This patch takes care of the write-only registers of the tda998x.
The registers SOFTRESET, TBG_CNTRL_0 and TBG_CNTRL_1 have all bits cleared after reset, so, they may be fully re-written.
The register MAT_CONTRL is set to MAT_CONTRL_MAT_BP | MAT_CONTRL_MAT_SC(1) after reset, so, it may be fully set again to this value.
Signed-off-by: Jean-Francois Moine moinejf@free.fr --- drivers/gpu/drm/i2c/tda998x_drv.c | 46 ++++++++++++++++++++------------------- 1 file changed, 24 insertions(+), 22 deletions(-)
diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index 978edaf..b6fdeb7 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -495,9 +495,9 @@ static void tda998x_reset(struct tda998x_priv *priv) { /* reset audio and i2c master: */ - reg_set(priv, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); + reg_write(priv, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); msleep(50); - reg_clear(priv, REG_SOFTRESET, SOFTRESET_AUDIO | SOFTRESET_I2C_MASTER); + reg_write(priv, REG_SOFTRESET, 0); msleep(50);
/* reset transmitter: */ @@ -853,7 +853,7 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder, reg_set(priv, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
/* set HDMI HDCP mode off: */ - reg_set(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS); + reg_write(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS); reg_clear(priv, REG_TX33, TX33_HDMI); reg_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(0));
@@ -880,38 +880,28 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder, PLL_SERIAL_2_SRL_PR(rep));
/* set color matrix bypass flag: */ - reg_set(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP); + reg_write(priv, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP | + MAT_CONTRL_MAT_SC(1));
/* set BIAS tmds value: */ reg_write(priv, REG_ANA_GENERAL, 0x09);
- reg_clear(priv, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_MTHD); + reg_write(priv, REG_TBG_CNTRL_0, 0);
/* * Sync on rising HSYNC/VSYNC */ - reg_write(priv, REG_VIP_CNTRL_3, 0); - reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_SYNC_HS); + reg = VIP_CNTRL_3_SYNC_HS;
/* * TDA19988 requires high-active sync at input stage, * so invert low-active sync provided by master encoder here */ if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC) - reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL); + reg |= VIP_CNTRL_3_H_TGL; if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC) - reg_set(priv, REG_VIP_CNTRL_3, VIP_CNTRL_3_V_TGL); - - /* - * Always generate sync polarity relative to input sync and - * revert input stage toggled sync at output stage - */ - reg = TBG_CNTRL_1_TGL_EN; - if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC) - reg |= TBG_CNTRL_1_H_TGL; - if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC) - reg |= TBG_CNTRL_1_V_TGL; - reg_write(priv, REG_TBG_CNTRL_1, reg); + reg |= VIP_CNTRL_3_V_TGL; + reg_write(priv, REG_VIP_CNTRL_3, reg);
reg_write(priv, REG_VIDFORMAT, 0x00); reg_write16(priv, REG_REFPIX_MSB, ref_pix); @@ -940,13 +930,25 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder, reg_write(priv, REG_ENABLE_SPACE, 0x01); }
+ /* + * Always generate sync polarity relative to input sync and + * revert input stage toggled sync at output stage + */ + reg = TBG_CNTRL_1_DWIN_DIS | TBG_CNTRL_1_TGL_EN; + if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC) + reg |= TBG_CNTRL_1_H_TGL; + if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC) + reg |= TBG_CNTRL_1_V_TGL; + reg_write(priv, REG_TBG_CNTRL_1, reg); + /* must be last register set: */ - reg_clear(priv, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_ONCE); + reg_write(priv, REG_TBG_CNTRL_0, 0);
/* Only setup the info frames if the sink is HDMI */ if (priv->is_hdmi_sink) { /* We need to turn HDMI HDCP stuff on to get audio through */ - reg_clear(priv, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS); + reg &= ~TBG_CNTRL_1_DWIN_DIS; + reg_write(priv, REG_TBG_CNTRL_1, reg); reg_write(priv, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1)); reg_set(priv, REG_TX33, TX33_HDMI);