On Fri, 06 May 2022 15:05:32 +0100, Andre Przywara wrote:
The Arm Mali Display Processor (DP) 5xx/6xx is a series of IP that scans out a framebuffer and hands the pixels over to a digital signal encoder. It supports multiple layers, scaling and rotation.
Convert the existing DT binding to DT schema.
Signed-off-by: Andre Przywara andre.przywara@arm.com
.../bindings/display/arm,malidp.txt | 68 ---------- .../bindings/display/arm,malidp.yaml | 116 ++++++++++++++++++ 2 files changed, 116 insertions(+), 68 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/arm,malidp.txt create mode 100644 Documentation/devicetree/bindings/display/arm,malidp.yaml
Running 'make dtbs_check' with the schema in this patch gives the following warnings. Consider if they are expected or the schema is incorrect. These may not be new warnings.
Note that it is not yet a requirement to have 0 warnings for dtbs_check. This will change in the future.
Full log is available here: https://patchwork.ozlabs.org/patch/
display@f080000: 'arm,malidp-arqos-value' does not match any of the regexes: 'pinctrl-[0-9]+' arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-kbox-a-230-ls.dtb arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dtb arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dtb arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dtb arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dtb arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dtb arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dtb arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dtb