Hi Paul,
On Fri, Jun 25, 2021 at 01:10:44PM +0100, Paul Cercueil wrote:
Add binding for the Innolux EJ030NA panel, which is a 320x480 3.0" 4:3 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit interface.
Signed-off-by: Paul Cercueil paul@crapouillou.net
.../display/panel/innolux,ej030na.yaml | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml new file mode 100644 index 000000000000..cda36c04e85c --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,ej030na.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,ej030na.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#
+title: Innolux EJ030NA 3.0" (320x480 pixels) 24-bit TFT LCD panel
+description: |
- The panel must obey the rules for a SPI slave device as specified in
- spi/spi-controller.yaml
+maintainers:
- Paul Cercueil paul@crapouillou.net
+allOf:
- $ref: panel-common.yaml#
+properties:
- compatible:
- const: innolux,ej030na
- backlight: true
- port: true
- power-supply: true
- reg: true
- reset-gpios: true
+required:
- compatible
- reg
- power-supply
- reset-gpios
+unevaluatedProperties: false
I had expected: additionalProperties: false
With this fixed: Reviewed-by: Sam Ravnborg sam@ravnborg.org
+examples:
- |
- #include <dt-bindings/gpio/gpio.h>
- spi {
#address-cells = <1>;#size-cells = <0>;panel@0 {compatible = "innolux,ej030na";reg = <0>;spi-max-frequency = <10000000>;reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>;power-supply = <&lcd_power>;backlight = <&backlight>;port {panel_input: endpoint {remote-endpoint = <&panel_output>;};};};- };
-- 2.30.2