From: Edmund Dea edmund.j.dea@intel.com
Due to HW limitations, KMB cannot change height, width, or pixel format after initial plane configuration.
Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display") Signed-off-by: Edmund Dea edmund.j.dea@intel.com Signed-off-by: Anitha Chrisanthus anitha.chrisanthus@intel.com --- drivers/gpu/drm/kmb/kmb_crtc.c | 2 ++ drivers/gpu/drm/kmb/kmb_drv.h | 1 + drivers/gpu/drm/kmb/kmb_plane.c | 44 ++++++++++++++++++++++++++++++++- drivers/gpu/drm/kmb/kmb_plane.h | 6 +++++ 4 files changed, 52 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/kmb/kmb_crtc.c b/drivers/gpu/drm/kmb/kmb_crtc.c index 08a45e813db7..0e42c40f0dce 100644 --- a/drivers/gpu/drm/kmb/kmb_crtc.c +++ b/drivers/gpu/drm/kmb/kmb_crtc.c @@ -232,6 +232,8 @@ int kmb_setup_crtc(struct drm_device *drm) struct kmb_plane *primary; int ret;
+ memset(kmb->init_disp_cfg, 0, sizeof(kmb->init_disp_cfg)); + primary = kmb_plane_init(drm); if (IS_ERR(primary)) return PTR_ERR(primary); diff --git a/drivers/gpu/drm/kmb/kmb_drv.h b/drivers/gpu/drm/kmb/kmb_drv.h index d297218869e8..b3203f583a46 100644 --- a/drivers/gpu/drm/kmb/kmb_drv.h +++ b/drivers/gpu/drm/kmb/kmb_drv.h @@ -57,6 +57,7 @@ struct kmb_drm_private { spinlock_t irq_lock; int irq_lcd; int sys_clk_mhz; + struct disp_cfg init_disp_cfg[KMB_MAX_PLANES]; struct layer_status plane_status[KMB_MAX_PLANES]; int kmb_under_flow; int kmb_flush_done; diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c index e61c2798c206..ae4ebba5ea2a 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.c +++ b/drivers/gpu/drm/kmb/kmb_plane.c @@ -71,12 +71,26 @@ static const u32 kmb_formats_v[] = {
static unsigned int check_pixel_format(struct drm_plane *plane, u32 format) { + struct kmb_drm_private *kmb; + struct kmb_plane *kmb_plane = to_kmb_plane(plane); int i; + int plane_id = kmb_plane->id; + struct disp_cfg init_disp_cfg;
+ kmb = to_kmb(plane->dev); + init_disp_cfg = kmb->init_disp_cfg[plane_id]; + /* Due to HW limitations, changing pixel format after initial + * plane configuration is not supported. + */ + if (init_disp_cfg.format && init_disp_cfg.format != format) { + drm_dbg(&kmb->drm, "Cannot change format after initial plane configuration"); + return -EINVAL; + } for (i = 0; i < plane->format_count; i++) { if (plane->format_types[i] == format) return 0; } + return -EINVAL; }
@@ -85,11 +99,17 @@ static int kmb_plane_atomic_check(struct drm_plane *plane, { struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); + struct kmb_drm_private *kmb; + struct kmb_plane *kmb_plane = to_kmb_plane(plane); + int plane_id = kmb_plane->id; + struct disp_cfg init_disp_cfg; struct drm_framebuffer *fb; int ret; struct drm_crtc_state *crtc_state; bool can_position;
+ kmb = to_kmb(plane->dev); + init_disp_cfg = kmb->init_disp_cfg[plane_id]; fb = new_plane_state->fb; if (!fb || !new_plane_state->crtc) return 0; @@ -102,6 +122,16 @@ static int kmb_plane_atomic_check(struct drm_plane *plane, return -EINVAL; if (new_plane_state->crtc_w < KMB_MIN_WIDTH || new_plane_state->crtc_h < KMB_MIN_HEIGHT) return -EINVAL; + + /* Due to HW limitations, changing plane height or width after + * initial plane configuration is not supported. + */ + if ((init_disp_cfg.width && init_disp_cfg.height) && + (init_disp_cfg.width != fb->width || + init_disp_cfg.height != fb->height)) { + drm_dbg(&kmb->drm, "Cannot change plane height or width after initial configuration"); + return -EINVAL; + } can_position = (plane->type == DRM_PLANE_TYPE_OVERLAY); crtc_state = drm_atomic_get_existing_crtc_state(state, @@ -300,6 +330,7 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, unsigned char plane_id; int num_planes; static dma_addr_t addr[MAX_SUB_PLANES]; + struct disp_cfg *init_disp_cfg; struct viv_vidmem_metadata *md = NULL; struct drm_gem_object *gem_obj; unsigned int cb_stride, cr_stride; @@ -324,7 +355,8 @@ static void kmb_plane_atomic_update(struct drm_plane *plane, } spin_unlock_irq(&kmb->irq_lock);
- src_w = (new_plane_state->src_w >> 16); + init_disp_cfg = &kmb->init_disp_cfg[plane_id]; + src_w = new_plane_state->src_w >> 16; src_h = new_plane_state->src_h >> 16; crtc_x = new_plane_state->crtc_x; crtc_y = new_plane_state->crtc_y; @@ -484,6 +516,16 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
/* Enable DMA */ kmb_write_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id), dma_cfg); + + /* Save initial display config */ + if (!init_disp_cfg->width || + !init_disp_cfg->height || + !init_disp_cfg->format) { + init_disp_cfg->width = width; + init_disp_cfg->height = height; + init_disp_cfg->format = fb->format->format; + } + drm_dbg(&kmb->drm, "dma_cfg=0x%x LCD_DMA_CFG=0x%x\n", dma_cfg, kmb_read_lcd(kmb, LCD_LAYERn_DMA_CFG(plane_id)));
diff --git a/drivers/gpu/drm/kmb/kmb_plane.h b/drivers/gpu/drm/kmb/kmb_plane.h index 486490f7a3ec..99207b35365c 100644 --- a/drivers/gpu/drm/kmb/kmb_plane.h +++ b/drivers/gpu/drm/kmb/kmb_plane.h @@ -62,6 +62,12 @@ struct layer_status { u32 ctrl; };
+struct disp_cfg { + unsigned int width; + unsigned int height; + unsigned int format; +}; + struct kmb_plane *kmb_plane_init(struct drm_device *drm); void kmb_plane_destroy(struct drm_plane *plane); #endif /* __KMB_PLANE_H__ */