From: Hans Verkuil hansverk@cisco.com
Add CEC support to the adv7511 driver.
Signed-off-by: Hans Verkuil hansverk@cisco.com [k.debski@samsung.com: Merged changes from CEC Updates commit by Hans Verkuil] Signed-off-by: Kamil Debski k.debski@samsung.com --- drivers/media/i2c/adv7511.c | 347 ++++++++++++++++++++++++++++++++++++++++++- include/media/adv7511.h | 6 +- 2 files changed, 343 insertions(+), 10 deletions(-)
diff --git a/drivers/media/i2c/adv7511.c b/drivers/media/i2c/adv7511.c index 12d9320..d56e110 100644 --- a/drivers/media/i2c/adv7511.c +++ b/drivers/media/i2c/adv7511.c @@ -33,6 +33,7 @@ #include <media/v4l2-ctrls.h> #include <media/v4l2-dv-timings.h> #include <media/adv7511.h> +#include <media/cec.h>
static int debug; module_param(debug, int, 0644); @@ -91,6 +92,12 @@ struct adv7511_state { int chip_revision; uint8_t i2c_edid_addr; uint8_t i2c_cec_addr; + + struct i2c_client *i2c_cec; + u8 cec_addr[3]; + u8 cec_valid_addrs; + bool cec_enabled_adap; + /* Is the adv7511 powered on? */ bool power_on; /* Did we receive hotplug and rx-sense signals? */ @@ -222,7 +229,7 @@ static int adv_smbus_read_i2c_block_data(struct i2c_client *client, return ret; }
-static inline void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf) +static void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t *buf) { struct adv7511_state *state = get_adv7511_state(sd); int i; @@ -237,6 +244,34 @@ static inline void adv7511_edid_rd(struct v4l2_subdev *sd, uint16_t len, uint8_t v4l2_err(sd, "%s: i2c read error\n", __func__); }
+static inline int cec_read(struct v4l2_subdev *sd, u8 reg) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + return i2c_smbus_read_byte_data(state->i2c_cec, reg); +} + +static int cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{ + struct adv7511_state *state = get_adv7511_state(sd); + int ret; + int i; + + for (i = 0; i < 3; i++) { + ret = i2c_smbus_write_byte_data(state->i2c_cec, reg, val); + if (ret == 0) + return 0; + } + v4l2_err(sd, "%s: I2C Write Problem\n", __func__); + return ret; +} + +static inline int cec_write_and_or(struct v4l2_subdev *sd, u8 reg, u8 mask, + u8 val) +{ + return cec_write(sd, reg, (cec_read(sd, reg) & mask) | val); +} + static inline bool adv7511_have_hotplug(struct v4l2_subdev *sd) { return adv7511_rd(sd, 0x42) & MASK_ADV7511_HPD_DETECT; @@ -381,16 +416,28 @@ static const struct v4l2_ctrl_ops adv7511_ctrl_ops = { #ifdef CONFIG_VIDEO_ADV_DEBUG static void adv7511_inv_register(struct v4l2_subdev *sd) { + struct adv7511_state *state = get_adv7511_state(sd); + v4l2_info(sd, "0x000-0x0ff: Main Map\n"); + if (state->i2c_cec) + v4l2_info(sd, "0x100-0x1ff: CEC Map\n"); }
static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg) { + struct adv7511_state *state = get_adv7511_state(sd); + reg->size = 1; switch (reg->reg >> 8) { case 0: reg->val = adv7511_rd(sd, reg->reg & 0xff); break; + case 1: + if (state->i2c_cec) { + reg->val = cec_read(sd, reg->reg & 0xff); + break; + } + /* fall through */ default: v4l2_info(sd, "Register %03llx not supported\n", reg->reg); adv7511_inv_register(sd); @@ -401,10 +448,18 @@ static int adv7511_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *
static int adv7511_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg) { + struct adv7511_state *state = get_adv7511_state(sd); + switch (reg->reg >> 8) { case 0: adv7511_wr(sd, reg->reg & 0xff, reg->val & 0xff); break; + case 1: + if (state->i2c_cec) { + cec_write(sd, reg->reg & 0xff, reg->val & 0xff); + break; + } + /* fall through */ default: v4l2_info(sd, "Register %03llx not supported\n", reg->reg); adv7511_inv_register(sd); @@ -418,6 +473,7 @@ static int adv7511_log_status(struct v4l2_subdev *sd) { struct adv7511_state *state = get_adv7511_state(sd); struct adv7511_state_edid *edid = &state->edid; + int i;
static const char * const states[] = { "in reset", @@ -486,7 +542,21 @@ static int adv7511_log_status(struct v4l2_subdev *sd) else v4l2_info(sd, "no timings set\n"); v4l2_info(sd, "i2c edid addr: 0x%x\n", state->i2c_edid_addr); + + if (state->i2c_cec == NULL) + return 0; + v4l2_info(sd, "i2c cec addr: 0x%x\n", state->i2c_cec_addr); + + if (cec_read(sd, 0x4e) & 0x01) { + v4l2_info(sd, "cec: enabled\n"); + for (i = 0; i < 3; i++) + if (state->cec_valid_addrs & (1 << i)) + v4l2_info(sd, "cec device %d: addr %d\n", i, + state->cec_addr[i]); + } else { + v4l2_info(sd, "cec: disabled\n"); + } return 0; }
@@ -542,15 +612,136 @@ static int adv7511_s_power(struct v4l2_subdev *sd, int on) return true; }
+static int adv7511_cec_enable(struct v4l2_subdev *sd, bool enable) +{ + struct adv7511_state *state = get_adv7511_state(sd); + + if (!state->cec_enabled_adap && enable) { + /* power up cec section */ + cec_write_and_or(sd, 0x4e, 0xfc, 0x01); + /* legacy mode and clear all rx buffers */ + cec_write(sd, 0x4a, 0x07); + cec_write(sd, 0x4a, 0); + cec_write_and_or(sd, 0x11, 0xfe, 0); /* initially disable tx */ + /* enabled irqs: */ + /* tx: ready */ + /* tx: arbitration lost */ + /* tx: retry timeout */ + /* rx: ready 1 */ + adv7511_wr_and_or(sd, 0x95, 0xc0, 0x39); + } else if (state->cec_enabled_adap && !enable) { + adv7511_wr_and_or(sd, 0x95, 0xc0, 0x00); + /* disable address mask 1-3 */ + cec_write_and_or(sd, 0x4b, 0x8f, 0x00); + /* power down cec section */ + cec_write_and_or(sd, 0x4e, 0xfc, 0x00); + state->cec_valid_addrs = 0; + } + state->cec_enabled_adap = enable; + return 0; +} + +#define ADV7511_MAX_ADDRS 3 + +static int adv7511_cec_log_addr(struct v4l2_subdev *sd, u8 addr) +{ + struct adv7511_state *state = get_adv7511_state(sd); + unsigned i, free_idx = ADV7511_MAX_ADDRS; + + if (!state->cec_enabled_adap) + return -EIO; + + for (i = 0; i < ADV7511_MAX_ADDRS; i++) { + bool is_valid = state->cec_valid_addrs & (1 << i); + + if (free_idx == ADV7511_MAX_ADDRS && !is_valid) + free_idx = i; + if (is_valid && state->cec_addr[i] == addr) + return 0; + } + if (i == ADV7511_MAX_ADDRS) { + i = free_idx; + if (i == ADV7511_MAX_ADDRS) + return -ENXIO; + } + state->cec_addr[i] = addr; + state->cec_valid_addrs |= 1 << i; + + switch (i) { + case 0: + /* enable address mask 0 */ + cec_write_and_or(sd, 0x4b, 0xef, 0x10); + /* set address for mask 0 */ + cec_write_and_or(sd, 0x4c, 0xf0, addr); + break; + case 1: + /* enable address mask 1 */ + cec_write_and_or(sd, 0x4b, 0xdf, 0x20); + /* set address for mask 1 */ + cec_write_and_or(sd, 0x4c, 0x0f, addr << 4); + break; + case 2: + /* enable address mask 2 */ + cec_write_and_or(sd, 0x4b, 0xbf, 0x40); + /* set address for mask 1 */ + cec_write_and_or(sd, 0x4d, 0xf0, addr); + break; + } + return 0; +} + +static int adv7511_cec_transmit(struct v4l2_subdev *sd, struct cec_msg *msg) +{ + u8 len = msg->len; + unsigned i; + + v4l2_dbg(1, debug, sd, "%s: len %d\n", __func__, len); + + if (len > 16) { + v4l2_err(sd, "%s: len exceeded 16 (%d)\n", __func__, len); + return -EINVAL; + } + + /* blocking, clear cec tx irq status */ + adv7511_wr_and_or(sd, 0x97, 0xc7, 0x38); + + /* write data */ + for (i = 0; i < len; i++) + cec_write(sd, i, msg->msg[i]); + + /* set length (data + header) */ + cec_write(sd, 0x10, len); + /* start transmit, enable tx */ + cec_write(sd, 0x11, 0x01); + return 0; +} + +static void adv7511_cec_transmit_timed_out(struct v4l2_subdev *sd) +{ + cec_write_and_or(sd, 0x11, 0xfe, 0); /* disable tx */ +} + /* Enable interrupts */ static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable) { + struct adv7511_state *state = get_adv7511_state(sd); uint8_t irqs = MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT; uint8_t irqs_rd; int retries = 100;
v4l2_dbg(2, debug, sd, "%s: %s\n", __func__, enable ? "enable" : "disable");
+ if (state->i2c_cec) { + /* + * Enabled CEC irqs: + * tx: ready + * tx: arbitration lost + * tx: retry timeout + * rx: ready 1 + */ + adv7511_wr_and_or(sd, 0x95, 0xc0, enable ? 0x39 : 0); + } + /* The datasheet says that the EDID ready interrupt should be disabled if there is no hotplug. */ if (!enable) @@ -576,24 +767,82 @@ static void adv7511_set_isr(struct v4l2_subdev *sd, bool enable) v4l2_err(sd, "Could not set interrupts: hw failure?\n"); }
+static void adv_cec_tx_raw_status(struct v4l2_subdev *sd, u8 tx_raw_status) +{ + if ((cec_read(sd, 0x11) & 0x01) == 0) { + v4l2_dbg(1, debug, sd, "%s: tx raw: tx disabled\n", __func__); + return; + } + + if (tx_raw_status & 0x10) { + v4l2_dbg(1, debug, sd, + "%s: tx raw: arbitration lost\n", __func__); + v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE, + (void *)CEC_TX_STATUS_ARB_LOST); + return; + } + if (tx_raw_status & 0x08) { + v4l2_dbg(1, debug, sd, "%s: tx raw: retry failed\n", __func__); + v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE, + (void *)CEC_TX_STATUS_RETRY_TIMEOUT); + return; + } + if (tx_raw_status & 0x20) { + v4l2_dbg(1, debug, sd, "%s: tx raw: ready ok\n", __func__); + v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_TX_DONE, + (void *)CEC_TX_STATUS_OK); + return; + } +} + /* Interrupt handler */ static int adv7511_isr(struct v4l2_subdev *sd, u32 status, bool *handled) { uint8_t irq_status; + uint8_t cec_irq;
/* disable interrupts to prevent a race condition */ adv7511_set_isr(sd, false); irq_status = adv7511_rd(sd, 0x96); + cec_irq = adv7511_rd(sd, 0x97); /* clear detected interrupts */ adv7511_wr(sd, 0x96, irq_status); + adv7511_wr(sd, 0x97, cec_irq);
- v4l2_dbg(1, debug, sd, "%s: irq 0x%x\n", __func__, irq_status); + v4l2_dbg(1, debug, sd, "%s: irq 0x%x, cec-irq 0x%x\n", __func__, + irq_status, cec_irq);
if (irq_status & (MASK_ADV7511_HPD_INT | MASK_ADV7511_MSEN_INT)) adv7511_check_monitor_present_status(sd); if (irq_status & MASK_ADV7511_EDID_RDY_INT) adv7511_check_edid_status(sd);
+ if (cec_irq & 0x38) + adv_cec_tx_raw_status(sd, cec_irq); + + if (cec_irq & 1) { + struct cec_msg msg; + + msg.len = cec_read(sd, 0x25) & 0x1f; + + v4l2_dbg(1, debug, sd, "%s: cec msg len %d\n", __func__, + msg.len); + + if (msg.len > 16) + msg.len = 16; + + if (msg.len) { + u8 i; + + for (i = 0; i < msg.len; i++) + msg.msg[i] = cec_read(sd, i + 0x15); + + cec_write(sd, 0x4a, 1); /* toggle to re-enable rx 1 */ + cec_write(sd, 0x4a, 0); + v4l2_subdev_notify(sd, V4L2_SUBDEV_CEC_RX_MSG, &msg); + } + } + /* enable interrupts */ adv7511_set_isr(sd, true);
@@ -697,6 +946,10 @@ static const struct v4l2_subdev_video_ops adv7511_video_ops = { .s_stream = adv7511_s_stream, .s_dv_timings = adv7511_s_dv_timings, .g_dv_timings = adv7511_g_dv_timings, + .cec_enable = adv7511_cec_enable, + .cec_log_addr = adv7511_cec_log_addr, + .cec_transmit = adv7511_cec_transmit, + .cec_transmit_timed_out = adv7511_cec_transmit_timed_out, };
/* ------------------------------ AUDIO OPS ------------------------------ */ @@ -1080,6 +1333,7 @@ static void adv7511_edid_handler(struct work_struct *work) /* We failed to read the EDID, so send an event for this. */ ed.present = false; ed.segment = adv7511_rd(sd, 0xc4); + ed.phys_addr = 0xffff; v4l2_subdev_notify(sd, ADV7511_EDID_DETECT, (void *)&ed); v4l2_dbg(1, debug, sd, "%s: no edid found\n", __func__); } @@ -1220,10 +1474,39 @@ static bool edid_verify_header(struct v4l2_subdev *sd, u32 segment) return !memcmp(data, hdmi_header, sizeof(hdmi_header)); }
+static int get_edid_spa_location(const u8 *edid) +{ + u8 d; + + if ((edid[0x7e] != 1) || + (edid[0x80] != 0x02) || + (edid[0x81] != 0x03)) { + return -1; + } + + /* search Vendor Specific Data Block (tag 3) */ + d = edid[0x82] & 0x7f; + if (d > 4) { + int i = 0x84; + int end = 0x80 + d; + + do { + u8 tag = edid[i] >> 5; + u8 len = edid[i] & 0x1f; + + if ((tag == 3) && (len >= 5)) + return i + 4; + i += len + 1; + } while (i < end); + } + return -1; +} + static bool adv7511_check_edid_status(struct v4l2_subdev *sd) { struct adv7511_state *state = get_adv7511_state(sd); uint8_t edidRdy = adv7511_rd(sd, 0xc5); + int offset;
v4l2_dbg(1, debug, sd, "%s: edid ready (retries: %d)\n", __func__, EDID_MAX_RETRIES - state->edid.read_retries); @@ -1269,6 +1552,12 @@ static bool adv7511_check_edid_status(struct v4l2_subdev *sd)
v4l2_dbg(1, debug, sd, "%s: edid complete with %d segment(s)\n", __func__, state->edid.segments); state->edid.complete = true; + offset = get_edid_spa_location(state->edid.data); + if (offset > 0) + ed.phys_addr = (state->edid.data[offset] << 8) | + state->edid.data[offset + 1]; + else + ed.phys_addr = 0xffff;
/* report when we have all segments but report only for segment 0 @@ -1290,11 +1579,14 @@ static void adv7511_init_setup(struct v4l2_subdev *sd) { struct adv7511_state *state = get_adv7511_state(sd); struct adv7511_state_edid *edid = &state->edid; + u32 cec_clk = state->pdata.cec_clk; + u8 ratio;
v4l2_dbg(1, debug, sd, "%s\n", __func__);
/* clear all interrupts */ adv7511_wr(sd, 0x96, 0xff); + adv7511_wr(sd, 0x97, 0xff); /* * Stop HPD from resetting a lot of registers. * It might leave the chip in a partly un-initialized state, @@ -1306,6 +1598,25 @@ static void adv7511_init_setup(struct v4l2_subdev *sd) adv7511_set_isr(sd, false); adv7511_s_stream(sd, false); adv7511_s_audio_stream(sd, false); + + if (state->i2c_cec == NULL) + return; + + v4l2_dbg(1, debug, sd, "%s: cec_clk %d\n", __func__, cec_clk); + + /* cec soft reset */ + cec_write(sd, 0x50, 0x01); + cec_write(sd, 0x50, 0x00); + + /* legacy mode */ + cec_write(sd, 0x4a, 0x00); + + if (cec_clk % 750000 != 0) + v4l2_err(sd, "%s: cec_clk %d, not multiple of 750 Khz\n", + __func__, cec_clk); + + ratio = (cec_clk / 750000) - 1; + cec_write(sd, 0x4e, ratio << 2); }
static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id *id) @@ -1381,19 +1692,40 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id * chip_id[0] = adv7511_rd(sd, 0xf5); chip_id[1] = adv7511_rd(sd, 0xf6); if (chip_id[0] != 0x75 || chip_id[1] != 0x11) { - v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], chip_id[1]); + v4l2_err(sd, "chip_id != 0x7511, read 0x%02x%02x\n", chip_id[0], + chip_id[1]); err = -EIO; goto err_entity; }
- state->i2c_edid = i2c_new_dummy(client->adapter, state->i2c_edid_addr >> 1); + state->i2c_edid = i2c_new_dummy(client->adapter, + state->i2c_edid_addr >> 1); if (state->i2c_edid == NULL) { v4l2_err(sd, "failed to register edid i2c client\n"); err = -ENOMEM; goto err_entity; }
- adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */ + adv7511_wr(sd, 0xe1, state->i2c_cec_addr); + if (state->pdata.cec_clk < 3000000 || + state->pdata.cec_clk > 100000000) { + v4l2_err(sd, "%s: cec_clk %u outside range, disabling cec\n", + __func__, state->pdata.cec_clk); + state->pdata.cec_clk = 0; + } + + if (state->pdata.cec_clk) { + state->i2c_cec = i2c_new_dummy(client->adapter, + (state->i2c_cec_addr>>1)); + if (state->i2c_cec == NULL) { + v4l2_err(sd, "failed to register cec i2c client\n"); + goto err_unreg_edid; + } + adv7511_wr(sd, 0xe2, 0x00); /* power up cec section */ + } else { + adv7511_wr(sd, 0xe2, 0x01); /* power down cec section */ + } + state->work_queue = create_singlethread_workqueue(sd->name); if (state->work_queue == NULL) { v4l2_err(sd, "could not create workqueue\n"); @@ -1412,6 +1744,9 @@ static int adv7511_probe(struct i2c_client *client, const struct i2c_device_id * return 0;
err_unreg_cec: + if (state->i2c_cec) + i2c_unregister_device(state->i2c_cec); +err_unreg_edid: i2c_unregister_device(state->i2c_edid); err_entity: media_entity_cleanup(&sd->entity); @@ -1435,6 +1770,8 @@ static int adv7511_remove(struct i2c_client *client) adv7511_init_setup(sd); cancel_delayed_work(&state->edid_handler); i2c_unregister_device(state->i2c_edid); + if (state->i2c_cec) + i2c_unregister_device(state->i2c_cec); destroy_workqueue(state->work_queue); v4l2_device_unregister_subdev(sd); media_entity_cleanup(&sd->entity); diff --git a/include/media/adv7511.h b/include/media/adv7511.h index bb78bed..c971b52 100644 --- a/include/media/adv7511.h +++ b/include/media/adv7511.h @@ -32,11 +32,7 @@ struct adv7511_monitor_detect { struct adv7511_edid_detect { int present; int segment; -}; - -struct adv7511_cec_arg { - void *arg; - u32 f_flags; + uint16_t phys_addr; };
struct adv7511_platform_data {