This adds documentation for innolux,p097pfg panel with bridge chip ssd2858.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com --- .../display/panel/innolux,p097pfg_ssd2858.txt | 39 +++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt new file mode 100644 index 000000000000..4ce55e889ad2 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg_ssd2858.txt @@ -0,0 +1,39 @@ +SSD2858 bridge + Innolux P097PFG 9.7" 1536x2048 TFT LCD panel + +Required properties: +- compatible: should be "innolux,p097pfg_ssd2858" +- reg: DSI virtual channel of the peripheral +- avdd-supply: phandle of the regulator that provides panel positive voltage +- avee-supply: phandle of the regulator that provides panel negative voltage +- pp1800-supply: phandle of the regulator that provides panel 1.8V IO power +- pp3300-supply: phandle of the regulator that provides ssd2858 3.3V URAM power +- pp1200-bridge-supply: phandle of the regulator that provides ssd2858 1.2V core power +- vddio-bridge-supply: phandle of the regulator that provides ssd2858 1.8V IO power +- enable-gpios: panel enable gpio + +Optional properties: +- backlight: phandle of the backlight device attached to the panel + +Example: + + &dsi0 { + panel: panel@0 { + compatible = "innolux,p097pfg_ssd2858"; + reg = <0>; + enable-gpios = <&pio 45 0 &pio 73 0>; + avdd-supply = <...>; + avee-supply = <...>; + pp1800-supply = <...>; + pp3300-supply = <...>; + pp1200-bridge-supply = <...>; + vddio-bridge-supply = <...>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; + + };