Hi Andy,
Am Dienstag, den 02.12.2014, 15:42 +0800 schrieb Andy Yan:
diff --git a/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt new file mode 100644 index 0000000..107c1ca --- /dev/null +++ b/Documentation/devicetree/bindings/drm/bridge/dw_hdmi.txt @@ -0,0 +1,40 @@ +DesignWare HDMI bridge bindings
+Required properities: +- compatible: platform specific such as:
- "fsl,imx6q-hdmi"
- "fsl,imx6dl-hdmi"
- "rockchip,rk3288-dw-hdmi"
I think we should add a common compatible value "snps,dw-hdmi-tx" here:
compatible = "fsl,imx6q-hdmi", "snps,dw-hdmi-tx";
+- reg: Physical base address and length of the controller's registers. +- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
Better make ddc-i2c-bus optional, see the other thread about the ddc i2c master.
+- interrupts: The HDMI interrupt number
+Optional properties +- reg-io-width: the width of the reg:1,4, default set to 1 if not present
+Example:
- hdmi: hdmi@0120000 {
compatible = "fsl,imx6q-hdmi";reg = <0x00120000 0x9000>;interrupts = <0 115 0x04>;gpr = <&gpr>;clocks = <&clks 123>, <&clks 124>;clock-names = "iahb", "isfr";ddc-i2c-bus = <&i2c2>;port@0 {reg = <0>;hdmi_mux_0: endpoint {remote-endpoint = <&ipu1_di0_hdmi>;};};port@1 {reg = <1>;hdmi_mux_1: endpoint {remote-endpoint = <&ipu1_di1_hdmi>;};};- };
regards Philipp