On Mon, Oct 01, 2018 at 11:27:08AM +0200, Quentin Schulz wrote:
Hi Manasi,
On Fri, Sep 21, 2018 at 12:59:30AM -0700, Manasi Navare wrote:
Thanks for the patch. Verified with the DP 1.4 spec and looks good to me. Also look at the related patch that makes use of the correct extended capabilities:
If I'm not mistaken, you could get rid of the patch in the Intel driver when we have this one merged. Is there any reason not to, have I missed something?
i915 (and most other drivers) don't use this code. Also as mentioned in that thread you should probably validate that the data in the extended caps looks sane, otherwise the entire point of having it for compatibility with older source devices is lost.
Thanks, Quentin
Reviewed-by: Manasi Navare manasi.d.navare@intel.com
Manasi
On Thu, Sep 20, 2018 at 03:54:37PM +0100, Damian Kos wrote:
From: Quentin Schulz quentin.schulz@free-electrons.com
DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the "true capabilities" of DPRX device.
Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT might falsely return lower capabilities to "avoid interoperability issues with some of the existing DP Source devices that malfunction when they discover the higher capabilities within those three registers.".
Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved and read 0 so it's safe to check against it even if DP revision is <1.4
Signed-off-by: Quentin Schulz quentin.schulz@free-electrons.com Signed-off-by: Damian Kos dkos@cadence.com
drivers/gpu/drm/drm_dp_helper.c | 30 +++++++++++++++++++++++++++++- 1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 8c6b9fd89f8a..735ebde5c2f0 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -370,10 +370,38 @@ int drm_dp_link_probe(struct drm_dp_aux *aux, struct drm_dp_link *link) { u8 values[3]; int err;
unsigned int addr;
memset(link, 0, sizeof(*link));
- err = drm_dp_dpcd_read(aux, DP_DPCD_REV, values, sizeof(values));
- /*
* DP 1.4 introduced a DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit in* DP_TRAINING_AUX_RD_INTERVAL register. If set, DPCD registers from* DP_DPCD_REV to DP_ADAPTER_CAP should be retrieved starting from* DP_DPCD_REV_EXTENDED. All registers are copied except DP_DPCD_REV,* DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT which represent the* "true capabilities" of DPRX device.** Original DP_DPCD_REV, DP_MAX_LINK_RATE and DP_DOWNSTREAMPORT_PRESENT* might falsely return lower capabilities to "avoid interoperability* issues with some of the existing DP Source devices that malfunction* when they discover the higher capabilities within those three* registers.".** Before DP 1.4, DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT bit was reserved* and read 0 so it's safe to check against it even if DP revision is* <1.4*/- err = drm_dp_dpcd_readb(aux, DP_TRAINING_AUX_RD_INTERVAL, values);
- if (err < 0)
return err;- if (values[0] & DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT)
addr = DP_DP13_DPCD_REV;- else
addr = DP_DPCD_REV;- err = drm_dp_dpcd_read(aux, addr, values, sizeof(values)); if (err < 0) return err;
-- 2.17.1
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel