On 12/13/2020 12:59 PM, Shankar, Uma wrote:
-----Original Message----- From: Nautiyal, Ankit K ankit.k.nautiyal@intel.com Sent: Tuesday, December 8, 2020 1:22 PM To: intel-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org; Shankar, Uma uma.shankar@intel.com; airlied@linux.ie; jani.nikula@linux.intel.com; ville.syrjala@linux.intel.com; Kulkarni, Vandita vandita.kulkarni@intel.com; Sharma, Swati2 swati2.sharma@intel.com Subject: [PATCH v4 16/16] drm/i915: Enable PCON configuration for Color Conversion for TGL
Append display here.
Noted. Will change in the next version of the patch.
This patch enables PCON configuration for color space conversion for TGL+ platfrom. This will help in supporting 8k@60 YUV420 modes common in HDMI 8k panels, through a capable PCON. Also allow 8k@60 YUV420 modes, only if PCON claims to support the color space conversion.
Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com
drivers/gpu/drm/i915/display/intel_ddi.c | 1 + drivers/gpu/drm/i915/display/intel_dp.c | 5 +++++ 2 files changed, 6 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 721a47bbc009..ed6b8ea85408 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3644,6 +3644,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, if (!is_mst) intel_dp_set_power(intel_dp, DP_SET_POWER_D0);
- intel_dp_configure_protocol_converter(intel_dp);
Both the changes seems to be unrelated, it would be good to put configuration of protocol convertor in earlier patches and just pruning logic here. Also the description of patch needs to change to clearly call this out.
Alright. Will split the pruning logic into a separate patch.
intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); /* * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index b3f1190d8150..86289c925612 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -720,6 +720,11 @@ intel_dp_mode_valid_downstream(struct intel_connector *connector, const struct drm_display_info *info = &connector->base.display_info; int tmds_clock;
- /* Allow 8k YUV420 modes, only if PCON supports RGB->YUV conversion
*/
- if (mode->hdisplay == 7680 && drm_mode_is_420_only(info, mode) &&
!intel_dp->dfp.rgb_to_ycbcr)I think this will be a platform limitation, as there may be platforms which can do that on the SOC side as well. So would be good to limit to those platforms where pcon conversion is the only option in order to support this configuration, instead of doing it for all platforms.
We do have a flag ycbcr_420_allowed which gets set for Gen > 5 and also if DP sink has ycbcr420 passthrough or ycbcr444->420 conversion support.
So theoretically we should be able to convert RGB->YCbCR for Gen > 5.
But I am not sure, if we need some changes when we use big joiner.
With Realtek HDMI2.1 dongle, I was able to get RGB->YCbCr and 444->420 conversion for 8k@60 YUV420 through PCON.
Probably need to revisit this again.
Thanks & Regards,
Ankit
return MODE_NO_420;- /*
- If PCON and HDMI2.1 sink both support FRL MODE, check FRL
- bandwidth constraints.
-- 2.17.1