From: Jie Qiu jie.qiu@mediatek.com
MT8173 HDMI hardware has a output control bit to enable/disable HDMI output. Because of security reason, so this bit can ONLY be controlled in ARM supervisor mode. Now the only way to enter ARM supervisor is the ARM trusted firmware. So atf provides a API for HDMI driver to call to setup this HDMI control bit to enable HDMI output in supervisor mode.
Signed-off-by: Jie Qiu jie.qiu@mediatek.com Signed-off-by: Philipp Zabel p.zabel@pengutronix.de --- Changes since v9: - dropped hack to call __invoke_psci_fn_smc, use arm_smccc_smc instead --- drivers/gpu/drm/mediatek/mtk_hdmi_hw.c | 12 ++++++++++++ drivers/gpu/drm/mediatek/mtk_hdmi_regs.h | 1 + 2 files changed, 13 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_hw.c b/drivers/gpu/drm/mediatek/mtk_hdmi_hw.c index 99c7ffc..ea4e35f 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi_hw.c +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_hw.c @@ -15,6 +15,7 @@ #include "mtk_hdmi_regs.h" #include "mtk_hdmi.h"
+#include <linux/arm-smccc.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/hdmi.h> @@ -50,6 +51,17 @@ void mtk_hdmi_hw_vid_black(struct mtk_hdmi *hdmi,
void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable) { + struct arm_smccc_res res; + + /* + * MT8173 HDMI hardware has an output control bit to enable/disable HDMI + * output. This bit can only be controlled in ARM supervisor mode. + * The ARM trusted firmware provides an API for the HDMI driver to set + * this control bit to enable HDMI output in supervisor mode. + */ + arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904, 0x80000000, + 0, 0, 0, 0, 0, &res); + regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG20, HDMI_PCLK_FREE_RUN, enable ? HDMI_PCLK_FREE_RUN : 0); regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG1C, diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_regs.h b/drivers/gpu/drm/mediatek/mtk_hdmi_regs.h index 8c1d318..d88279f 100644 --- a/drivers/gpu/drm/mediatek/mtk_hdmi_regs.h +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_regs.h @@ -218,4 +218,5 @@ #define MHL_SYNC_AUTO_EN BIT(30) #define HDMI_PCLK_FREE_RUN BIT(31)
+#define MTK_SIP_SET_AUTHORIZED_SECURE_REG 0x82000001 #endif