Hi Hans,
On 19/03/2018 12:43, Hans Verkuil wrote:
From: Hans Verkuil hans.verkuil@cisco.com
Some boards (amlogic) have two CEC controllers: the DesignWare controller and their own CEC controller (meson ao-cec).
Since the CEC line is not hooked up to the DW controller we need a way to disable that controller. This patch series adds the cec-disable property for that purpose.
Neil, I have added cec-disable to meson-gxl-s905x-libretech-cc.dts only, but I suspect it is probably valid for all meson-glx devices? Should I move it to meson-gxl.dtsi?
It's valid on all GX devices, so you can add to meson-gx.dtsi
Neil
Regards,
Hans
Hans Verkuil (3): dt-bindings: display: dw_hdmi.txt drm: bridge: dw-hdmi: check the cec-disable property arm64: dts: meson-gxl-s905x-libretech-cc: add cec-disable
Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt | 3 +++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts | 1 + drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 3 ++- 3 files changed, 6 insertions(+), 1 deletion(-)