This patch adds device tree bindings for Himax HX8369A DRM panel driver.
Signed-off-by: Liu Ying Ying.Liu@freescale.com --- v5->v6: * None.
v4->v5: * Merge the bs[3:0]-gpios properties into one property - bs-gpios. This addresses Andrzej Hajda's comment.
v3->v4: * Newly introduced in v4. This is separated from the relevant driver patch in v3 to address Stefan Wahren's comment.
.../devicetree/bindings/panel/himax,hx8369a.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/himax,hx8369a.txt
diff --git a/Documentation/devicetree/bindings/panel/himax,hx8369a.txt b/Documentation/devicetree/bindings/panel/himax,hx8369a.txt new file mode 100644 index 0000000..3a44b70 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/himax,hx8369a.txt @@ -0,0 +1,39 @@ +Himax HX8369A WVGA 16.7M color TFT single chip driver with internal GRAM + +Himax HX8369A is a WVGA resolution driving controller. +It is designed to provide a single chip solution that combines a source +driver and power supply circuits to drive a TFT dot matrix LCD with +480RGBx864 dots at the maximum. + +The HX8369A supports several interface modes, including MPU MIPI DBI Type +A/B mode, MIPI DPI/DBI Type C mode, MIPI DSI video mode, MIPI DSI command +mode and MDDI mode. The interface mode is selected by the external hardware +pins BS[3:0]. + +Currently, only the MIPI DSI video mode is supported. + +Required properties: + - compatible: should be a panel's compatible string + - reg: the virtual channel number of a DSI peripheral, as described in [1] + - reset-gpios: a GPIO spec for the reset pin, as described in [2] + +Optional properties: + - vdd1-supply: I/O and interface power supply + - vdd2-supply: analog power supply + - vdd3-supply: logic power supply + - dsi-vcc-supply: DSI and MDDI power supply + - vpp-supply: OTP programming voltage + - bs-gpios: a GPIO spec for the pins BS[3:0], as described in [2] + +[1] Documentation/devicetree/bindings/mipi/dsi/mipi-dsi-bus.txt +[2] Documentation/devicetree/bindings/gpio/gpio.txt + +Example: + panel { + compatible = "truly,tft480800-16-e-dsi"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mipi_panel>; + reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>; + bs-gpios = <0>, <0>, <&gpio6 14 GPIO_ACTIVE_HIGH>, <0>; + };