Signed-off-by: Guido Günther agx@sigxcpu.org --- .../bindings/phy/mixel,mipi-dsi-phy.txt | 29 +++++++++++++++++++ 1 file changed, 29 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt
diff --git a/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt new file mode 100644 index 000000000000..10323ae8ee37 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mixel,mipi-dsi-phy.txt @@ -0,0 +1,29 @@ +Mixel DSI PHY for i.MX8 + +The Mixel MIPI-DSI PHY IP block is e.g. found on MX8 platforms (along +the MIPI-DSI IP from Northwest Logic). It represents the physical +layer for the electrical signals for DSI. + +Required properties: +- compatible: Must be: + - "mixel,imx8mq-mipi-dphy" +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Must contain the following entries: + - "phy_ref": phandle and specifier referring to the DPHY ref clock +- reg: the register range of the PHY controller +- #phy-cells: number of cells in PHY, as defined in + Documentation/devicetree/bindings/phy/phy-bindings.txt + this must be <0> + +Optional properties: +- power-domains: phandle to power domain + +Example: + mipi_dphy: mipi_dphy@30A0030 { + compatible = "mixel,imx8mq-mipi-dphy"; + clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>; + clock-names = "phy_ref"; + reg = <0x30A00300 0x100>; + power-domains = <&pd_mipi0>; + #phy-cells = <0>; + };