On Mon, Jun 25, 2018 at 8:03 PM, Jernej Skrabec jernej.skrabec@siol.net wrote:
Since HDMI can be considered as main output, most capable mixer is connected to it (mixer0).
Signed-off-by: Jernej Skrabec jernej.skrabec@siol.net
.../boot/dts/sun8i-r40-bananapi-m2-ultra.dts | 45 +++++++++++++++++++ 1 file changed, 45 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts index 27d9ccd0ef2f..0ebc2f9a980e 100644 --- a/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts +++ b/arch/arm/boot/dts/sun8i-r40-bananapi-m2-ultra.dts @@ -58,6 +58,17 @@ stdout-path = "serial0:115200n8"; };
connector {compatible = "hdmi-connector";type = "a";port {hdmi_con_in: endpoint {remote-endpoint = <&hdmi_out_con>;};};};leds { compatible = "gpio-leds";@@ -93,6 +104,10 @@ }; };
+&de {
status = "okay";+};
&ehci1 { status = "okay"; }; @@ -101,6 +116,16 @@ status = "okay"; };
+&hdmi {
status = "okay";+};
+&hdmi_out {
hdmi_out_con: endpoint {remote-endpoint = <&hdmi_con_in>;};+};
&i2c0 { status = "okay";
@@ -195,6 +220,26 @@ status = "okay"; };
+&tcon_top_hdmi_in_tcon_tv0 {
remote-endpoint = <&tcon_tv0_out_tcon_top>;+};
+&tcon_top_mixer0_out_tcon_tv0 {
remote-endpoint = <&tcon_tv0_in_tcon_top>;+};
+&tcon_tv0_in {
tcon_tv0_in_tcon_top: endpoint {remote-endpoint = <&tcon_top_mixer0_out_tcon_tv0>;};+};
+&tcon_tv0_out {
tcon_tv0_out_tcon_top: endpoint {remote-endpoint = <&tcon_top_hdmi_in_tcon_tv0>;};+};
This is the wrong place for this. Once removed,
Reviewed-by: Chen-Yu Tsai wens@csie.org
&uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; -- 2.18.0
-- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.