Mali-DP display processors are able to write the composition result to a memory buffer via the SE.
Add entry points in the HAL for enabling/disabling this feature, and implement support for it on DP650 and DP550. DP500 acts differently and so is omitted from this change.
Changes since v3: - Fix missing vsync interrupt for DP550
Signed-off-by: Liviu Dudau Liviu.Dudau@arm.com Signed-off-by: Brian Starkey brian.starkey@arm.com [rebased and fixed conflicts] Signed-off-by: Mihail Atanassov mihail.atanassov@arm.com --- drivers/gpu/drm/arm/malidp_hw.c | 53 +++++++++++++++++++++++++++++++++++++-- drivers/gpu/drm/arm/malidp_hw.h | 17 +++++++++++++ drivers/gpu/drm/arm/malidp_regs.h | 15 +++++++++++ 3 files changed, 83 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/arm/malidp_hw.c b/drivers/gpu/drm/arm/malidp_hw.c index 28360b8542f7..accb57e2aa30 100644 --- a/drivers/gpu/drm/arm/malidp_hw.c +++ b/drivers/gpu/drm/arm/malidp_hw.c @@ -588,6 +588,48 @@ static long malidp550_se_calc_mclk(struct malidp_hw_device *hwdev, return ret; }
+static int malidp550_enable_memwrite(struct malidp_hw_device *hwdev, + dma_addr_t *addrs, s32 *pitches, + int num_planes, u16 w, u16 h, u32 fmt_id) +{ + u32 base = MALIDP550_SE_MEMWRITE_BASE; + u32 de_base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK); + + /* enable the scaling engine block */ + malidp_hw_setbits(hwdev, MALIDP_SCALE_ENGINE_EN, de_base + MALIDP_DE_DISPLAY_FUNC); + + malidp_hw_write(hwdev, fmt_id, base + MALIDP_MW_FORMAT); + switch (num_planes) { + case 2: + malidp_hw_write(hwdev, lower_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_LOW); + malidp_hw_write(hwdev, upper_32_bits(addrs[1]), base + MALIDP_MW_P2_PTR_HIGH); + malidp_hw_write(hwdev, pitches[1], base + MALIDP_MW_P2_STRIDE); + /* fall through */ + case 1: + malidp_hw_write(hwdev, lower_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_LOW); + malidp_hw_write(hwdev, upper_32_bits(addrs[0]), base + MALIDP_MW_P1_PTR_HIGH); + malidp_hw_write(hwdev, pitches[0], base + MALIDP_MW_P1_STRIDE); + break; + default: + WARN(1, "Invalid number of planes"); + } + + malidp_hw_write(hwdev, MALIDP_DE_H_ACTIVE(w) | MALIDP_DE_V_ACTIVE(h), + MALIDP550_SE_MEMWRITE_OUT_SIZE); + malidp_hw_setbits(hwdev, MALIDP550_SE_MEMWRITE_ONESHOT | MALIDP_SE_MEMWRITE_EN, + MALIDP550_SE_CONTROL); + + return 0; +} + +static void malidp550_disable_memwrite(struct malidp_hw_device *hwdev) +{ + u32 base = malidp_get_block_base(hwdev, MALIDP_DE_BLOCK); + malidp_hw_clearbits(hwdev, MALIDP550_SE_MEMWRITE_ONESHOT | MALIDP_SE_MEMWRITE_EN, + MALIDP550_SE_CONTROL); + malidp_hw_clearbits(hwdev, MALIDP_SCALE_ENGINE_EN, base + MALIDP_DE_DISPLAY_FUNC); +} + static int malidp650_query_hw(struct malidp_hw_device *hwdev) { u32 conf = malidp_hw_read(hwdev, MALIDP550_CONFIG_ID); @@ -673,9 +715,11 @@ const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES] = { .se_irq_map = { .irq_mask = MALIDP550_SE_IRQ_EOW | MALIDP550_SE_IRQ_AXI_ERR, + .vsync_irq = MALIDP550_SE_IRQ_EOW, }, .dc_irq_map = { - .irq_mask = MALIDP550_DC_IRQ_CONF_VALID, + .irq_mask = MALIDP550_DC_IRQ_CONF_VALID | + MALIDP550_DC_IRQ_SE, .vsync_irq = MALIDP550_DC_IRQ_CONF_VALID, }, .pixel_formats = malidp550_de_formats, @@ -691,6 +735,8 @@ const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES] = { .rotmem_required = malidp550_rotmem_required, .se_set_scaling_coeffs = malidp550_se_set_scaling_coeffs, .se_calc_mclk = malidp550_se_calc_mclk, + .enable_memwrite = malidp550_enable_memwrite, + .disable_memwrite = malidp550_disable_memwrite, .features = 0, }, [MALIDP_650] = { @@ -713,7 +759,8 @@ const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES] = { MALIDP550_SE_IRQ_AXI_ERR, }, .dc_irq_map = { - .irq_mask = MALIDP550_DC_IRQ_CONF_VALID, + .irq_mask = MALIDP550_DC_IRQ_CONF_VALID | + MALIDP550_DC_IRQ_SE, .vsync_irq = MALIDP550_DC_IRQ_CONF_VALID, }, .pixel_formats = malidp550_de_formats, @@ -729,6 +776,8 @@ const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES] = { .rotmem_required = malidp550_rotmem_required, .se_set_scaling_coeffs = malidp550_se_set_scaling_coeffs, .se_calc_mclk = malidp550_se_calc_mclk, + .enable_memwrite = malidp550_enable_memwrite, + .disable_memwrite = malidp550_disable_memwrite, .features = 0, }, }; diff --git a/drivers/gpu/drm/arm/malidp_hw.h b/drivers/gpu/drm/arm/malidp_hw.h index 849ad9a30c3a..a10f5636fa36 100644 --- a/drivers/gpu/drm/arm/malidp_hw.h +++ b/drivers/gpu/drm/arm/malidp_hw.h @@ -180,6 +180,23 @@ struct malidp_hw_device { long (*se_calc_mclk)(struct malidp_hw_device *hwdev, struct malidp_se_config *se_config, struct videomode *vm); + /** + * Enable writing to memory the content of the next frame + * @param hwdev - malidp_hw_device structure containing the HW description + * @param addrs - array of addresses for each plane + * @param pitches - array of pitches for each plane + * @param num_planes - number of planes to be written + * @param w - width of the output frame + * @param h - height of the output frame + * @param fmt_id - internal format ID of output buffer + */ + int (*enable_memwrite)(struct malidp_hw_device *hwdev, dma_addr_t *addrs, + s32 *pitches, int num_planes, u16 w, u16 h, u32 fmt_id); + + /* + * Disable the writing to memory of the next frame's content. + */ + void (*disable_memwrite)(struct malidp_hw_device *hwdev);
u8 features;
diff --git a/drivers/gpu/drm/arm/malidp_regs.h b/drivers/gpu/drm/arm/malidp_regs.h index 2039f857f77d..40527ae77c0a 100644 --- a/drivers/gpu/drm/arm/malidp_regs.h +++ b/drivers/gpu/drm/arm/malidp_regs.h @@ -66,6 +66,8 @@ #define MALIDP_DISP_FUNC_GAMMA (1 << 0) #define MALIDP_DISP_FUNC_CADJ (1 << 4) #define MALIDP_DISP_FUNC_ILACED (1 << 8) +#define MALIDP_SCALE_ENGINE_EN (1 << 16) +#define MALIDP_SE_MEMWRITE_EN (2 << 5)
/* register offsets for IRQ management */ #define MALIDP_REG_STATUS 0x00000 @@ -153,6 +155,16 @@ (((x) & MALIDP_SE_ENH_LIMIT_MASK) << 16) #define MALIDP_SE_ENH_COEFF0 0x04
+ +/* register offsets relative to MALIDP5x0_SE_MEMWRITE_BASE */ +#define MALIDP_MW_FORMAT 0x00000 +#define MALIDP_MW_P1_STRIDE 0x00004 +#define MALIDP_MW_P2_STRIDE 0x00008 +#define MALIDP_MW_P1_PTR_LOW 0x0000c +#define MALIDP_MW_P1_PTR_HIGH 0x00010 +#define MALIDP_MW_P2_PTR_LOW 0x0002c +#define MALIDP_MW_P2_PTR_HIGH 0x00030 + /* register offsets and bits specific to DP500 */ #define MALIDP500_ADDR_SPACE_SIZE 0x01000 #define MALIDP500_DC_BASE 0x00000 @@ -224,6 +236,9 @@ #define MALIDP550_DE_PERF_BASE 0x00500 #define MALIDP550_SE_BASE 0x08000 #define MALIDP550_SE_CONTROL 0x08010 +#define MALIDP550_SE_MEMWRITE_ONESHOT (1 << 7) +#define MALIDP550_SE_MEMWRITE_OUT_SIZE 0x08030 +#define MALIDP550_SE_MEMWRITE_BASE 0x08100 #define MALIDP550_DC_BASE 0x0c000 #define MALIDP550_DC_CONTROL 0x0c010 #define MALIDP550_DC_CONFIG_REQ (1 << 16)