Hi, Stu:
On Mon, 2018-06-11 at 11:26 +0800, Stu Hsieh wrote:
This patch add the connection from RDMA1 to DPI1
Signed-off-by: Stu Hsieh stu.hsieh@mediatek.com
drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c index fed1b5704355..4abd5dabeccf 100644 --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c @@ -85,7 +85,9 @@ #define RDMA0_MOUT_DSI2 0x4 #define RDMA0_MOUT_DSI3 0x5 #define RDMA1_MOUT_DPI0 0x2 +#define RDMA1_MOUT_DPI1 0x3
Usually, each bit of a mout register represent a output enable. Is this value 0x3 a correct value?
Regards, CK
#define DPI0_SEL_IN_RDMA1 0x1 +#define DPI1_SEL_IN_RDMA1 (0x1 << 8) #define COLOR1_SEL_IN_OVL1 0x1
#define OVL_MOUT_EN_RDMA 0x1 @@ -171,6 +173,9 @@ static unsigned int mtk_ddp_mout_en(enum mtk_ddp_comp_id cur, } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) { *addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN; value = RDMA1_MOUT_DPI0;
- } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
*addr = DISP_REG_CONFIG_DISP_RDMA1_MOUT_EN;value = RDMA1_MOUT_DPI1;@@ -190,6 +195,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur, } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI0) { *addr = DISP_REG_CONFIG_DPI_SEL_IN; value = DPI0_SEL_IN_RDMA1;
- } else if (cur == DDP_COMPONENT_RDMA1 && next == DDP_COMPONENT_DPI1) {
*addr = DISP_REG_CONFIG_DPI_SEL_IN;value = DPI1_SEL_IN_RDMA1;