On 2019-08-05 15:41, Jerome Brunet wrote:
Provide the eld to the generic hdmi-codec driver. This will let the driver enforce the maximum channel number and set the channel allocation depending on the hdmi sink.
Cc: Jonas Karlman jonas@kwiboo.se Signed-off-by: Jerome Brunet jbrunet@baylibre.com
drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h | 1 + drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c | 10 ++++++++++ drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 1 + 3 files changed, 12 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h index 63b5756f463b..cb07dc0da5a7 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-audio.h @@ -14,6 +14,7 @@ struct dw_hdmi_audio_data {
struct dw_hdmi_i2s_audio_data { struct dw_hdmi *hdmi;
u8 *eld;
void (*write)(struct dw_hdmi *hdmi, u8 val, int offset); u8 (*read)(struct dw_hdmi *hdmi, int offset);
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c index b8ece9c1ba2c..14d499b344c0 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi-i2s-audio.c @@ -121,6 +121,15 @@ static void dw_hdmi_i2s_audio_shutdown(struct device *dev, void *data) dw_hdmi_audio_disable(hdmi); }
+static int dw_hdmi_i2s_get_eld(struct device *dev, void *data, uint8_t *buf,
size_t len)+{
- struct dw_hdmi_i2s_audio_data *audio = data;
- memcpy(buf, audio->eld, min(sizeof(audio->eld), len));
Above sizeof does not work as intended, sizeof(audio->eld) is probably the size of a pointer and not MAX_ELD_BYTES (128), resulting in only part of the ELD gets copied to buf.
Thanks for reworking dw-hdmi multi channel lpcm support!, this works on Rockchip for most parts. Without the [1] patch (reset cts+n after clock is enabled) audio sometime stay silent when switching between e.g. 2ch 44.1khz and 6ch 48khz tracks. It is not fully clear to me why reset cts+n helps, if that have negative affects on other platforms or if there is another way to solve loosing audio.
I also have a small issue with the channel allocation being selected by hdmi-codec, my soundbar reports LPCM 6.1ch instead of LPCM 7.1ch when I play a 7.1ch speaker test clip. I have a hdmi-codec patch to fix selection of channel allocation in queue.
For patch 1-7:
Reviewed-by: Jonas Karlman jonas@kwiboo.se
[1] https://github.com/Kwiboo/linux-rockchip/commit/c0839e874f843ad173ddde958303...
Regards, Jonas
- return 0;
+}
static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component, struct device_node *endpoint) { @@ -144,6 +153,7 @@ static int dw_hdmi_i2s_get_dai_id(struct snd_soc_component *component, static struct hdmi_codec_ops dw_hdmi_i2s_ops = { .hw_params = dw_hdmi_i2s_hw_params, .audio_shutdown = dw_hdmi_i2s_audio_shutdown,
- .get_eld = dw_hdmi_i2s_get_eld, .get_dai_id = dw_hdmi_i2s_get_dai_id,
};
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index bed4bb017afd..8df69c9dbfad 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -2797,6 +2797,7 @@ __dw_hdmi_probe(struct platform_device *pdev, struct dw_hdmi_i2s_audio_data audio;
audio.hdmi = hdmi;
audio.eld = hdmi->connector.eld;