Add 'bus-type' and 'data-lanes' define for port0. Define DP tx lane0, lane1 swing register array define, and audio enable flag.
Signed-off-by: Xin Ji xji@analogixsemi.com --- .../bindings/display/bridge/analogix,anx7625.yaml | 58 +++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index c789784..3f54d58 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -34,6 +34,26 @@ properties: description: used for reset chip control, RESET_N pin B7. maxItems: 1
+ analogix,lane0-swing: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane0 PHY, please don't + add this property, or contact vendor. + + analogix,lane1-swing: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 20 + description: + an array of swing register setting for DP tx lane1 PHY, please don't + add this property, or contact vendor. + + analogix,audio-enable: + type: boolean + description: let the driver enable audio HDMI codec function or not. + ports: $ref: /schemas/graph.yaml#/properties/ports
@@ -41,13 +61,43 @@ properties: port@0: $ref: /schemas/graph.yaml#/properties/port description: - Video port for MIPI DSI input. + MIPI DSI/DPI input. + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + type: object + additionalProperties: false + + properties: + remote-endpoint: true + bus-type: true + data-lanes: true + + required: + - remote-endpoint + + required: + - endpoint +
port@1: $ref: /schemas/graph.yaml#/properties/port description: Video port for panel or connector.
+ properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + type: object + additionalProperties: false + + properties: + remote-endpoint: true + + required: + - remote-endpoint + required: - port@0 - port@1 @@ -73,6 +123,10 @@ examples: enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>;
+ analogix,audio-enable; + analogix,lane0-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>; + analogix,lane1-swing = <0x14 0x54 0x64 0x74 0x29 0x7b 0x77 0x5b>; + ports { #address-cells = <1>; #size-cells = <0>; @@ -81,6 +135,8 @@ examples: reg = <0>; anx7625_in: endpoint { remote-endpoint = <&mipi_dsi>; + bus-type = <5>; + data-lanes = <0 1 2 3>; }; };