684] [drm:drm_crtc_helper_set_config], [ 2.730685] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 2.730696] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.730698] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 2.730701] [drm:drm_crtc_helper_set_config], [ 2.730703] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 2.730712] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 2.730715] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 2.892356] fb0: inteldrmfb frame buffer device [ 2.892357] drm: registered panic notifier [ 2.911615] ACPI Error: Current brightness invalid (20110413/video-376) [ 2.913765] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3 [ 2.915313] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.916834] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 5.933697] floppy0: no floppy controllers found [ 6.068182] brd: module loaded [ 6.071670] loop: module loaded [ 6.073687] Loading iSCSI transport class v2.0-870. [ 6.076163] Loading Adaptec I2O RAID: Version 2.4 Build 5go [ 6.077480] Detecting Adaptec I2O RAID controllers... [ 6.079001] Adaptec aacraid driver 1.1-7[28000]-ms [ 6.080666] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 6.082376] QLogic Fibre Channel HBA Driver: 8.03.07.03-k [ 6.083972] iscsi: registered transport (qla4xxx) [ 6.085392] QLogic iSCSI HBA Driver [ 6.086750] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006) [ 6.088377] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006) [ 6.089967] megasas: 00.00.05.38-rc1 Wed. May. 11 17:00:00 PDT 2011 [ 6.091568] mpt2sas version 08.100.00.02 loaded [ 6.093454] ahci 0000:00:1f.2: version 3.0 [ 6.094762] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 6.096319] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 6.097725] ahci: SSS flag set, parallel bus scan disabled [ 6.109550] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x39 impl SATA mode [ 6.111173] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 6.112841] ahci 0000:00:1f.2: setting latency timer to 64 [ 6.121830] scsi0 : ahci [ 6.123394] scsi1 : ahci [ 6.124885] scsi2 : ahci [ 6.126363] scsi3 : ahci [ 6.127826] scsi4 : ahci [ 6.129271] scsi5 : ahci [ 6.130690] ata1: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608100 irq 41 [ 6.132203] ata2: DUMMY [ 6.133394] ata3: DUMMY [ 6.134567] ata4: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608280 irq 41 [ 6.136089] ata5: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608300 irq 41 [ 6.137594] ata6: SATA max UDMA/133 abar m2048@0xc0608000 port 0xc0608380 irq 41 [ 6.142563] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 6.144039] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 6.145528] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 6.146939] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 6.148440] Intel(R) Gigabit Ethernet Network Driver - version 3.0.6-k2 [ 6.149902] Copyright (c) 2007-2011 Intel Corporation. [ 6.151363] Intel(R) Virtual Function Network Driver - version 1.0.8-k0 [ 6.152837] Copyright (c) 2009 - 2010 Intel Corporation. [ 6.154318] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 3.3.8-k2 [ 6.155879] ixgbe: Copyright (c) 1999-2011 Intel Corporation. [ 6.157404] ixgb: Intel(R) PRO/10GbE Network Driver - version 1.0.135-k2-NAPI [ 6.158918] ixgb: Copyright (c) 1999-2008 Intel Corporation. [ 6.160799] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 6.162589] ns83820.c: National Semiconductor DP83820 10/100/1000 driver. [ 6.164341] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.14 (Mar 30, 2011) [ 6.166016] sky2: driver version 1.28 [ 6.168751] tun: Universal TUN/TAP device driver, 1.6 [ 6.170139] tun: (C) 1999-2004 Max Krasnyansky [ 6.171834] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.173297] r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 6.174943] r8169 0000:03:00.0: setting latency timer to 64 [ 6.176631] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 6.178975] r8169 0000:03:00.0: eth0: RTL8168e/8111e at 0xffffc90000662000, f0:de:f1:2d:5c:de, XID 0c200000 IRQ 42 [ 6.180931] usbcore: registered new interface driver catc [ 6.182378] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 6.183936] usbcore: registered new interface driver kaweth [ 6.185386] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 6.187046] usbcore: registered new interface driver pegasus [ 6.188510] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 6.190142] usbcore: registered new interface driver rtl8150 [ 6.191694] usbcore: registered new interface driver asix [ 6.193221] usbcore: registered new interface driver cdc_ether [ 6.194764] usbcore: registered new interface driver cdc_eem [ 6.196270] usbcore: registered new interface driver dm9601 [ 6.197753] usbcore: registered new interface driver smsc75xx [ 6.199223] usbcore: registered new interface driver smsc95xx [ 6.200674] usbcore: registered new interface driver gl620a [ 6.202116] usbcore: registered new interface driver net1080 [ 6.203568] usbcore: registered new interface driver plusb [ 6.205008] usbcore: registered new interface driver rndis_host [ 6.206482] usbcore: registered new interface driver cdc_subset [ 6.207973] usbcore: registered new interface driver zaurus [ 6.209408] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 6.210948] usbcore: registered new interface driver int51x1 [ 6.212292] cdc_ncm: 01-June-2011 [ 6.213542] usbcore: registered new interface driver cdc_ncm [ 6.214888] netconsole: local port 6665 [ 6.216118] netconsole: local IP 10.0.0.0 [ 6.217339] netconsole: interface 'eth0' [ 6.218540] netconsole: remote port 6666 [ 6.219732] netconsole: remote IP 10.239.97.14 [ 6.220948] netconsole: remote ethernet address 00:30:48:fe:19:94 [ 6.222271] netconsole: device eth0 not up yet, forcing it [ 6.443413] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.716392] ata1.00: ATA-8: ST9500420AS, 0003LVM1, max UDMA/100 [ 6.717763] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 6.721036] ata1.00: configured for UDMA/100 [ 6.722537] scsi 0:0:0:0: Direct-Access ATA ST9500420AS 0003 PQ: 0 ANSI: 5 [ 6.724473] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 6.726093] sd 0:0:0:0: [sda] Write Protect is off [ 6.727333] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 6.728613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.807786] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 > sda4 [ 6.810567] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.029221] ata4: SATA link down (SStatus 0 SControl 300) [ 7.335127] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.338302] ata5.00: ATAPI: Optiarc DVD RW AD-7710H, A833, max UDMA/100 [ 7.341778] ata5.00: configured for UDMA/100 [ 7.345128] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7710H A833 PQ: 0 ANSI: 5 [ 7.652023] ata6: SATA link down (SStatus 0 SControl 300) [ 12.899395] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 12.900923] [drm:intel_crt_detect], CRT not detected via hotplug [ 12.902250] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2 [ 13.046818] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 13.048224] [drm:drm_edid_to_eld], ELD monitor DELL 2709W [ 13.049526] HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2 [ 13.051126] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 13.052466] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-1] status updated from 1 to 1 [ 13.054521] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.057794] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.060790] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 13.063275] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 13.064701] [drm:output_poll_execute], [CONNECTOR:17:DP-1] status updated from 2 to 2 [ 67.026397] r8169 0000:03:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-2.fw (-2) [ 67.047182] r8169 0000:03:00.0: eth0: link down [ 67.048576] r8169 0000:03:00.0: eth0: link down [ 68.565993] r8169 0000:03:00.0: eth0: link up [ 68.581378] console [netcon0] enabled [ 68.582787] netconsole: network logging started [ 68.584303] Fusion MPT base driver 3.04.19 [ 68.585687] Copyright (c) 1999-2008 LSI Corporation [ 68.587137] Fusion MPT SPI Host driver 3.04.19 [ 68.588664] Fusion MPT FC Host driver 3.04.19 [ 68.590167] Fusion MPT SAS Host driver 3.04.19 [ 68.591678] Fusion MPT misc device (ioctl) driver 3.04.19 [ 68.593271] mptctl: Registered with Fusion MPT base driver [ 68.594748] mptctl: /dev/mptctl @ (major,minor=10,220) [ 68.596384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 68.597962] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 68.599540] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 68.601199] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 68.602730] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 68.604294] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file 'devices' [ 68.605935] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '001' [ 68.607537] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 68.609166] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 68.610194] r8169 0000:03:00.0: eth0: link down [ 68.612321] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 68.614060] ehci_hcd 0000:00:1a.0: support lpm [ 68.615522] ehci_hcd 0000:00:1a.0: debug port 2 [ 68.616954] ehci_hcd 0000:00:1a.0: reset command 0010012 (park)=0 ithresh=1 Periodic period=1024 Reset HALT [ 68.622616] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported [ 68.624199] ehci_hcd 0000:00:1a.0: supports USB remote wakeup [ 68.625747] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc060a000 [ 68.627252] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 68.632860] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 68.639619] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 68.641282] usb usb1: default language 0x0409 [ 68.642689] usb usb1: udev 1, busnum 1, minor = 0 [ 68.644086] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 68.645620] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 68.647157] usb usb1: Product: EHCI Host Controller [ 68.648555] usb usb1: Manufacturer: Linux 3.0.0-drm+ ehci_hcd [ 68.649987] usb usb1: SerialNumber: 0000:00:1a.0 [ 68.651498] usb usb1: usb_probe_device [ 68.652764] usb usb1: configuration #1 chosen from 1 choice [ 68.654154] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 68.655690] hub 1-0:1.0: usb_probe_interface [ 68.656998] hub 1-0:1.0: usb_probe_interface - got id [ 68.658344] hub 1-0:1.0: USB hub found [ 68.659590] hub 1-0:1.0: 2 ports detected [ 68.660820] hub 1-0:1.0: standalone hub [ 68.662035] hub 1-0:1.0: no power switching (usb 1.0) [ 68.663335] hub 1-0:1.0: individual port over-current protection [ 68.664705] hub 1-0:1.0: power on to power good time: 20ms [ 68.666076] hub 1-0:1.0: local power source is good [ 68.667377] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 68.668870] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '001' [ 68.670425] IOAPIC[0]: Set routing entry (2-23 -> 0x69 -> IRQ 23 Mode:1 Active:1) [ 68.671944] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 68.673457] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 68.674874] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 68.676248] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '002' [ 68.677749] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 68.679284] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 68.680933] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 68.682532] ehci_hcd 0000:00:1d.0: support lpm [ 68.683896] ehci_hcd 0000:00:1d.0: debug port 2 [ 68.685236] ehci_hcd 0000:00:1d.0: reset command 0010012 (park)=0 ithresh=1 Periodic period=1024 Reset HALT [ 68.690830] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported [ 68.692323] ehci_hcd 0000:00:1d.0: supports USB remote wakeup [ 68.693805] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc0609000 [ 68.695240] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 68.700740] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 68.707595] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 68.709123] usb usb2: default language 0x0409 [ 68.710458] usb usb2: udev 1, busnum 2, minor = 128 [ 68.711806] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 68.713280] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 68.714767] usb usb2: Product: EHCI Host Controller [ 68.716110] usb usb2: Manufacturer: Linux 3.0.0-drm+ ehci_hcd [ 68.717506] usb usb2: SerialNumber: 0000:00:1d.0 [ 68.719014] usb usb2: usb_probe_device [ 68.720259] usb usb2: configuration #1 chosen from 1 choice [ 68.721637] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 68.723124] hub 2-0:1.0: usb_probe_interface [ 68.724403] hub 2-0:1.0: usb_probe_interface - got id [ 68.725710] hub 2-0:1.0: USB hub found [ 68.726944] hub 2-0:1.0: 2 ports detected [ 68.728174] hub 2-0:1.0: standalone hub [ 68.729368] hub 2-0:1.0: no power switching (usb 1.0) [ 68.730643] hub 2-0:1.0: individual port over-current protection [ 68.731994] hub 2-0:1.0: power on to power good time: 20ms [ 68.733321] hub 2-0:1.0: local power source is good [ 68.734589] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 68.736044] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '001' [ 68.737637] uhci_hcd: USB Universal Host Controller Interface driver [ 68.739195] Initializing USB Mass Storage driver... [ 68.740621] usbcore: registered new interface driver usb-storage [ 68.742036] USB Mass Storage support registered. [ 68.743491] usbcore: registered new interface driver libusual [ 68.744990] usbcore: registered new interface driver ums-alauda [ 68.746500] usbcore: registered new interface driver ums-cypress [ 68.748001] usbcore: registered new interface driver ums-datafab [ 68.749477] usbcore: registered new interface driver ums-freecom [ 68.750947] usbcore: registered new interface driver ums-isd200 [ 68.752381] usbcore: registered new interface driver ums-jumpshot [ 68.753816] usbcore: registered new interface driver ums-karma [ 68.755205] usbcore: registered new interface driver ums-onetouch [ 68.756616] usbcore: registered new interface driver ums-sddr09 [ 68.757984] usbcore: registered new interface driver ums-sddr55 [ 68.759339] usbcore: registered new interface driver ums-usbat [ 68.760755] usbcore: registered new interface driver usbserial [ 68.762073] USB Serial support registered for generic [ 68.763329] usbcore: registered new interface driver usbserial_generic [ 68.764605] usbserial: USB Serial Driver core [ 68.765803] USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 68.767295] usbcore: registered new interface driver belkin [ 68.768515] belkin_sa: v1.3:USB Belkin Serial converter driver [ 68.769805] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 68.771258] hub 1-0:1.0: port 1: status 0501 change 0001 [ 68.771378] USB Serial support registered for MCT U232 [ 68.771505] usbcore: registered new interface driver mct_u232 [ 68.771508] mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver [ 68.771805] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 68.774390] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 68.774424] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 68.774967] mousedev: PS/2 mouse device common for all mice [ 68.776120] rtc_cmos 00:06: RTC can wake from S4 [ 68.776441] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 68.776508] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 68.776605] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 68.776854] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 68.777023] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 68.777028] iTCO_vendor_support: vendor-support=0 [ 68.777031] SoftDog: cannot register miscdev on minor=130 (err=-16) [ 68.777043] md: linear personality registered for level -1 [ 68.777046] md: raid0 personality registered for level 0 [ 68.777048] md: raid1 personality registered for level 1 [ 68.777050] md: raid10 personality registered for level 10 [ 68.777052] md: raid6 personality registered for level 6 [ 68.777054] md: raid5 personality registered for level 5 [ 68.777056] md: raid4 personality registered for level 4 [ 68.777058] md: multipath personality registered for level -4 [ 68.777060] md: faulty personality registered for level -5 [ 68.777483] device-mapper: uevent: version 1.0.3 [ 68.777823] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com [ 68.778043] device-mapper: multipath: version 1.3.0 loaded [ 68.778058] device-mapper: multipath round-robin: version 1.0.0 loaded [ 68.778060] device-mapper: multipath queue-length: version 0.1.0 loaded [ 68.778062] device-mapper: multipath service-time: version 0.2.0 loaded [ 68.778317] device-mapper: dm-log-userspace: version 1.1.0 loaded [ 68.780859] cpuidle: using governor ladder [ 68.819573] cpuidle: using governor menu [ 68.821105] usbcore: registered new interface driver usbhid [ 68.822432] usbhid: USB HID core driver [ 68.824225] dell_wmi: No known WMI GUID found [ 68.825505] acer_wmi: Acer Laptop ACPI-WMI Extras [ 68.827288] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 68.835581] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 68.837253] hub 2-0:1.0: port 1: status 0501 change 0001 [ 68.860030] IOAPIC[0]: Set routing entry (2-22 -> 0x71 -> IRQ 22 Mode:1 Active:1) [ 68.861600] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 68.863263] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 68.864714] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 68.866159] ALSA hda_intel.c:2586 chipset global capabilities = 0x4401 [ 68.867640] ALSA hda_intel.c:1089 Clearing TCSEL [ 68.868999] ALSA hda_intel.c:1127 HDA snoop disabled, enabling ... OK [ 68.877584] ALSA hda_intel.c:943 codec_mask = 0x9 [ 68.879216] ALSA hda_intel.c:1390 codec #0 probed OK [ 68.880607] ALSA hda_intel.c:1390 codec #3 probed OK [ 68.913621] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 68.914994] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 68.966779] ehci_hcd 0000:00:1a.0: port 1 high speed [ 68.968103] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 69.020587] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 69.072746] ehci_hcd 0000:00:1a.0: port 1 high speed [ 69.074066] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 69.138709] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 [ 69.140346] ehci_hcd 0000:00:1a.0: LPM: no device attached [ 69.142014] usb 1-1: udev 2, busnum 1, minor = 1 [ 69.143337] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 69.145147] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 69.146866] usb 1-1: usb_probe_device [ 69.148101] usb 1-1: configuration #1 chosen from 1 choice [ 69.149942] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 69.151620] hub 1-1:1.0: usb_probe_interface [ 69.152881] hub 1-1:1.0: usb_probe_interface - got id [ 69.154386] hub 1-1:1.0: USB hub found [ 69.155885] hub 1-1:1.0: 6 ports detected [ 69.157204] hub 1-1:1.0: standalone hub [ 69.158755] hub 1-1:1.0: individual port power switching [ 69.160095] hub 1-1:1.0: individual port over-current protection [ 69.161721] hub 1-1:1.0: Single TT [ 69.162928] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 69.164539] hub 1-1:1.0: power on to power good time: 100ms [ 69.166125] hub 1-1:1.0: local power source is good [ 69.167769] hub 1-1:1.0: enabling power on all ports [ 69.169879] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '002' [ 69.171363] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 69.173105] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 69.225694] ehci_hcd 0000:00:1d.0: port 1 high speed [ 69.227151] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 69.270227] hub 1-1:1.0: port 5: status 0101 change 0001 [ 69.279488] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 69.332659] ehci_hcd 0000:00:1d.0: port 1 high speed [ 69.334161] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 69.371432] usb 1-1: link qh256-0001/ffff88014363e500 start 1 [1/0 us] [ 69.389450] ALSA patch_realtek.c:1748 SKU: Nid=0x1d sku_cfg=0x40179a2d [ 69.390996] ALSA patch_realtek.c:1750 SKU: port_connectivity=0x1 [ 69.392410] ALSA patch_realtek.c:1751 SKU: enable_pcbeep=0x1 [ 69.393781] ALSA patch_realtek.c:1752 SKU: check_sum=0x00000007 [ 69.395176] ALSA patch_realtek.c:1753 SKU: customization=0x0000009a [ 69.396578] ALSA patch_realtek.c:1754 SKU: external_amp=0x5 [ 69.397921] ALSA patch_realtek.c:1755 SKU: platform_type=0x1 [ 69.398545] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 [ 69.398551] ehci_hcd 0000:00:1d.0: LPM: no device attached [ 69.398790] usb 2-1: udev 2, busnum 2, minor = 129 [ 69.398794] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 69.398797] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 69.399136] usb 2-1: usb_probe_device [ 69.399139] usb 2-1: configuration #1 chosen from 1 choice [ 69.399314] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 69.399574] hub 2-1:1.0: usb_probe_interface [ 69.399577] hub 2-1:1.0: usb_probe_interface - got id [ 69.399579] hub 2-1:1.0: USB hub found [ 69.399661] hub 2-1:1.0: 6 ports detected [ 69.399664] hub 2-1:1.0: standalone hub [ 69.399666] hub 2-1:1.0: individual port power switching [ 69.399669] hub 2-1:1.0: individual port over-current protection [ 69.399672] hub 2-1:1.0: Single TT [ 69.399674] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 69.399678] hub 2-1:1.0: power on to power good time: 100ms [ 69.399908] hub 2-1:1.0: local power source is good [ 69.399912] hub 2-1:1.0: enabling power on all ports [ 69.400708] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '002' [ 69.400762] hub 1-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 69.400918] hub 1-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 69.411542] hub 1-1:1.0: port 5 not reset yet, waiting 10ms [ 69.429825] ALSA patch_realtek.c:1756 SKU: swap=0x0 [ 69.431110] ALSA patch_realtek.c:1757 SKU: override=0x1 [ 69.432577] hda_codec: ALC272: BIOS auto-probing. [ 69.433827] ALSA hda_codec.c:4707 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker [ 69.435336] ALSA hda_codec.c:4711 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 69.436737] ALSA hda_codec.c:4715 hp_outs=1 (0x21/0x0/0x0/0x0/0x0) [ 69.438115] ALSA hda_codec.c:4716 mono: mono_out=0x0 [ 69.439405] ALSA hda_codec.c:4720 inputs: [ 69.439690] ALSA hda_codec.c:4724 Internal Mic=0x12 [ 69.440961] ALSA hda_codec.c:4724 Mic=0x18 [ 69.442159] ALSA hda_codec.c:4726 [ 69.445272] ALSA patch_realtek.c:1805 realtek: No valid SSID, checking pincfg 0x40179a2d for NID 0x1d [ 69.446793] ALSA patch_realtek.c:1821 realtek: Enabling init ASM_ID=0x9a2d CODEC_ID=10ec0272 [ 69.448284] ALSA patch_realtek.c:1598 realtek: Enable HP auto-muting on NID 0x21 [ 69.449669] ALSA patch_realtek.c:1678 realtek: Enable auto-mic switch on NID 0x18/0x12/0x0 [ 69.451313] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 69.453468] HDMI status: Pin=5 Presence_Detect=1 ELD_Valid=1 [ 69.459200] ALSA hda_eld.c:267 HDMI: Unknown ELD version 0 [ 69.460969] ALSA patch_hdmi.c:945 HDMI: Skipping node 3 (no connection) [ 69.462282] ALSA patch_hdmi.c:945 HDMI: Skipping node 4 (no connection) [ 69.465656] ALSA hda_codec.c:2234 Cannot find slave Front Playback Volume, skipped [ 69.467050] ALSA hda_codec.c:2234 Cannot find slave Surround Playback Volume, skipped [ 69.468472] ALSA hda_codec.c:2234 Cannot find slave Center Playback Volume, skipped [ 69.469862] ALSA hda_codec.c:2234 Cannot find slave LFE Playback Volume, skipped [ 69.471254] ALSA hda_codec.c:2234 Cannot find slave Side Playback Volume, skipped [ 69.471259] ALSA hda_codec.c:2234 Cannot find slave Mono Playback Volume, skipped [ 69.471262] ALSA hda_codec.c:2234 Cannot find slave Line-Out Playback Volume, skipped [ 69.471268] ALSA hda_codec.c:2234 Cannot find slave Front Playback Switch, skipped [ 69.471271] ALSA hda_codec.c:2234 Cannot find slave Surround Playback Switch, skipped [ 69.471274] ALSA hda_codec.c:2234 Cannot find slave Center Playback Switch, skipped [ 69.471276] ALSA hda_codec.c:2234 Cannot find slave LFE Playback Switch, skipped [ 69.471279] ALSA hda_codec.c:2234 Cannot find slave Side Playback Switch, skipped [ 69.471288] ALSA hda_codec.c:2234 Cannot find slave Mono Playback Switch, skipped [ 69.471291] ALSA hda_codec.c:2234 Cannot find slave IEC958 Playback Switch, skipped [ 69.471295] ALSA hda_codec.c:2234 Cannot find slave Line-Out Playback Switch, skipped [ 69.471491] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1 [ 69.471540] HDMI status: Pin=5 Presence_Detect=1 ELD_Valid=1 [ 69.472304] input: HDA Intel PCH HDMI/DP as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 69.472715] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 69.473067] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 69.473527] usb 1-1.5: new high speed USB device number 3 using ehci_hcd [ 69.474041] ALSA device list: [ 69.474044] #0: HDA Intel PCH at 0xc0600000 irq 43 [ 69.474048] oprofile: using NMI interrupt. [ 69.474186] netem: version 1.3 [ 69.474189] Netfilter messages via NETLINK v0.30. [ 69.474279] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 69.475129] ALSA hda_eld.c:267 HDMI: Unknown ELD version 0 [ 69.475194] HDMI hot plug event: Pin=5 Presence_Detect=1 ELD_Valid=1 [ 69.475253] HDMI status: Pin=5 Presence_Detect=1 ELD_Valid=1 [ 69.475798] ctnetlink v0.93: registering with nfnetlink. [ 69.475865] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 69.475868] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 69.476494] xt_time: kernel timezone is -0000 [ 69.478791] ALSA hda_eld.c:267 HDMI: Unknown ELD version 0 [ 69.479422] ip_tables: (C) 2000-2006 Netfilter Core Team [ 69.479511] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 69.479540] arp_tables: (C) 2002 David S. Miller [ 69.479580] TCP bic registered [ 69.479582] TCP cubic registered [ 69.479584] TCP westwood registered [ 69.479585] TCP highspeed registered [ 69.479587] TCP hybla registered [ 69.479588] TCP htcp registered [ 69.479590] TCP vegas registered [ 69.479592] TCP veno registered [ 69.479593] TCP scalable registered [ 69.479595] TCP lp registered [ 69.479596] TCP yeah registered [ 69.479598] TCP illinois registered [ 69.479600] Initializing XFRM netlink socket [ 69.479618] NET: Registered protocol family 17 [ 69.479632] NET: Registered protocol family 15 [ 69.479789] Bridge firewalling registered [ 69.479805] Ebtables v2.0 registered [ 69.480363] PM: Hibernation image not present or could not be loaded. [ 69.480396] registered taskstats version 1 [ 69.481160] Magic number: 7:513:623 [ 69.485518] hub 1-1:1.0: port 5 not reset yet, waiting 10ms [ 69.500633] hub 2-1:1.0: port 2: status 0101 change 0001 [ 69.500875] hub 2-1:1.0: port 3: status 0101 change 0001 [ 69.501125] hub 2-1:1.0: port 4: status 0101 change 0001 [ 69.501500] hub 2-1:1.0: port 6: status 0101 change 0001 [ 69.502926] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input9 [ 69.538499] rtc_cmos 00:06: setting system clock to 2011-08-01 08:38:04 UTC (1312187884) [ 69.601406] usb 2-1: link qh256-0001/ffff88014361d700 start 1 [1/0 us] [ 69.690053] usb 1-1.5: skipped 1 descriptor after configuration [ 69.692649] usb 1-1.5: skipped 5 descriptors after interface [ 69.695187] usb 1-1.5: skipped 1 descriptor after endpoint [ 69.697664] usb 1-1.5: skipped 19 descriptors after interface [ 69.700351] usb 1-1.5: default language 0x0409 [ 69.726525] usb 1-1.5: udev 3, busnum 1, minor = 2 [ 69.728941] usb 1-1.5: New USB device found, idVendor=0bda, idProduct=58ea [ 69.731524] usb 1-1.5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 69.734107] usb 1-1.5: Product: Lenovo easy camera [ 69.736550] usb 1-1.5: Manufacturer: Generic [ 69.738868] usb 1-1.5: SerialNumber: 200901010001 [ 69.741811] usb 1-1.5: usb_probe_device [ 69.744052] usb 1-1.5: configuration #1 chosen from 1 choice [ 69.747354] usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0) [ 69.750639] usbserial_generic 1-1.5:1.0: usb_probe_interface [ 69.752973] usbserial_generic 1-1.5:1.0: usb_probe_interface - got id [ 69.755537] usb 1-1.5: adding 1-1.5:1.1 (config #1, interface 1) [ 69.758354] usbserial_generic 1-1.5:1.1: usb_probe_interface [ 69.760665] usbserial_generic 1-1.5:1.1: usb_probe_interface - got id [ 69.762999] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '003' [ 69.765509] hub 2-1:1.0: state 7 ports 6 chg 005c evt 0000 [ 69.766598] hub 2-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 69.778481] hub 2-1:1.0: port 2 not reset yet, waiting 10ms [ 69.842458] usb 2-1.2: new high speed USB device number 3 using ehci_hcd [ 69.856449] hub 2-1:1.0: port 2 not reset yet, waiting 10ms [ 69.933454] usb 2-1.2: default language 0x0409 [ 69.937582] usb 2-1.2: udev 3, busnum 2, minor = 130 [ 69.940070] usb 2-1.2: New USB device found, idVendor=03f0, idProduct=5607 [ 69.942715] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 69.945437] usb 2-1.2: Product: v210w [ 69.947942] usb 2-1.2: Manufacturer: HP [ 69.950415] usb 2-1.2: SerialNumber: 0000000000000031 [ 69.953622] usb 2-1.2: usb_probe_device [ 69.956110] usb 2-1.2: configuration #1 chosen from 1 choice [ 69.959026] usb 2-1.2: adding 2-1.2:1.0 (config #1, interface 0) [ 69.962149] usb-storage 2-1.2:1.0: usb_probe_interface [ 69.964817] usb-storage 2-1.2:1.0: usb_probe_interface - got id [ 69.967971] scsi6 : usb-storage 2-1.2:1.0 [ 69.971509] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '003' [ 69.974505] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s [ 70.039555] usb 2-1.3: new full speed USB device number 4 using ehci_hcd [ 70.053417] hub 2-1:1.0: port 3 not reset yet, waiting 10ms [ 70.131885] usb 2-1.3: default language 0x0409 [ 70.135391] usb 2-1.3: udev 4, busnum 2, minor = 131 [ 70.138203] usb 2-1.3: New USB device found, idVendor=1c7a, idProduct=0603 [ 70.141062] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 70.144001] usb 2-1.3: Product: EgisTec_ES603 [ 70.146643] usb 2-1.3: Manufacturer: EgisTec [ 70.149831] usb 2-1.3: usb_probe_device [ 70.152379] usb 2-1.3: configuration #1 chosen from 1 choice [ 70.155369] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0) [ 70.158657] usbserial_generic 2-1.3:1.0: usb_probe_interface [ 70.161407] usbserial_generic 2-1.3:1.0: usb_probe_interface - got id [ 70.164359] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '004' [ 70.167406] hub 2-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 70.169828] r8169 0000:03:00.0: eth0: link up [ 70.179323] hub 2-1:1.0: port 4 not reset yet, waiting 10ms [ 70.182752] IP-Config: Complete: [ 70.185352] device=eth0, addr=10.239.47.20, mask=255.255.255.0, gw=10.239.47.241, [ 70.186086] host=wu-kexec, domain=, nis-domain=(none), [ 70.188977] bootserver=10.239.97.14, rootserver=10.239.97.14, rootpath= [ 70.195164] md: Waiting for all devices to be available before autodetect [ 70.196358] md: If you don't use raid, use raid=noautodetect [ 70.198410] md: Autodetecting RAID arrays. [ 70.199463] md: Scanned 0 and added 0 devices. [ 70.200474] md: autorun ... [ 70.201394] md: ... autorun DONE. [ 70.244351] usb 2-1.4: new full speed USB device number 5 using ehci_hcd [ 70.258294] hub 2-1:1.0: port 4 not reset yet, waiting 10ms [ 70.338092] usb 2-1.4: skipped 1 descriptor after interface [ 70.341322] usb 2-1.4: default language 0x0409 [ 70.345324] usb 2-1.4: udev 5, busnum 2, minor = 132 [ 70.348130] usb 2-1.4: New USB device found, idVendor=0489, idProduct=e00d [ 70.351067] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 70.354038] usb 2-1.4: Product: Broadcom Bluetooth 2.1 Device [ 70.356885] usb 2-1.4: Manufacturer: Broadcom Corp [ 70.359663] usb 2-1.4: SerialNumber: 18F46AE6E7A9 [ 70.362982] usb 2-1.4: usb_probe_device [ 70.365713] usb 2-1.4: configuration #1 chosen from 1 choice [ 70.368788] usb 2-1.4: adding 2-1.4:1.0 (config #1, interface 0) [ 70.370210] usbserial_generic 2-1.4:1.0: usb_probe_interface [ 70.371356] usbserial_generic 2-1.4:1.0: usb_probe_interface - got id [ 70.372492] usb 2-1.4: adding 2-1.4:1.1 (config #1, interface 1) [ 70.373895] usbserial_generic 2-1.4:1.1: usb_probe_interface [ 70.375089] usbserial_generic 2-1.4:1.1: usb_probe_interface - got id [ 70.376237] usb 2-1.4: adding 2-1.4:1.2 (config #1, interface 2) [ 70.377661] usbserial_generic 2-1.4:1.2: usb_probe_interface [ 70.378819] usbserial_generic 2-1.4:1.2: usb_probe_interface - got id [ 70.379940] usb 2-1.4: adding 2-1.4:1.3 (config #1, interface 3) [ 70.381475] usbserial_generic 2-1.4:1.3: usb_probe_interface [ 70.382552] usbserial_generic 2-1.4:1.3: usb_probe_interface - got id [ 70.383626] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '005' [ 70.384870] hub 2-1:1.0: port 6, status 0101, change 0000, 12 Mb/s [ 70.397254] hub 2-1:1.0: port 6 not reset yet, waiting 10ms [ 70.461237] usb 2-1.6: new high speed USB device number 6 using ehci_hcd [ 70.475234] hub 2-1:1.0: port 6 not reset yet, waiting 10ms [ 70.552809] usb 2-1.6: default language 0x0409 [ 70.555930] usb 2-1.6: udev 6, busnum 2, minor = 133 [ 70.558668] usb 2-1.6: New USB device found, idVendor=0bda, idProduct=0139 [ 70.561564] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 70.564518] usb 2-1.6: Product: USB2.0-CRW [ 70.567227] usb 2-1.6: Manufacturer: Generic [ 70.569906] usb 2-1.6: SerialNumber: 20100201396000000 [ 70.573221] usb 2-1.6: usb_probe_device [ 70.574258] usb 2-1.6: configuration #1 chosen from 1 choice [ 70.575676] usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0) [ 70.577320] usbserial_generic 2-1.6:1.0: usb_probe_interface [ 70.578367] usbserial_generic 2-1.6:1.0: usb_probe_interface - got id [ 70.579470] /c/wfg/linux-drm/drivers/usb/core/inode.c: creating file '006' [ 70.580554] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0040 [ 70.972630] scsi 6:0:0:0: Direct-Access hp v210w 0.00 PQ: 0 ANSI: 2 [ 71.086225] scsi_scan_6 used greatest stack depth: 4792 bytes left [ 71.089183] sd 6:0:0:0: [sdb] 31711232 512-byte logical blocks: (16.2 GB/15.1 GiB) [ 71.092678] sd 6:0:0:0: [sdb] Write Protect is off [ 71.095419] sd 6:0:0:0: [sdb] Mode Sense: 00 00 00 00 [ 71.098797] sd 6:0:0:0: [sdb] Asking for cache data failed [ 71.101521] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 71.107940] sd 6:0:0:0: [sdb] Asking for cache data failed [ 71.110664] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 71.114416] sdb: sdb1 [ 71.120540] sd 6:0:0:0: [sdb] Asking for cache data failed [ 71.123337] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 71.126108] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 71.225054] VFS: Mounted root (nfs filesystem) on device 0:15. [ 71.227906] debug: unmapping init memory ffffffff81e99000..ffffffff82145000 [ 71.767520] stty used greatest stack depth: 4384 bytes left [ 71.861633] uname used greatest stack depth: 3728 bytes left [ 71.970015] sh used greatest stack depth: 3680 bytes left [ 72.833624] alsa-utils used greatest stack depth: 3664 bytes left [ 72.908760] blkid used greatest stack depth: 3552 bytes left [ 73.292806] alsactl used greatest stack depth: 3536 bytes left [ 74.327135] fstab_import used greatest stack depth: 3360 bytes left [ 85.767257] rc used greatest stack depth: 3344 bytes left [ 113.236378] [drm:pch_irq_handler], PCH transcoder audio interrupt [ 113.239286] [drm:i915_hotplug_work_func], running encoder hotplug functions [ 113.242681] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 113.245851] [drm:intel_crt_detect], CRT not detected via hotplug [ 113.248908] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2 [ 113.265365] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-1] status updated from 1 to 2 [ 113.269091] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 113.273934] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 113.276937] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 113.279432] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 113.280507] [drm:output_poll_execute], [CONNECTOR:17:DP-1] status updated from 2 to 2 [ 113.281775] [drm:drm_fb_helper_hotplug_event], [ 113.282832] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 113.284033] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 113.285350] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 113.286844] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 113.287992] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 113.289248] [drm:intel_crt_detect], CRT not detected via hotplug [ 113.290350] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 113.291609] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 113.305914] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] disconnected [ 113.307124] [drm:drm_mode_debug_printmodeline], Modeline 20:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 113.308569] [drm:drm_mode_prune_invalid], Not using 1920x1200 mode -3 [ 113.309711] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 113.311181] [drm:drm_mode_prune_invalid], Not using 1920x1080 mode -3 [ 113.312336] [drm:drm_mode_debug_printmodeline], Modeline 23:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 113.313840] [drm:drm_mode_prune_invalid], Not using 1600x1200 mode -3 [ 113.314979] [drm:drm_mode_debug_printmodeline], Modeline 25:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 113.316467] [drm:drm_mode_prune_invalid], Not using 1680x1050 mode -3 [ 113.317670] [drm:drm_mode_debug_printmodeline], Modeline 30:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 113.319171] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3 [ 113.320404] [drm:drm_mode_debug_printmodeline], Modeline 22:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 113.321952] [drm:drm_mode_prune_invalid], Not using 1280x1024 mode -3 [ 113.323219] [drm:drm_mode_debug_printmodeline], Modeline 24:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 113.324812] [drm:drm_mode_prune_invalid], Not using 1152x864 mode -3 [ 113.326117] [drm:drm_mode_debug_printmodeline], Modeline 31:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 113.327725] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3 [ 113.329070] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 113.330751] [drm:drm_mode_prune_invalid], Not using 1024x768 mode -3 [ 113.332090] [drm:drm_mode_debug_printmodeline], Modeline 33:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 113.333740] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3 [ 113.335142] [drm:drm_mode_debug_printmodeline], Modeline 26:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 113.336838] [drm:drm_mode_prune_invalid], Not using 800x600 mode -3 [ 113.338278] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 113.340029] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3 [ 113.341512] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 113.343270] [drm:drm_mode_prune_invalid], Not using 640x480 mode -3 [ 113.344826] [drm:drm_mode_debug_printmodeline], Modeline 29:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 113.346599] [drm:drm_mode_prune_invalid], Not using 720x400 mode -3 [ 113.348127] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] [ 113.350231] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 113.353922] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 113.357911] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 113.361411] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 113.362886] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected [ 113.364520] [drm:drm_setup_crtcs], [ 113.365870] [drm:drm_enable_connectors], connector 5 enabled? yes [ 113.367389] [drm:drm_enable_connectors], connector 11 enabled? no [ 113.368887] [drm:drm_enable_connectors], connector 14 enabled? no [ 113.370374] [drm:drm_enable_connectors], connector 17 enabled? no [ 113.371839] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 113.373386] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 113.374932] [drm:drm_target_preferred], found mode 1366x768 [ 113.376339] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 113.377839] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 113.379308] [drm:drm_crtc_helper_set_config], [ 113.380702] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 113.382303] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 113.383896] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 113.385439] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [NOCRTC] [ 113.386976] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 113.388493] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 113.390217] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 113.396396] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 113.443405] [drm:intel_wait_for_vblank], vblank wait timed out [ 113.480815] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 113.484785] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 113.488802] [drm:intel_update_fbc], [ 113.492322] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 113.496190] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [ 113.500171] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 113.504096] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 6 (max display bpc 6) [ 113.508173] [drm:ironlake_crtc_mode_set], Mode for pipe A: [ 113.511791] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 113.567366] [drm:intel_wait_for_vblank], vblank wait timed out [ 113.570884] [drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680 [ 113.574604] [drm:intel_update_fbc], [ 113.577905] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 113.633352] [drm:intel_wait_for_vblank], vblank wait timed out [ 113.636747] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 113.640395] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 113.643938] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768] [ 113.647558] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 113.650960] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 113.706321] [drm:intel_wait_for_vblank], vblank wait timed out [ 113.761328] [drm:intel_wait_for_vblank], vblank wait timed out [ 113.765235] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 113.768408] [drm:gen6_fdi_link_train], FDI train 1 done. [ 113.772027] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 113.775111] [drm:gen6_fdi_link_train], FDI train 2 done. [ 113.778207] [drm:gen6_fdi_link_train], FDI train done. [ 113.782497] [drm:intel_update_fbc], [ 113.785266] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 113.788455] [drm:intel_panel_set_backlight], set backlight PWM = 976 [ 113.791514] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 113.794705] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on [ 113.797913] [drm:ironlake_crtc_dpms], crtc 1/1 dpms off [ 113.801097] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 113.804261] [drm:i915_get_vblank_timestamp], crtc 1 is disabled [ 113.820018] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 113.859274] [drm:intel_wait_for_vblank], vblank wait timed out [ 113.888685] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 113.892087] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 113.895618] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 113.899059] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 113.902469] [drm:intel_update_fbc], [ 113.905488] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 113.908939] [drm:drm_crtc_helper_set_config], [ 113.912114] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=0 (x y) (0 0) [ 113.915585] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 113.918859] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 123.296345] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 123.299742] [drm:intel_crt_detect], CRT not detected via hotplug [ 123.303328] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2 [ 123.451860] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 123.455327] [drm:drm_edid_to_eld], ELD monitor DELL 2709W [ 123.458568] HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2 [ 123.458578] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 123.458589] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-1] status updated from 2 to 1 [ 123.459118] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 123.460707] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 123.462738] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 123.464220] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 123.464232] [drm:output_poll_execute], [CONNECTOR:17:DP-1] status updated from 2 to 2 [ 123.464299] [drm:drm_fb_helper_hotplug_event], [ 123.464309] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] [ 123.464353] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:5:LVDS-1] probed modes : [ 123.464364] [drm:drm_mode_debug_printmodeline], Modeline 19:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 123.464380] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] [ 123.464391] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 123.464401] [drm:intel_crt_detect], CRT not detected via hotplug [ 123.464409] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:11:VGA-1] disconnected [ 123.464420] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] [ 123.610041] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 123.611393] [drm:drm_edid_to_eld], ELD monitor DELL 2709W [ 123.612630] HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2 [ 123.614128] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 123.758084] [drm:drm_edid_to_eld], ELD monitor DELL 2709W [ 123.759313] HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2 [ 123.760850] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 123.762167] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:14:HDMI-A-1] probed modes : [ 123.763674] [drm:drm_mode_debug_printmodeline], Modeline 21:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 123.765361] [drm:drm_mode_debug_printmodeline], Modeline 22:"1920x1080" 60 148500 1920 2008 2052 2200 1080 1084 1089 1125 0x40 0x5 [ 123.767045] [drm:drm_mode_debug_printmodeline], Modeline 24:"1600x1200" 60 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5 [ 123.768777] [drm:drm_mode_debug_printmodeline], Modeline 26:"1680x1050" 60 146250 1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6 [ 123.770466] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 123.772155] [drm:drm_mode_debug_printmodeline], Modeline 23:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 123.773838] [drm:drm_mode_debug_printmodeline], Modeline 25:"1152x864" 75 108000 1152 1216 1344 1600 864 865 868 900 0x40 0x5 [ 123.775552] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 123.777181] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 123.778842] [drm:drm_mode_debug_printmodeline], Modeline 34:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 123.780550] [drm:drm_mode_debug_printmodeline], Modeline 27:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 123.782176] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 123.783817] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 123.785511] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 123.787136] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] [ 123.789114] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 123.792595] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 123.795602] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 123.798103] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 123.799427] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:DP-1] disconnected [ 123.800916] [drm:drm_setup_crtcs], [ 123.802157] [drm:drm_enable_connectors], connector 5 enabled? yes [ 123.803517] [drm:drm_enable_connectors], connector 11 enabled? no [ 123.804844] [drm:drm_enable_connectors], connector 14 enabled? yes [ 123.806225] [drm:drm_enable_connectors], connector 17 enabled? no [ 123.807513] [drm:drm_target_preferred], looking for cmdline mode on connector 5 [ 123.808870] [drm:drm_target_preferred], looking for preferred mode on connector 5 [ 123.810299] [drm:drm_target_preferred], found mode 1366x768 [ 123.811545] [drm:drm_target_preferred], looking for cmdline mode on connector 14 [ 123.812929] [drm:drm_target_preferred], looking for preferred mode on connector 14 [ 123.814387] [drm:drm_target_preferred], found mode 1920x1200 [ 123.815638] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 123.816944] [drm:drm_setup_crtcs], desired mode 1366x768 set on crtc 3 [ 123.818346] [drm:drm_setup_crtcs], desired mode 1920x1200 set on crtc 4 [ 123.819643] [drm:drm_crtc_helper_set_config], [ 123.820777] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 123.822237] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 123.823543] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 123.824844] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 123.826244] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 123.827781] [drm:drm_crtc_helper_set_mode], [CRTC:3] [ 123.838482] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 123.879104] [drm:intel_wait_for_vblank], vblank wait timed out [ 123.906500] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 123.909938] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 123.913490] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 123.916814] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 123.920342] [drm:intel_update_fbc], [ 123.923202] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 123.926518] [drm:ironlake_crtc_mode_set], using SSC reference clock of 120 MHz [ 123.929849] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to LVDS (6) [ 123.933207] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 6 (max display bpc 6) [ 123.936715] [drm:ironlake_crtc_mode_set], Mode for pipe A: [ 123.939976] [drm:drm_mode_debug_printmodeline], Modeline 8:"1366x768" 60 71000 1366 1414 1446 1502 768 771 776 788 0x48 0xa [ 123.996051] [drm:intel_wait_for_vblank], vblank wait timed out [ 123.999230] [drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680 [ 124.002608] [drm:intel_update_fbc], [ 124.005667] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 124.061030] [drm:intel_wait_for_vblank], vblank wait timed out [ 124.064240] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 124.067714] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 124.071238] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 124.074636] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 124.078032] [drm:drm_crtc_helper_set_mode], [ENCODER:6:LVDS-6] set [MODE:8:1366x768] [ 124.081305] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 124.084992] [drm:ironlake_check_srwm], watermark 1: display plane 9, fbc lines 3, cursor 6 [ 124.088431] [drm:ironlake_check_srwm], watermark 2: display plane 11, fbc lines 3, cursor 6 [ 124.091902] [drm:ironlake_check_srwm], watermark 3: display plane 51, fbc lines 3, cursor 6 [ 124.147002] [drm:intel_wait_for_vblank], vblank wait timed out [ 124.201991] [drm:intel_wait_for_vblank], vblank wait timed out [ 124.205982] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 124.209131] [drm:gen6_fdi_link_train], FDI train 1 done. [ 124.213000] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 124.216102] [drm:gen6_fdi_link_train], FDI train 2 done. [ 124.219265] [drm:gen6_fdi_link_train], FDI train done. [ 124.223601] [drm:intel_update_fbc], [ 124.226629] [drm:intel_update_fbc], framebuffer not tiled or fenced, disabling compression [ 124.230398] [drm:intel_panel_set_backlight], set backlight PWM = 976 [ 124.233727] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 124.237124] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] set DPMS on [ 124.240479] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 124.243881] [drm:drm_crtc_helper_set_config], [ 124.247096] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 124.250483] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 124.253817] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 124.257200] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 124.257208] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 124.257214] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 124.257221] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 124.257228] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 124.257251] [drm:drm_crtc_helper_set_mode], [CRTC:4] [ 124.257336] [drm:intel_choose_pipe_bpp_dither], clamping display bpc (was -1) to EDID reported max of 0 [ 124.257345] [drm:intel_choose_pipe_bpp_dither], forcing bpc to 8 for HDMI [ 124.257352] [drm:intel_choose_pipe_bpp_dither], setting pipe bpc to 8 (max display bpc 8) [ 124.257564] [drm:ironlake_crtc_mode_set], Mode for pipe B: [ 124.257569] [drm:drm_mode_debug_printmodeline], Modeline 35:"1920x1200" 60 154000 1920 1968 2000 2080 1200 1203 1209 1235 0x48 0x9 [ 124.309957] [drm:intel_wait_for_vblank], vblank wait timed out [ 124.313283] [drm:ironlake_update_plane], Writing base 00063000 00000000 0 0 7680 [ 124.316805] [drm:intel_update_fbc], [ 124.319996] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 124.323442] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 124.326929] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 124.330322] [drm:drm_crtc_helper_set_mode], [ENCODER:13:TMDS-13] set [MODE:35:1920x1200] [ 124.384927] [drm:intel_wait_for_vblank], vblank wait timed out [ 124.388145] [drm:intel_write_eld], ELD on [CONNECTOR:14:HDMI-A-1], [ENCODER:13:TMDS-13] [ 124.391596] [drm:ironlake_write_eld], ELD on pipe B [ 124.394889] [drm:ironlake_write_eld], Audio directed to unknown port [ 124.398090] [drm:ironlake_write_eld], ELD size 9 [ 124.401188] [drm:sandybridge_update_wm], FIFO watermarks For pipe A - plane 6, cursor: 6 [ 124.404555] [drm:sandybridge_update_wm], FIFO watermarks For pipe B - plane 9, cursor: 6 [ 124.459909] [drm:intel_wait_for_vblank], vblank wait timed out [ 124.514886] [drm:intel_wait_for_vblank], vblank wait timed out [ 124.518844] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x100 [ 124.521880] [drm:gen6_fdi_link_train], FDI train 1 done. [ 124.525628] [drm:gen6_fdi_link_train], FDI_RX_IIR 0x600 [ 124.528756] [drm:gen6_fdi_link_train], FDI train 2 done. [ 124.531743] [drm:gen6_fdi_link_train], FDI train done. [ 124.536023] [drm:intel_update_fbc], [ 124.538843] [drm:intel_update_fbc], more than one pipe active, disabling compression [ 124.542118] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 124.545366] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] set DPMS on [ 124.552699] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 133.469191] [drm:intel_ironlake_crt_detect_hotplug], ironlake hotplug adpa=0xf40000, result 0 [ 133.472174] [drm:intel_crt_detect], CRT not detected via hotplug [ 133.475184] [drm:output_poll_execute], [CONNECTOR:11:VGA-1] status updated from 2 to 2 [ 133.623423] [drm:drm_detect_monitor_audio], Monitor has basic audio support [ 133.626291] [drm:drm_edid_to_eld], ELD monitor DELL 2709W [ 133.629083] HDMI: DVI dual 0, max TMDS clock 190, latency present 1 0, video latency 11 0, audio latency 0 2 [ 133.632207] [drm:drm_edid_to_eld], ELD size 9, SAD count 1 [ 133.634940] [drm:output_poll_execute], [CONNECTOR:14:HDMI-A-1] status updated from 1 to 1 [ 133.638471] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 133.643464] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 133.646486] [drm:intel_dp_aux_ch], dp_aux_ch timeout status 0x5143003e [ 133.648956] [drm:intel_dp_detect], DPCD: 0000000000000000 [ 133.650611] [drm:output_poll_execute], [CONNECTOR:17:DP-1] status updated from 2 to 2 [ 152.206362] [drm:drm_crtc_helper_set_config], [ 152.206365] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 152.206381] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 152.206384] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 152.206387] [drm:drm_crtc_helper_set_config], [ 152.206389] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 152.206402] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 152.206404] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 152.634552] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 152.642375] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 152.668010] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 152.718204] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 153.644863] xkbcomp used greatest stack depth: 3280 bytes left [ 163.009145] scim-helper-man used greatest stack depth: 3232 bytes left [ 183.092322] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 183.092749] [drm:intel_prepare_page_flip], preparing flip with no unpin work? [ 183.156863] mtrr: no MTRR for b0000000,3ff0000 found [ 183.161744] [drm:drm_crtc_helper_set_config], [ 183.161747] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 183.161757] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.161759] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 183.161762] [drm:drm_crtc_helper_set_config], [ 183.161763] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 183.161770] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.161772] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 183.161774] [drm:drm_crtc_helper_set_config], [ 183.161775] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 183.161782] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.161784] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 183.161786] [drm:drm_crtc_helper_set_config], [ 183.161787] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 183.161793] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.161795] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 183.161805] [drm:drm_crtc_helper_set_config], [ 183.161806] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 183.161813] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.161815] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 183.161817] [drm:drm_crtc_helper_set_config], [ 183.161818] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 183.161824] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.161826] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 183.174248] [drm:drm_crtc_helper_set_config], [ 183.174249] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 183.174257] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.174259] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 183.174261] [drm:drm_crtc_helper_set_config], [ 183.174262] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 183.174269] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 183.174270] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 194.832240] [drm:drm_crtc_helper_set_config], [ 194.832247] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 194.832280] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 194.832288] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 194.832296] [drm:drm_crtc_helper_set_config], [ 194.832300] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 194.832325] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 194.832332] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 196.113864] [drm:drm_crtc_helper_set_config], [ 196.113871] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 196.113902] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 196.113909] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 196.113917] [drm:drm_crtc_helper_set_config], [ 196.113922] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 196.113947] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 196.113953] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 197.699508] [drm:drm_crtc_helper_set_config], [ 197.699516] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 197.699547] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 197.699592] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 197.699600] [drm:drm_crtc_helper_set_config], [ 197.699604] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 197.699631] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 197.699637] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 198.603538] [drm:drm_crtc_helper_set_config], [ 198.603546] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 198.603577] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 198.603584] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 198.603592] [drm:drm_crtc_helper_set_config], [ 198.603596] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 198.603621] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 198.603627] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 199.503617] [drm:drm_crtc_helper_set_config], [ 199.503624] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 199.503655] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 199.503662] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 199.503670] [drm:drm_crtc_helper_set_config], [ 199.503675] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 199.503700] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 199.503706] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 200.047235] [drm:drm_crtc_helper_set_config], [ 200.047244] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 200.047275] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 200.047282] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 200.047290] [drm:drm_crtc_helper_set_config], [ 200.047294] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 200.047318] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 200.047325] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 200.784212] [drm:drm_crtc_helper_set_config], [ 200.784220] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 200.784251] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 200.784258] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 200.784266] [drm:drm_crtc_helper_set_config], [ 200.784270] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 200.784295] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 200.784302] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 201.050971] [drm:drm_crtc_helper_set_config], [ 201.050978] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 201.051010] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 201.051017] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 201.051025] [drm:drm_crtc_helper_set_config], [ 201.051028] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 201.051053] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 201.051060] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 202.047692] [drm:drm_crtc_helper_set_config], [ 202.047700] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 202.047731] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 202.047738] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 202.047747] [drm:drm_crtc_helper_set_config], [ 202.047751] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 202.047776] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 202.047782] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 202.306429] [drm:drm_crtc_helper_set_config], [ 202.306436] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 202.306467] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 202.306475] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 202.306483] [drm:drm_crtc_helper_set_config], [ 202.306487] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 202.306512] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 202.306518] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 205.619663] [drm:drm_crtc_helper_set_config], [ 205.619671] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 205.619701] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 205.619709] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 205.619717] [drm:drm_crtc_helper_set_config], [ 205.619721] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 205.619746] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 205.619753] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 206.094854] [drm:drm_crtc_helper_set_config], [ 206.094861] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 206.094934] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 206.094941] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 206.094950] [drm:drm_crtc_helper_set_config], [ 206.094953] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 206.094979] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 206.094985] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 206.675754] [drm:drm_crtc_helper_set_config], [ 206.675762] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 206.675793] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 206.675801] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 206.675809] [drm:drm_crtc_helper_set_config], [ 206.675813] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 206.675837] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 206.675844] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 226.736390] [drm:drm_crtc_helper_set_config], [ 226.736397] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 226.736428] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 226.736436] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 226.736444] [drm:drm_crtc_helper_set_config], [ 226.736448] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 226.736473] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 226.736479] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.013270] [drm:drm_crtc_helper_set_config], [ 227.013277] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 227.013308] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.013316] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.013324] [drm:drm_crtc_helper_set_config], [ 227.013328] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 227.013353] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.013359] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.273994] [drm:drm_crtc_helper_set_config], [ 227.274001] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 227.274032] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.274039] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.274048] [drm:drm_crtc_helper_set_config], [ 227.274051] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 227.274076] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.274083] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.671660] [drm:drm_crtc_helper_set_config], [ 227.671667] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 227.671698] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.671706] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.671714] [drm:drm_crtc_helper_set_config], [ 227.671718] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 227.671743] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.671749] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.934396] [drm:drm_crtc_helper_set_config], [ 227.934404] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 227.934435] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.934442] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 227.934451] [drm:drm_crtc_helper_set_config], [ 227.934455] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 227.934480] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 227.934487] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 228.282735] [drm:drm_crtc_helper_set_config], [ 228.282743] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 228.282773] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 228.282781] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 228.282789] [drm:drm_crtc_helper_set_config], [ 228.282793] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 228.282818] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 228.282824] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 228.530427] [drm:drm_crtc_helper_set_config], [ 228.530435] [drm:drm_crtc_helper_set_config], [CRTC:3] [FB:36] #connectors=1 (x y) (0 0) [ 228.530466] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 228.530473] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4] [ 228.530481] [drm:drm_crtc_helper_set_config], [ 228.530485] [drm:drm_crtc_helper_set_config], [CRTC:4] [FB:36] #connectors=1 (x y) (0 0) [ 228.530510] [drm:drm_crtc_helper_set_config], [CONNECTOR:5:LVDS-1] to [CRTC:3] [ 228.530517] [drm:drm_crtc_helper_set_config], [CONNECTOR:14:HDMI-A-1] to [CRTC:4]