Restore the assgined-clocks and assigned-clock-parents properties that were lost during the txt -> YAML conversion.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org --- .../display/msm/dsi-controller-main.yaml | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml index 76348b71f736..760eec6b0db1 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml +++ b/Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml @@ -64,6 +64,18 @@ properties: Indicates if the DSI controller is driving a panel which needs 2 DSI links.
+ assigned-clocks: + minItems: 2 + maxItems: 2 + description: | + Parents of "byte" and "pixel" for the given platform. + + assigned-clock-parents: + minItems: 2 + maxItems: 2 + description: | + The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. + power-domains: maxItems: 1
@@ -119,6 +131,8 @@ required: - clock-names - phys - phy-names + - assigned-clocks + - assigned-clock-parents - power-domains - operating-points-v2 - ports @@ -159,6 +173,9 @@ examples: phys = <&dsi0_phy>; phy-names = "dsi";
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy 0>, <&dsi_phy 1>; + power-domains = <&rpmhpd SC7180_CX>; operating-points-v2 = <&dsi_opp_table>;