From: Ondrej Jirman megous@megous.com
This series implements support for Xunlong Orange Pi 3 board.
Unfortunately, this board needs some small driver patches, so I have split the boards DT patch into chunks that require patches for drivers in various subsystems.
Suggested merging plan/dependencies:
- Pinctrl and stmmac patches are needed for ethernet support. (patches 1-5) - these should be ready now - HDMI support - waits for DT review. (patches 6-8) - mmc1 pinconf (patch 9) can probably be merged now, too (it will certainly be used soon by all the other WiFi featuring boards based on H6)
This patch is also needed to not get segfault on boot (it was already merged): https://lkml.org/lkml/2019/4/5/856
Changes in v2: - added dt-bindings documentation for the board's compatible string (suggested by Clement) - addressed checkpatch warnings and code formatting issues (on Maxime's suggestions) - stmmac: dropped useless parenthesis, reworded description of the patch (suggested by Sergei) - drop useles dev_info() about the selected io bias voltage - docummented io voltage bias selection variant macros - wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE", because wifi depends on H6 RTC support that's not merged yet (suggested by Clement) - added missing signed-of-bys - changed &usb2otg dr_mode to otg, and added a note about VBUS - improved wording of HDMI driver's DDC power supply patch
Changes in v3: - dropped already applied patches - changed pinctrl I/O bias selection constants to enum and renamed - added /omit-if-no-ref/ to mmc1_pins - made mmc1_pins default pinconf for mmc1 in H6 dtsi - move ddc-supply to HDMI connector node, updated patch descriptions, changed dt-bindings docs
Changes in v4: - fix checkpatch warnings/style issues - use enum in struct sunxi_desc_function for io_bias_cfg_variant - collected acked-by's - fix compile error in drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c:156 caused by missing conversion from has_io_bias_cfg struct member (I've kept the acked-by, because it's a trivial change, but feel free to object.) (reported by Martin A. on github) I did not have A80 pinctrl enabled for some reason, so I did not catch this sooner. - dropped brcm firmware patch (was already applied) - dropped the wifi dts patch (will re-send after H6 RTC gets merged, along with bluetooth support, in a separate series)
Please take a look.
thank you and regards, Ondrej Jirman
Icenowy Zheng (2): net: stmmac: sun8i: add support for Allwinner H6 EMAC net: stmmac: sun8i: force select external PHY when no internal one
Ondrej Jirman (7): pinctrl: sunxi: Prepare for alternative bias voltage setting methods pinctrl: sunxi: Support I/O bias voltage setting on H6 arm64: dts: allwinner: orange-pi-3: Enable ethernet dt-bindings: display: hdmi-connector: Add DDC power supply drm: sun4i: Add support for enabling DDC I2C bus power to dw_hdmi glue arm64: dts: allwinner: orange-pi-3: Enable HDMI output arm64: dts: allwinner: h6: Add MMC1 pins
.../display/connector/hdmi-connector.txt | 1 + .../dts/allwinner/sun50i-h6-orangepi-3.dts | 79 +++++++++++++++++++ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 11 +++ drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 61 +++++++++++++- drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 2 + .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 21 +++++ drivers/pinctrl/sunxi/pinctrl-sun50i-h6.c | 1 + drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c | 2 +- drivers/pinctrl/sunxi/pinctrl-sun9i-a80.c | 2 +- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 56 ++++++++----- drivers/pinctrl/sunxi/pinctrl-sunxi.h | 18 ++++- 11 files changed, 230 insertions(+), 24 deletions(-)