On some BYT PLatform the PWM is controlled using CRC PMIC. Add a lookup entry for the same to be used by the consumer (Intel GFX)
CC: Samuel Ortiz sameo@linux.intel.com Cc: Linus Walleij linus.walleij@linaro.org Cc: Alexandre Courbot gnurou@gmail.com Cc: Thierry Reding thierry.reding@gmail.com Acked-by: Lee Jones lee.jones@linaro.org Tested-by: Ville Syrjälä ville.syrjala@linux.intel.com Signed-off-by: Shobhit Kumar shobhit.kumar@intel.com --- v2: Remove the lookup table on driver unload (Thierry)
v3: Correct the subject line (Lee jones)
drivers/mfd/intel_soc_pmic_core.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c index f3d918e..a00ddd9 100644 --- a/drivers/mfd/intel_soc_pmic_core.c +++ b/drivers/mfd/intel_soc_pmic_core.c @@ -25,6 +25,7 @@ #include <linux/regmap.h> #include <linux/mfd/intel_soc_pmic.h> #include <linux/gpio/machine.h> +#include <linux/pwm.h> #include "intel_soc_pmic_core.h"
/* Lookup table for the Panel Enable/Disable line as GPIO signals */ @@ -37,6 +38,11 @@ static struct gpiod_lookup_table panel_gpio_table = { }, };
+/* PWM consumed by the Intel GFX */ +static struct pwm_lookup crc_pwm_lookup[] = { + PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL), +}; + static int intel_soc_pmic_find_gpio_irq(struct device *dev) { struct gpio_desc *desc; @@ -99,6 +105,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c, /* Add lookup table binding for Panel Control to the GPIO Chip */ gpiod_add_lookup_table(&panel_gpio_table);
+ /* Add lookup table for crc-pwm */ + pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); + ret = mfd_add_devices(dev, -1, config->cell_dev, config->n_cell_devs, NULL, 0, regmap_irq_get_domain(pmic->irq_chip_data)); @@ -121,6 +130,9 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c) /* Remove lookup table for Panel Control from the GPIO Chip */ gpiod_remove_lookup_table(&panel_gpio_table);
+ /* remove crc-pwm lookup table */ + pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup)); + mfd_remove_devices(&i2c->dev);
return 0;