Hi all,
This patch series optimizes console operations on ssd1307fb, after the customary fixes and cleanups.
Currently, each screen update triggers an I2C transfer of all screen data, up to 1 KiB of data for a 128x64 display, which takes at least 20 ms in Fast mode. While many displays are smaller, and thus require less data to be transferred, 20 ms is still an optimistic value, as the actual data transfer may be much slower, especially on bitbanged I2C drivers. After this series, the amount of data transfer is reduced, as fillrect, copyarea, and imageblit only update the rectangle that changed.
This has been tested on an Adafruit FeatherWing OLED with an SSD1306 controller and a 128x32 OLED, connected to an OrangeCrab ECP5 FPGA board running a 64 MHz VexRiscv RISC-V softcore, where it reduced the CPU usage for blinking the cursor from more than 70% to ca. 10%.
Thanks for your comments!
Geert Uytterhoeven (5): video: fbdev: ssd1307fb: Propagate errors via ssd1307fb_update_display() video: fbdev: ssd1307fb: Simplify ssd1307fb_update_display() video: fbdev: ssd1307fb: Extract ssd1307fb_set_address_range() video: fbdev: ssd1307fb: Optimize screen updates video: fbdev: ssd1307fb: Cache address ranges
drivers/video/fbdev/ssd1307fb.c | 143 +++++++++++++++++++++----------- 1 file changed, 96 insertions(+), 47 deletions(-)