Since the mipi dsi driver need to use the clock of vop to make the calculation of Blanking. But sometimes the clock driver can not set a accurate clock_rate for vop, get it by clk_round_rate before mode_set, so we can get the true value.
Signed-off-by: Chris Zhong zyw@rock-chips.com Acked-by: Mark Yao mark.yao@rock-chips.com
---
Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: - use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
Changes in v3: None
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index f5b3da2..056cac3 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -878,9 +878,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc, const struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) { + struct vop *vop = to_vop(crtc); + if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0) return false;
+ adjusted_mode->clock = + clk_round_rate(vop->dclk, mode->clock * 1000) / 1000; + return true; }