On Fri, Feb 28, 2020 at 1:57 AM Gerd Hoffmann kraxel@redhat.com wrote:
On Thu, Feb 27, 2020 at 01:04:54PM -0800, Alistair Francis wrote:
The QEMU model for the Bochs display has no VGA memory section at offset 0x400 [1]. By writing to this register Linux can create a write to unassigned memory which depending on machine and architecture can result in a store fault.
I don't see any reference to this address at OSDev [2] or in the Bochs source code.
Removing this write still allows graphics to work inside QEMU with the bochs-display.
It's not that simple. The driver also handles the qemu stdvga (-device VGA, -device secondary-vga) which *does* need the vga port write. There is no way for the guest to figure whenever the device is secondary-vga or bochs-display.
So how about fixing things on the host side? Does qemu patch below help?
That patch looks like it will fix the problem, but it doesn't seem like the correct fix. I would rather avoid adding a large chunk of dummy I/O to handle the two devices.
Maybe another possible approach is to enable/disable vga access per arch. On x86 this doesn't cause any problems. I guess you are on risc-v?
I would prefer this option. I do see this on RISC-V, but I suspect the issue will appear on other architectures (although how they handle I/O failures in QEMU is a different story).
Can I just do the VGA write if x86?
Alistair
cheers, Gerd
diff --git a/hw/display/bochs-display.c b/hw/display/bochs-display.c index 62085f9fc063..e93e838243b8 100644 --- a/hw/display/bochs-display.c +++ b/hw/display/bochs-display.c @@ -151,6 +151,26 @@ static const MemoryRegionOps bochs_display_qext_ops = { .endianness = DEVICE_LITTLE_ENDIAN, };
+static uint64_t dummy_read(void *ptr, hwaddr addr, unsigned size) +{
- return -1;
+}
+static void dummy_write(void *ptr, hwaddr addr,
uint64_t val, unsigned size)+{ +}
+static const MemoryRegionOps dummy_ops = {
- .read = dummy_read,
- .write = dummy_write,
- .valid.min_access_size = 1,
- .valid.max_access_size = 4,
- .impl.min_access_size = 1,
- .impl.max_access_size = 1,
- .endianness = DEVICE_LITTLE_ENDIAN,
+};
static int bochs_display_get_mode(BochsDisplayState *s, BochsDisplayMode *mode) { @@ -284,8 +304,8 @@ static void bochs_display_realize(PCIDevice *dev, Error **errp) memory_region_init_io(&s->qext, obj, &bochs_display_qext_ops, s, "qemu extended regs", PCI_VGA_QEXT_SIZE);
- memory_region_init(&s->mmio, obj, "bochs-display-mmio",
PCI_VGA_MMIO_SIZE);
- memory_region_init_io(&s->mmio, obj, &dummy_ops, NULL,
"bochs-display-mmio", PCI_VGA_MMIO_SIZE);