Hi Icenowy,
On Wed, Jul 01, 2020 at 08:01:14PM +0800, Icenowy Zheng wrote:
于 2020年7月1日 GMT+08:00 下午6:31:26, Ondrej Jirman megous@megous.com 写到:
Pinephone has a Goodix GT917S capacitive touchscreen controller on I2C0 bus. Add support for it.
Signed-off-by: Ondrej Jirman megous@megous.com Acked-by: Linus Walleij linus.walleij@linaro.org
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 85a7aa5efd32..2d5694446d17 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -123,6 +123,25 @@ &ehci1 { status = "okay"; };
+&i2c0 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
- touchscreen@5d {
compatible = "goodix,gt917s", "goodix,gt911";Please drop gt911 here. GT917S belong to the GT1x product line, not the same line with GT911.
You will see this in the driver.
Right. I'll do so in v8.
thnk you and regards, o.
reg = <0x5d>;interrupt-parent = <&pio>;interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */AVDD28-supply = <®_ldo_io0>;VDDIO-supply = <®_ldo_io0>;touchscreen-size-x = <720>;touchscreen-size-y = <1440>;- };
+};
&i2c1 { status = "okay";