On Tue, Jan 28, 2020 at 5:44 PM Daniel Vetter daniel@ffwll.ch wrote:
On Tue, Jan 28, 2020 at 5:39 PM Daniel Vetter daniel@ffwll.ch wrote:
On Mon, Jan 20, 2020 at 11:00 AM Gerd Hoffmann kraxel@redhat.com wrote:
Problem: do_unregister_framebuffer() might return before the device is fully cleaned up, due to userspace having a file handle for /dev/fb0 open. Which can result in drm driver not being able to grab resources (and fail initialization) because the firmware framebuffer still holds them. Reportedly plymouth can trigger this.
Fix this by trying to wait until all references are gone. Don't wait forever though given that userspace might keep the file handle open.
Reported-by: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com Signed-off-by: Gerd Hoffmann kraxel@redhat.com
(Missed this because lca, so a bit late)
This isn't really how driver unload is supposed to happen. Instead:
- Driver unload starts
- Driver calls the foo_unregister function, which stops new userspace
from getting at the driver. If you're subsystem is good (i.e. drm since Noralf fixed it) this will also sufficiently synchronize with any pending ioctl.
- Important: This does _not_ wait until userspace closes all
references. You can't force that.
- Driver releases all hw structures and mappings and everything else.
With fbdev this is currently not fully race free because no one is synchronizing with userspace everywhere correctly.
... much time can pass ...
- Userspace releases the last references, which triggers the final
destroy stuff and which releases the memory occupied by various structures still (but not anything releated to hw or anything else really).
So there's two bits:
- Synchronizing with pending ioctls. This is mostly there already
with lock_fb_info/unlock_fb_info. From a quick look the missing bit seems to be that the unregister code is not taking that lock, and so not sufficiently synchronizing against concurrent ioctl calls and other stuff. Plus would need to audit all entry points.
Correction: The check here is file_fb_info(), which checks for unregister. Except it's totally racy and misses the end marker (unlike drm_dev_enter/exit in drm). So bunch of work to do here too. The lock_fb_info is purely locking, not lifetime (and I think in a bunch of places way too late).
Oh and since your patch is full of races too I expect you'll be able to get away with just adding the ->fb_remove hook, fix up drivers, and leave fixing the various races to someone else. -Daniel
1a. fbcon works differently. Don't look too closely, but this is also not the problem your facing here.
- Refcounting of the fb structure and hw teardown. That's what's
tracked in fb_info->count. Most likely the fbdev driver you have has a wrong split between the hw teardown code and what's in fb_destroy. If you have any hw cleanup code in fb_destroy that driver is buggy. efifb is very buggy in that area :-) Same for offb, simplefb, vesafb and vesa16fb.
We might need a new fb_unregister callback for these drivers to be able to fix this properly. Because the unregister comes from the fbdev core, and not the driver as usual, so the usual driver unload sequence doesnt work:
drm_dev_unregister(); ... release all hw resource ...
drm_dev_put();
Or in terms of fbdev:
unregister_framebuffer(info); ... release all hw resources ... <- everyone gets this wrong framebuffer_release(info); <- also wrong because not refcounted, hooray, this should be moved to to end of the ->fb_destroy callback
So we need a callback to put the "release all hw resources" step into the flow at the right place. Another option (slightly less midlayer) would be to add a fb_takeover hook, for these platforms drivers, which would then do the above sequence (like at driver unload).
Also adding Noralf, since he's fixed up all the drm stuff in this area in the past.
Cheers, Daniel
drivers/video/fbdev/core/fbmem.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c index d04554959ea7..2ea8ac05b065 100644 --- a/drivers/video/fbdev/core/fbmem.c +++ b/drivers/video/fbdev/core/fbmem.c @@ -35,6 +35,7 @@ #include <linux/fbcon.h> #include <linux/mem_encrypt.h> #include <linux/pci.h> +#include <linux/delay.h>
#include <asm/fb.h>
@@ -1707,6 +1708,8 @@ static void unlink_framebuffer(struct fb_info *fb_info)
static void do_unregister_framebuffer(struct fb_info *fb_info) {
int limit = 100;unlink_framebuffer(fb_info); if (fb_info->pixmap.addr && (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))@@ -1726,6 +1729,10 @@ static void do_unregister_framebuffer(struct fb_info *fb_info) fbcon_fb_unregistered(fb_info); console_unlock();
/* try wait until all references are gone */while (atomic_read(&fb_info->count) > 1 && --limit > 0)msleep(10);/* this may free fb info */ put_fb_info(fb_info);}
2.18.1
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
-- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch
-- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch