From: Subbaraman Narayanamurthy subbaram@codeaurora.org
PM8150L WLED supports the following: - Two modulators and each sink can use any of the modulator - Multiple CABC selection options from which one can be selected/enabled - Multiple brightness width selection (12 bits to 15 bits)
Signed-off-by: Subbaraman Narayanamurthy subbaram@codeaurora.org Signed-off-by: Kiran Gunda kgunda@codeaurora.org --- drivers/video/backlight/qcom-wled.c | 378 +++++++++++++++++++++++++++++++++++- 1 file changed, 376 insertions(+), 2 deletions(-)
diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c index 7b0095e..c25c311 100644 --- a/drivers/video/backlight/qcom-wled.c +++ b/drivers/video/backlight/qcom-wled.c @@ -15,16 +15,21 @@
/* From DT binding */ #define WLED_MAX_STRINGS 4 +#define MOD_A 0 +#define MOD_B 1
#define WLED_DEFAULT_BRIGHTNESS 2048 #define WLED_SOFT_START_DLY_US 10000 #define WLED3_SINK_REG_BRIGHT_MAX 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_12B 0xFFF +#define WLED5_SINK_REG_BRIGHT_MAX_15B 0x7FFF
/* WLED3/WLED4 control registers */ #define WLED3_CTRL_REG_FAULT_STATUS 0x08 #define WLED3_CTRL_REG_ILIM_FAULT_BIT BIT(0) #define WLED3_CTRL_REG_OVP_FAULT_BIT BIT(1) #define WLED4_CTRL_REG_SC_FAULT_BIT BIT(2) +#define WLED5_CTRL_REG_OVP_PRE_ALARM_BIT BIT(4)
#define WLED3_CTRL_REG_INT_RT_STS 0x10 #define WLED3_CTRL_REG_OVP_FAULT_STATUS BIT(1) @@ -40,6 +45,7 @@
#define WLED3_CTRL_REG_OVP 0x4d #define WLED3_CTRL_REG_OVP_MASK GENMASK(1, 0) +#define WLED5_CTRL_REG_OVP_MASK GENMASK(3, 0)
#define WLED3_CTRL_REG_ILIMIT 0x4e #define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0) @@ -101,6 +107,44 @@
#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10))
+/* WLED5 specific control registers */ +#define WLED5_CTRL_REG_OVP_INT_CTL 0x5f +#define WLED5_CTRL_REG_OVP_INT_TIMER_MASK GENMASK(2, 0) + +/* WLED5 specific sink registers */ +#define WLED5_SINK_REG_MOD_A_EN 0x50 +#define WLED5_SINK_REG_MOD_B_EN 0x60 +#define WLED5_SINK_REG_MOD_EN_MASK BIT(7) + +#define WLED5_SINK_REG_MOD_A_SRC_SEL 0x51 +#define WLED5_SINK_REG_MOD_B_SRC_SEL 0x61 +#define WLED5_SINK_REG_MOD_SRC_SEL_HIGH 0 +#define WLED5_SINK_REG_MOD_SRC_SEL_EXT 0x03 +#define WLED5_SINK_REG_MOD_SRC_SEL_MASK GENMASK(1, 0) + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL 0x52 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL 0x62 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B 0 +#define WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B 1 + +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB 0x53 +#define WLED5_SINK_REG_MOD_A_BRIGHTNESS_MSB 0x54 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB 0x63 +#define WLED5_SINK_REG_MOD_B_BRIGHTNESS_MSB 0x64 + +#define WLED5_SINK_REG_MOD_SYNC_BIT 0x65 +#define WLED5_SINK_REG_SYNC_MOD_A_BIT BIT(0) +#define WLED5_SINK_REG_SYNC_MOD_B_BIT BIT(1) +#define WLED5_SINK_REG_SYNC_MASK GENMASK(1, 0) + +/* WLED5 specific per-'string' registers below */ +#define WLED5_SINK_REG_STR_FULL_SCALE_CURR(n) (0x72 + (n * 0x10)) + +#define WLED5_SINK_REG_STR_SRC_SEL(n) (0x73 + (n * 0x10)) +#define WLED5_SINK_REG_SRC_SEL_MOD_A 0 +#define WLED5_SINK_REG_SRC_SEL_MOD_B 1 +#define WLED5_SINK_REG_SRC_SEL_MASK GENMASK(1, 0) + struct wled_var_cfg { const u32 *values; u32 (*fn)(u32); @@ -125,6 +169,8 @@ struct wled_config { u32 num_strings; u32 string_i_limit; u32 enabled_strings[WLED_MAX_STRINGS]; + u32 mod_sel; + u32 cabc_sel; bool cs_out_en; bool ext_gen; bool cabc; @@ -150,6 +196,7 @@ struct wled { u32 version; bool disabled_by_short; bool has_short_detect; + bool cabc_disabled; int short_irq; int ovp_irq;
@@ -222,6 +269,28 @@ static int wled4_set_brightness(struct wled *wled, u16 brightness) return 0; }
+static int wled5_set_brightness(struct wled *wled, u16 brightness) +{ + int rc, offset; + u16 low_limit = wled->max_brightness * 1 / 1000; + u8 v[2]; + + /* WLED5's lower limit is 0.1% */ + if (brightness < low_limit) + brightness = low_limit; + + v[0] = brightness & 0xff; + v[1] = (brightness >> 8) & 0x7f; + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_LSB : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_LSB; + + rc = regmap_bulk_write(wled->regmap, wled->sink_addr + offset, + v, 2); + return rc; +} + static void wled_ovp_work(struct work_struct *work) { struct wled *wled = container_of(work, @@ -279,6 +348,24 @@ static int wled3_sync_toggle(struct wled *wled) return rc; }
+static int wled5_sync_toggle(struct wled *wled) +{ + int rc; + u8 val; + + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_SYNC_MOD_A_BIT : + WLED5_SINK_REG_SYNC_MOD_B_BIT; + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, val); + if (rc < 0) + return rc; + + return regmap_update_bits(wled->regmap, + wled->sink_addr + WLED5_SINK_REG_MOD_SYNC_BIT, + WLED5_SINK_REG_SYNC_MASK, 0); +} + static int wled_ovp_fault_status(struct wled *wled, bool *fault_set) { int rc; @@ -304,7 +391,11 @@ static int wled_ovp_fault_status(struct wled *wled, bool *fault_set) if (int_rt_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS) *fault_set = true;
- if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) + if (wled->version == 4 && (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT)) + *fault_set = true; + + if (wled->version == 5 && (fault_sts & (WLED3_CTRL_REG_OVP_FAULT_BIT | + WLED5_CTRL_REG_OVP_PRE_ALARM_BIT))) *fault_set = true;
if (*fault_set) @@ -319,6 +410,26 @@ static int wled4_ovp_delay(struct wled *wled) return WLED_SOFT_START_DLY_US; }
+static int wled5_ovp_delay(struct wled *wled) +{ + int rc, delay_us; + u32 val; + u8 ovp_timer_ms[8] = {1, 2, 4, 8, 12, 16, 20, 24}; + + /* For WLED5, get the delay based on OVP timer */ + rc = regmap_read(wled->regmap, wled->ctrl_addr + + WLED5_CTRL_REG_OVP_INT_CTL, &val); + if (rc < 0) + delay_us = + ovp_timer_ms[val & WLED5_CTRL_REG_OVP_INT_TIMER_MASK] * 1000; + else + delay_us = 2 * WLED_SOFT_START_DLY_US; + + dev_dbg(wled->dev, "delay_time_us: %d\n", delay_us); + + return delay_us; +} + static int wled_update_status(struct backlight_device *bl) { struct wled *wled = bl_get_data(bl); @@ -381,6 +492,31 @@ static int wled4_cabc_config(struct wled *wled, bool enable) return 0; }
+static int wled5_cabc_config(struct wled *wled, bool enable) +{ + int rc, offset; + u8 reg; + + if (wled->cabc_disabled) + return 0; + + reg = enable ? wled->cfg.cabc_sel : 0; + offset = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_A_SRC_SEL : + WLED5_SINK_REG_MOD_B_SRC_SEL; + + rc = regmap_update_bits(wled->regmap, wled->sink_addr + offset, + WLED5_SINK_REG_MOD_SRC_SEL_MASK, reg); + if (rc < 0) { + pr_err("Error in configuring CABC rc=%d\n", rc); + return rc; + } + + if (!wled->cfg.cabc_sel) + wled->cabc_disabled = true; + + return 0; +} + #define WLED_SHORT_DLY_MS 20 #define WLED_SHORT_CNT_MAX 5 #define WLED_SHORT_RESET_CNT_DLY_US USEC_PER_SEC @@ -646,6 +782,23 @@ static bool wled4_auto_detection_required(struct wled *wled) return false; }
+static bool wled5_auto_detection_required(struct wled *wled) +{ + if (!wled->cfg.auto_detection_enabled) + return false; + + /* + * Unlike WLED4, WLED5 has OVP fault density interrupt configuration + * i.e. to count the number of OVP alarms for a certain duration before + * triggering OVP fault interrupt. By default, number of OVP fault + * events counted before an interrupt is fired is 32 and the time + * interval is 12 ms. If we see one OVP fault interrupt, then that + * should qualify for a real OVP fault condition to run auto detection + * algorithm. + */ + return true; +} + static int wled_auto_detection_at_init(struct wled *wled) { int rc; @@ -921,6 +1074,119 @@ static const struct wled_config wled4_config_defaults = { .auto_detection_enabled = false, };
+static int wled5_setup(struct wled *wled) +{ + int rc, temp, i, j, offset; + u8 sink_en = 0; + u16 addr; + u32 val; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_OVP, + WLED5_CTRL_REG_OVP_MASK, wled->cfg.ovp); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT, + WLED3_CTRL_REG_ILIMIT_MASK, + wled->cfg.boost_i_limit); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->ctrl_addr + WLED3_CTRL_REG_FREQ, + WLED3_CTRL_REG_FREQ_MASK, + wled->cfg.switch_freq); + if (rc < 0) + return rc; + + /* Per sink/string configuration */ + for (i = 0; i < wled->cfg.num_strings; ++i) { + j = wled->cfg.enabled_strings[i]; + addr = wled->sink_addr + + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK, + wled->cfg.string_i_limit); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_STR_SRC_SEL(j); + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_SRC_SEL_MASK, + wled->cfg.mod_sel == MOD_A ? + WLED5_SINK_REG_SRC_SEL_MOD_A : + WLED5_SINK_REG_SRC_SEL_MOD_B); + + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT; + sink_en |= 1 << temp; + } + + rc = wled5_cabc_config(wled, wled->cfg.cabc_sel ? true : false); + if (rc < 0) + return rc; + + /* Enable one of the modulators A or B based on mod_sel */ + addr = wled->sink_addr + WLED5_SINK_REG_MOD_A_EN; + val = (wled->cfg.mod_sel == MOD_A) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + addr = wled->sink_addr + WLED5_SINK_REG_MOD_B_EN; + val = (wled->cfg.mod_sel == MOD_B) ? WLED5_SINK_REG_MOD_EN_MASK : 0; + rc = regmap_update_bits(wled->regmap, addr, + WLED5_SINK_REG_MOD_EN_MASK, val); + if (rc < 0) + return rc; + + offset = (wled->cfg.mod_sel == MOD_A) ? + WLED5_SINK_REG_MOD_A_BRIGHTNESS_WIDTH_SEL : + WLED5_SINK_REG_MOD_B_BRIGHTNESS_WIDTH_SEL; + + addr = wled->sink_addr + offset; + val = (wled->max_brightness == WLED5_SINK_REG_BRIGHT_MAX_15B) ? + WLED5_SINK_REG_BRIGHTNESS_WIDTH_15B : + WLED5_SINK_REG_BRIGHTNESS_WIDTH_12B; + rc = regmap_write(wled->regmap, addr, val); + if (rc < 0) + return rc; + + rc = regmap_update_bits(wled->regmap, + wled->sink_addr + WLED4_SINK_REG_CURR_SINK, + WLED4_SINK_REG_CURR_SINK_MASK, sink_en); + if (rc < 0) + return rc; + + /* This updates only FSC configuration in WLED5 */ + rc = wled->wled_sync_toggle(wled); + if (rc < 0) { + pr_err("Failed to toggle sync reg rc:%d\n", rc); + return rc; + } + + rc = wled_auto_detection_at_init(wled); + if (rc < 0) + return rc; + + return 0; +} + +static const struct wled_config wled5_config_defaults = { + .boost_i_limit = 5, + .string_i_limit = 10, + .ovp = 4, + .num_strings = 4, + .switch_freq = 11, + .mod_sel = 0, + .cabc_sel = 0, + .cabc = false, + .external_pfet = false, + .auto_detection_enabled = false, +}; + static const u32 wled3_boost_i_limit_values[] = { 105, 385, 525, 805, 980, 1260, 1400, 1680, }; @@ -939,6 +1205,16 @@ static const struct wled_var_cfg wled4_boost_i_limit_cfg = { .size = ARRAY_SIZE(wled4_boost_i_limit_values), };
+static inline u32 wled5_boost_i_limit_values_fn(u32 idx) +{ + return 525 + (idx * 175); +} + +static const struct wled_var_cfg wled5_boost_i_limit_cfg = { + .fn = wled5_boost_i_limit_values_fn, + .size = 8, +}; + static const u32 wled3_ovp_values[] = { 35, 32, 29, 27, }; @@ -957,6 +1233,21 @@ static const struct wled_var_cfg wled4_ovp_cfg = { .size = ARRAY_SIZE(wled4_ovp_values), };
+static inline u32 wled5_ovp_values_fn(u32 idx) +{ + /* + * 0000 - 38.5 V + * 0001 - 37 V .. + * 1111 - 16 V + */ + return 38500 - (idx * 1500); +} + +static const struct wled_var_cfg wled5_ovp_cfg = { + .fn = wled5_ovp_values_fn, + .size = 16, +}; + static u32 wled3_num_strings_values_fn(u32 idx) { return idx + 1; @@ -996,6 +1287,14 @@ static const struct wled_var_cfg wled4_string_i_limit_cfg = { .size = ARRAY_SIZE(wled4_string_i_limit_values), };
+static const struct wled_var_cfg wled5_mod_sel_cfg = { + .size = 2, +}; + +static const struct wled_var_cfg wled5_cabc_sel_cfg = { + .size = 4, +}; + static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx) { if (idx >= cfg->size) @@ -1072,6 +1371,44 @@ static int wled_configure(struct wled *wled) }, };
+ const struct wled_u32_opts wled5_opts[] = { + { + .name = "qcom,current-boost-limit", + .val_ptr = &cfg->boost_i_limit, + .cfg = &wled5_boost_i_limit_cfg, + }, + { + .name = "qcom,current-limit-microamp", + .val_ptr = &cfg->string_i_limit, + .cfg = &wled4_string_i_limit_cfg, + }, + { + .name = "qcom,ovp-millivolt", + .val_ptr = &cfg->ovp, + .cfg = &wled5_ovp_cfg, + }, + { + .name = "qcom,switching-freq", + .val_ptr = &cfg->switch_freq, + .cfg = &wled3_switch_freq_cfg, + }, + { + .name = "qcom,num-strings", + .val_ptr = &cfg->num_strings, + .cfg = &wled4_num_strings_cfg, + }, + { + .name = "qcom,modulator-sel", + .val_ptr = &cfg->mod_sel, + .cfg = &wled5_mod_sel_cfg, + }, + { + .name = "qcom,cabc-sel", + .val_ptr = &cfg->cabc_sel, + .cfg = &wled5_cabc_sel_cfg, + }, + }; + const struct wled_bool_opts bool_opts[] = { { "qcom,cs-out", &cfg->cs_out_en, }, { "qcom,ext-gen", &cfg->ext_gen, }, @@ -1122,6 +1459,26 @@ static int wled_configure(struct wled *wled) wled->sink_addr = be32_to_cpu(*prop_addr); break;
+ case 5: + u32_opts = wled5_opts; + size = ARRAY_SIZE(wled5_opts); + *cfg = wled5_config_defaults; + wled->wled_set_brightness = wled5_set_brightness; + wled->wled_sync_toggle = wled5_sync_toggle; + wled->wled_cabc_config = wled5_cabc_config; + wled->wled_ovp_delay = wled5_ovp_delay; + wled->wled_auto_detection_required = + wled5_auto_detection_required; + wled->max_string_count = 4; + + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL); + if (!prop_addr) { + dev_err(wled->dev, "invalid IO resources\n"); + return -EINVAL; + } + wled->sink_addr = be32_to_cpu(*prop_addr); + break; + default: dev_err(wled->dev, "Invalid WLED version\n"); return -EINVAL; @@ -1275,6 +1632,10 @@ static int wled_probe(struct platform_device *pdev) if (rc) return rc;
+ val = WLED3_SINK_REG_BRIGHT_MAX; + of_property_read_u32(pdev->dev.of_node, "max-brightness", &val); + wled->max_brightness = val; + switch (wled->version) { case 3: wled->cfg.auto_detection_enabled = false; @@ -1294,6 +1655,18 @@ static int wled_probe(struct platform_device *pdev) } break;
+ case 5: + wled->has_short_detect = true; + if (wled->cfg.cabc_sel) + wled->max_brightness = WLED5_SINK_REG_BRIGHT_MAX_12B; + + rc = wled5_setup(wled); + if (rc) { + dev_err(&pdev->dev, "wled5_setup failed\n"); + return rc; + } + break; + default: dev_err(wled->dev, "Invalid WLED version\n"); break; @@ -1315,7 +1688,7 @@ static int wled_probe(struct platform_device *pdev) memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_RAW; props.brightness = val; - props.max_brightness = WLED3_SINK_REG_BRIGHT_MAX; + props.max_brightness = wled->max_brightness; bl = devm_backlight_device_register(&pdev->dev, wled->name, &pdev->dev, wled, &wled_ops, &props); @@ -1338,6 +1711,7 @@ static const struct of_device_id wled_match_table[] = { { .compatible = "qcom,pm8941-wled", .data = (void *)3 }, { .compatible = "qcom,pmi8998-wled", .data = (void *)4 }, { .compatible = "qcom,pm660l-wled", .data = (void *)4 }, + { .compatible = "qcom,pm8150l-wled", .data = (void *)5 }, {} }; MODULE_DEVICE_TABLE(of, wled_match_table);