On Wed, May 27, 2015 at 06:21:24PM +0900, Michel Dänzer wrote:
On 27.05.2015 18:04, Daniel Vetter wrote:
These should be functionally equivalent to the older per/post modeset functions, except that they block out drm_vblank_get right away. There's only the clock adjusting code (outside of pageflips) in readone which uses drm_vblank_get. But that code doesn't synchronize against concurrent modesets and instead handles any such races by waiting for the right vblank to arrive with a short timetout.
The longer-term plan here is to switch all kms drivers to drm_vblank_on/off so that common code like pending event cleanup can be done there, while drm_vblank_pre/post_modeset will be purely drm internal for the old UMS ioctl.
Note that the kerneldoc for pre/post_modeset is wrong since as Michel Dänzer correctly pointed out it works if only using pre/post_modeset. The trouble that lead to this comment is the very old version of drm_vblank_off to clear out pending events when disabling a pipe, which did seem to wreak havoc with the trick used by pre/post_modeset. Michel also expressed dissatisfaction with intel folks pushing new interfaces with bogus justifications. I still maintain that having a consistent set of vblank behaviour across kms drivers, separate from any old UMS functions is a useful goal.
Cc: Michel Dänzer michel.daenzer@amd.com Signed-off-by: Daniel Vetter daniel.vetter@intel.com
Can you describe at least one tangible benefit this change provides for the radeon driver?
Because I'm afraid that this might cause subtle breakage, and since we don't have any rigorous tests for this like in intel-gpu-tools (yet?), it might be painful to track it down.
So, I'd like to have a good reason for taking the risk.
right now at most a bit of code to clean out pending events on modeset disable, for somewhat consistent behaviour with other drivers. But in general it's fairly ill-defined what happens with vblank events.
Longer-term Rob&I have a pile of patches and refactorings for drm_irq.c planned so that drivers don't need to open-code all the event handling and cleanup code (for both vblank and pageflips) and maybe also some infrastructure for vblank callbacks (which also a lot of drivers hand-roll). But drm_irq.c has the trouble of being used by both kms and ums drivers, and I don't want to change any of the ums code too much. Hence first step (which has been ongoing for a while now) is trying to create a clean split between functions/features used by kms drivers and those used by the ums ioctls.
Anyway that's just my overall plan, there's not going to be a problem if you decide not to apply these patches. I just want to make sure that any such drm core refactoring projects aren't seen as intel-only, hence I send around these patches. And ofc I'd be nice to know if this does unintentionally break something, to make sure the new stuff is as widely suitable as possible. But in the end it's your call. -Daniel
drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- drivers/gpu/drm/radeon/radeon_legacy_crtc.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 42b2ea3fdcf3..77912fd48b69 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -274,13 +274,13 @@ void atombios_crtc_dpms(struct drm_crtc *crtc, int mode) if (ASIC_IS_DCE3(rdev) && !ASIC_IS_DCE6(rdev)) atombios_enable_crtc_memreq(crtc, ATOM_ENABLE); atombios_blank_crtc(crtc, ATOM_DISABLE);
drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
drm_vblank_on(dev, radeon_crtc->crtc_id);
drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id);
drm_vblank_off(dev, radeon_crtc->crtc_id);diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c index 678b4386540d..4259e27f3983 100644 --- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c +++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c @@ -330,13 +330,13 @@ static void radeon_crtc_dpms(struct drm_crtc *crtc, int mode) RADEON_CRTC_DISP_REQ_EN_B)); WREG32_P(RADEON_CRTC_EXT_CNTL, crtc_ext_cntl, ~(mask | crtc_ext_cntl)); }
drm_vblank_post_modeset(dev, radeon_crtc->crtc_id);
drm_vblank_on(dev, radeon_crtc->crtc_id);
drm_vblank_pre_modeset(dev, radeon_crtc->crtc_id);
drm_vblank_off(dev, radeon_crtc->crtc_id);-- Earthling Michel Dänzer | http://www.amd.com Libre software enthusiast | Mesa and X developer