On Wed, Sep 01, 2021 at 06:07:30PM +0000, Yassine Oudjana wrote:
Add a device tree binding for LG.Philips SW43101.
Signed-off-by: Yassine Oudjana y.oudjana@protonmail.com
.../display/panel/lgphilips,sw43101.yaml | 52 +++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml new file mode 100644 index 000000000000..da049e9f244e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: BSD-3-Clause
Not the right license(s). checkpatch.pl will tell you.
+%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/lgphilips,sw43101.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: LG.Philips SW43101 1080x1920 OLED panel
+maintainers:
- Yassine Oudjana y.oudjana@protonmail.com
+allOf:
- $ref: panel-common.yaml#
+properties:
- compatible:
- const: lgphilips,sw43101
Looks like this can be added to panel-simple-dsi.yaml instead. Unless it has more than 1 power rail as you didn't document any.
- port: true
- reg: true
- reset-gpios: true
+required:
- compatible
- reg
- reset-gpios
+additionalProperties: false
+examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- dsi {
#address-cells = <1>;#size-cells = <0>;panel@0 {compatible = "lgphilips,sw43101";reg = <0>;reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>;port {panel_in: endpoint {remote-endpoint = <&dsi_out>;};};};- };
+...
2.33.0