Support reading edid through aux channel if panel is connected to aux bus. Extend anx7625_aux_dpcd_trans() to implement aux transfer function:
1. panel is populated in devm_of_dp_aux_populate_ep_devices(), so move anx7625_parse_dt() after. 2. Use pm runtime autosuspend since aux transfer function is called multiple times when reading edid. 3. No-op if aux transfer length is 0.
Signed-off-by: Hsin-Yi Wang hsinyi@chromium.org Reviewed-by: Xin Ji xji@analogixsemi.com --- v3->v4: rebase to latest drm-misc-next --- drivers/gpu/drm/bridge/analogix/anx7625.c | 120 ++++++++++++++++++---- drivers/gpu/drm/bridge/analogix/anx7625.h | 1 + 2 files changed, 103 insertions(+), 18 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index b7e3373994b480..50b9c98277f0d7 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -24,6 +24,7 @@ #include <drm/drm_atomic_helper.h> #include <drm/drm_bridge.h> #include <drm/drm_crtc_helper.h> +#include <drm/drm_dp_aux_bus.h> #include <drm/dp/drm_dp_helper.h> #include <drm/drm_edid.h> #include <drm/drm_hdcp.h> @@ -231,19 +232,23 @@ static int wait_aux_op_finish(struct anx7625_data *ctx) return 0; }
-static int anx7625_aux_dpcd_trans(struct anx7625_data *ctx, u8 op, - u32 address, u8 len, u8 *buf) +static int anx7625_aux_trans(struct anx7625_data *ctx, u8 op, u32 address, + u8 len, u8 *buf) { struct device *dev = &ctx->client->dev; int ret; u8 addrh, addrm, addrl; u8 cmd; + bool is_write = !(op & DP_AUX_I2C_READ);
- if (len > MAX_DPCD_BUFFER_SIZE) { + if (len > DP_AUX_MAX_PAYLOAD_BYTES) { dev_err(dev, "exceed aux buffer len.\n"); return -EINVAL; }
+ if (!len) + return len; + addrl = address & 0xFF; addrm = (address >> 8) & 0xFF; addrh = (address >> 16) & 0xFF; @@ -262,7 +267,7 @@ static int anx7625_aux_dpcd_trans(struct anx7625_data *ctx, u8 op, ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client, AP_AUX_ADDR_19_16, addrh);
- if (op == DP_AUX_NATIVE_WRITE) + if (is_write) ret |= anx7625_reg_block_write(ctx, ctx->i2c.rx_p0_client, AP_AUX_BUFF_START, len, buf); /* Enable aux access */ @@ -275,14 +280,14 @@ static int anx7625_aux_dpcd_trans(struct anx7625_data *ctx, u8 op, }
ret = wait_aux_op_finish(ctx); - if (ret) { + if (ret < 0) { dev_err(dev, "aux IO error: wait aux op finish.\n"); return ret; }
/* Write done */ - if (op == DP_AUX_NATIVE_WRITE) - return 0; + if (is_write) + return len;
/* Read done, read out dpcd data */ ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client, @@ -292,7 +297,7 @@ static int anx7625_aux_dpcd_trans(struct anx7625_data *ctx, u8 op, return -EIO; }
- return 0; + return len; }
static int anx7625_video_mute_control(struct anx7625_data *ctx, @@ -867,7 +872,7 @@ static int anx7625_hdcp_enable(struct anx7625_data *ctx) }
/* Read downstream capability */ - anx7625_aux_dpcd_trans(ctx, DP_AUX_NATIVE_READ, 0x68028, 1, &bcap); + anx7625_aux_trans(ctx, DP_AUX_NATIVE_READ, 0x68028, 1, &bcap); if (!(bcap & 0x01)) { pr_warn("downstream not support HDCP 1.4, cap(%x).\n", bcap); return 0; @@ -956,7 +961,7 @@ static void anx7625_dp_stop(struct anx7625_data *ctx) dev_dbg(dev, "notify downstream enter into standby\n"); /* Downstream monitor enter into standby mode */ data = 2; - ret |= anx7625_aux_dpcd_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data); + ret |= anx7625_aux_trans(ctx, DP_AUX_NATIVE_WRITE, 0x000600, 1, &data); if (ret < 0) DRM_DEV_ERROR(dev, "IO error : mute video fail\n");
@@ -1655,11 +1660,56 @@ static int anx7625_parse_dt(struct device *dev, return 0; }
+static bool anx7625_of_panel_on_aux_bus(struct device *dev) +{ + struct device_node *bus, *panel; + + bus = of_get_child_by_name(dev->of_node, "aux-bus"); + if (!bus) + return false; + + panel = of_get_child_by_name(bus, "panel"); + of_node_put(bus); + if (!panel) + return false; + of_node_put(panel); + + return true; +} + static inline struct anx7625_data *bridge_to_anx7625(struct drm_bridge *bridge) { return container_of(bridge, struct anx7625_data, bridge); }
+static ssize_t anx7625_aux_transfer(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg) +{ + struct anx7625_data *ctx = container_of(aux, struct anx7625_data, aux); + struct device *dev = &ctx->client->dev; + u8 request = msg->request & ~DP_AUX_I2C_MOT; + int ret = 0; + + pm_runtime_get_sync(dev); + msg->reply = 0; + switch (request) { + case DP_AUX_NATIVE_WRITE: + case DP_AUX_I2C_WRITE: + case DP_AUX_NATIVE_READ: + case DP_AUX_I2C_READ: + break; + default: + ret = -EINVAL; + } + if (!ret) + ret = anx7625_aux_trans(ctx, msg->request, msg->address, + msg->size, msg->buffer); + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + static struct edid *anx7625_get_edid(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; @@ -2066,6 +2116,13 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge, return -ENODEV; }
+ ctx->aux.drm_dev = bridge->dev; + err = drm_dp_aux_register(&ctx->aux); + if (err) { + dev_err(dev, "failed to register aux channel: %d\n", err); + return err; + } + if (ctx->pdata.panel_bridge) { err = drm_bridge_attach(bridge->encoder, ctx->pdata.panel_bridge, @@ -2079,6 +2136,13 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge, return 0; }
+static void anx7625_bridge_detach(struct drm_bridge *bridge) +{ + struct anx7625_data *ctx = bridge_to_anx7625(bridge); + + drm_dp_aux_unregister(&ctx->aux); +} + static enum drm_mode_status anx7625_bridge_mode_valid(struct drm_bridge *bridge, const struct drm_display_info *info, @@ -2344,6 +2408,7 @@ static struct edid *anx7625_bridge_get_edid(struct drm_bridge *bridge,
static const struct drm_bridge_funcs anx7625_bridge_funcs = { .attach = anx7625_bridge_attach, + .detach = anx7625_bridge_detach, .mode_valid = anx7625_bridge_mode_valid, .mode_set = anx7625_bridge_mode_set, .atomic_check = anx7625_bridge_atomic_check, @@ -2501,6 +2566,12 @@ static const struct dev_pm_ops anx7625_pm_ops = { anx7625_runtime_pm_resume, NULL) };
+static void anx7625_runtime_disable(void *data) +{ + pm_runtime_dont_use_autosuspend(data); + pm_runtime_disable(data); +} + static int anx7625_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -2523,13 +2594,6 @@ static int anx7625_i2c_probe(struct i2c_client *client,
pdata = &platform->pdata;
- ret = anx7625_parse_dt(dev, pdata); - if (ret) { - if (ret != -EPROBE_DEFER) - DRM_DEV_ERROR(dev, "fail to parse DT : %d\n", ret); - return ret; - } - platform->client = client; i2c_set_clientdata(client, platform);
@@ -2577,6 +2641,19 @@ static int anx7625_i2c_probe(struct i2c_client *client, } }
+ platform->aux.name = "anx7625-aux"; + platform->aux.dev = dev; + platform->aux.transfer = anx7625_aux_transfer; + drm_dp_aux_init(&platform->aux); + devm_of_dp_aux_populate_ep_devices(&platform->aux); + + ret = anx7625_parse_dt(dev, pdata); + if (ret) { + if (ret != -EPROBE_DEFER) + DRM_DEV_ERROR(dev, "fail to parse DT : %d\n", ret); + return ret; + } + if (anx7625_register_i2c_dummy_clients(platform, client) != 0) { ret = -ENOMEM; DRM_DEV_ERROR(dev, "fail to reserve I2C bus.\n"); @@ -2584,6 +2661,12 @@ static int anx7625_i2c_probe(struct i2c_client *client, }
pm_runtime_enable(dev); + pm_runtime_set_autosuspend_delay(dev, 1000); + pm_runtime_use_autosuspend(dev); + pm_suspend_ignore_children(dev, true); + ret = devm_add_action_or_reset(dev, anx7625_runtime_disable, dev); + if (ret) + return ret;
if (!platform->pdata.low_power_mode) { anx7625_disable_pd_protocol(platform); @@ -2596,7 +2679,8 @@ static int anx7625_i2c_probe(struct i2c_client *client,
platform->bridge.funcs = &anx7625_bridge_funcs; platform->bridge.of_node = client->dev.of_node; - platform->bridge.ops = DRM_BRIDGE_OP_EDID; + if (!anx7625_of_panel_on_aux_bus(&client->dev)) + platform->bridge.ops |= DRM_BRIDGE_OP_EDID; if (!platform->pdata.panel_bridge) platform->bridge.ops |= DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_DETECT; diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h index 64a8ab56529404..edbbfe410a56e8 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.h +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h @@ -472,6 +472,7 @@ struct anx7625_data { u8 bridge_attached; struct drm_connector *connector; struct mipi_dsi_device *dsi; + struct drm_dp_aux aux; };
#endif /* __ANX7625_H__ */