[PATCH -v4 2/4] drm/i915: split intel_update_plane into check() and commit()

From: Gustavo Padovan gustavo.padovan@collabora.co.uk

Due to the upcoming atomic modesetting feature we need to separate some update functions into a check step that can fail and a commit step that should, ideally, never fail.

This commit splits intel_update_plane() and its commit part can still fail due to the fb pinning procedure.

Signed-off-by: Gustavo Padovan gustavo.padovan@collabora.co.uk --- drivers/gpu/drm/i915/intel_sprite.c | 233 ++++++++++++++++++++++-------------- 1 file changed, 141 insertions(+), 92 deletions(-)

diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index 07a74ef..a4306cf 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -845,57 +845,24 @@ static bool colorkey_enabled(struct intel_plane *intel_plane) }

static int -intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, - struct drm_framebuffer *fb, int crtc_x, int crtc_y, - unsigned int crtc_w, unsigned int crtc_h, - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) +intel_check_sprite_plane(struct drm_plane *plane, + struct intel_plane_state *state) { - struct drm_device *dev = plane->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_crtc *intel_crtc = to_intel_crtc(state->crtc); struct intel_plane *intel_plane = to_intel_plane(plane); - enum pipe pipe = intel_crtc->pipe; + struct drm_framebuffer *fb = state->fb; struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); struct drm_i915_gem_object *obj = intel_fb->obj; - struct drm_i915_gem_object *old_obj = intel_plane->obj; - int ret; - bool primary_enabled; - bool visible; + int crtc_x, crtc_y; + unsigned int crtc_w, crtc_h; + uint32_t src_x, src_y, src_w, src_h; + struct drm_rect *src = &state->src; + struct drm_rect *dst = &state->dst; + struct drm_rect *orig_src = &state->orig_src; + const struct drm_rect *clip = &state->clip; int hscale, vscale; int max_scale, min_scale; int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0); - struct drm_rect src = { - /* sample coordinates in 16.16 fixed point */ - .x1 = src_x, - .x2 = src_x + src_w, - .y1 = src_y, - .y2 = src_y + src_h, - }; - struct drm_rect dst = { - /* integer pixels */ - .x1 = crtc_x, - .x2 = crtc_x + crtc_w, - .y1 = crtc_y, - .y2 = crtc_y + crtc_h, - }; - const struct drm_rect clip = { - .x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0, - .y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0, - }; - const struct { - int crtc_x, crtc_y; - unsigned int crtc_w, crtc_h; - uint32_t src_x, src_y, src_w, src_h; - } orig = { - .crtc_x = crtc_x, - .crtc_y = crtc_y, - .crtc_w = crtc_w, - .crtc_h = crtc_h, - .src_x = src_x, - .src_y = src_y, - .src_w = src_w, - .src_h = src_h, - };

/* Don't modify another pipe's plane */ if (intel_plane->pipe != intel_crtc->pipe) { @@ -927,55 +894,55 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, max_scale = intel_plane->max_downscale << 16; min_scale = intel_plane->can_scale ? 1 : (1 << 16);

- drm_rect_rotate(&src, fb->width << 16, fb->height << 16, + drm_rect_rotate(src, fb->width << 16, fb->height << 16, intel_plane->rotation);

- hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale); + hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale); BUG_ON(hscale < 0);

- vscale = drm_rect_calc_vscale_relaxed(&src, &dst, min_scale, max_scale); + vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale); BUG_ON(vscale < 0);

- visible = drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale); + state->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);

- crtc_x = dst.x1; - crtc_y = dst.y1; - crtc_w = drm_rect_width(&dst); - crtc_h = drm_rect_height(&dst); + crtc_x = dst->x1; + crtc_y = dst->y1; + crtc_w = drm_rect_width(dst); + crtc_h = drm_rect_height(dst);

- if (visible) { + if (state->visible) { /* check again in case clipping clamped the results */ - hscale = drm_rect_calc_hscale(&src, &dst, min_scale, max_scale); + hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale); if (hscale < 0) { DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n"); - drm_rect_debug_print(&src, true); - drm_rect_debug_print(&dst, false); + drm_rect_debug_print(src, true); + drm_rect_debug_print(dst, false);

return hscale; }

- vscale = drm_rect_calc_vscale(&src, &dst, min_scale, max_scale); + vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale); if (vscale < 0) { DRM_DEBUG_KMS("Vertical scaling factor out of limits\n"); - drm_rect_debug_print(&src, true); - drm_rect_debug_print(&dst, false); + drm_rect_debug_print(src, true); + drm_rect_debug_print(dst, false);

return vscale; }

/* Make the source viewport size an exact multiple of the scaling factors. */ - drm_rect_adjust_size(&src, - drm_rect_width(&dst) * hscale - drm_rect_width(&src), - drm_rect_height(&dst) * vscale - drm_rect_height(&src)); + drm_rect_adjust_size(src, + drm_rect_width(dst) * hscale - drm_rect_width(src), + drm_rect_height(dst) * vscale - drm_rect_height(src));

- drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16, + drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, intel_plane->rotation);

/* sanity check to make sure the src viewport wasn't enlarged */ - WARN_ON(src.x1 < (int) src_x || - src.y1 < (int) src_y || - src.x2 > (int) (src_x + src_w) || - src.y2 > (int) (src_y + src_h)); + WARN_ON(src->x1 < (int) orig_src->x1 || + src->y1 < (int) orig_src->y1 || + src->x2 > (int) orig_src->x2 || + src->y2 > (int) orig_src->y2);

/* * Hardware doesn't handle subpixel coordinates. @@ -983,10 +950,10 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, * increase the source viewport size, because that could * push the downscaling factor out of bounds. */ - src_x = src.x1 >> 16; - src_w = drm_rect_width(&src) >> 16; - src_y = src.y1 >> 16; - src_h = drm_rect_height(&src) >> 16; + src_x = src->x1 >> 16; + src_w = drm_rect_width(src) >> 16; + src_y = src->y1 >> 16; + src_h = drm_rect_height(src) >> 16;

if (format_is_yuv(fb->pixel_format)) { src_x &= ~1; @@ -1000,12 +967,12 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, crtc_w &= ~1;

if (crtc_w == 0) - visible = false; + state->visible = false; } }

/* Check size restrictions when scaling */ - if (visible && (src_w != crtc_w || src_h != crtc_h)) { + if (state->visible && (src_w != crtc_w || src_h != crtc_h)) { unsigned int width_bytes;

WARN_ON(!intel_plane->can_scale); @@ -1013,12 +980,13 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, /* FIXME interlacing min height is 6 */

if (crtc_w < 3 || crtc_h < 3) - visible = false; + state->visible = false;

if (src_w < 3 || src_h < 3) - visible = false; + state->visible = false;

- width_bytes = ((src_x * pixel_size) & 63) + src_w * pixel_size; + width_bytes = ((src_x * pixel_size) & 63) + + src_w * pixel_size;

if (src_w > 2048 || src_h > 2048 || width_bytes > 4096 || fb->pitches[0] > 4096) { @@ -1027,17 +995,48 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, } }

- dst.x1 = crtc_x; - dst.x2 = crtc_x + crtc_w; - dst.y1 = crtc_y; - dst.y2 = crtc_y + crtc_h; + if (state->visible) { + src->x1 = src_x; + src->x2 = src_x + src_w; + src->y1 = src_y; + src->y2 = src_y + src_h; + } + + dst->x1 = crtc_x; + dst->x2 = crtc_x + crtc_w; + dst->y1 = crtc_y; + dst->y2 = crtc_y + crtc_h; + + return 0; +} + +static int +intel_commit_sprite_plane(struct drm_plane *plane, + struct intel_plane_state *state) +{ + struct drm_device *dev = plane->dev; + struct drm_crtc *crtc = state->crtc; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_plane *intel_plane = to_intel_plane(plane); + enum pipe pipe = intel_crtc->pipe; + struct drm_framebuffer *fb = state->fb; + struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb); + struct drm_i915_gem_object *obj = intel_fb->obj; + struct drm_i915_gem_object *old_obj = intel_plane->obj; + int crtc_x, crtc_y; + unsigned int crtc_w, crtc_h; + uint32_t src_x, src_y, src_w, src_h; + struct drm_rect *dst = &state->dst; + const struct drm_rect *clip = &state->clip; + bool primary_enabled; + int ret;

/* * If the sprite is completely covering the primary plane, * we can disable the primary and save power. */ - primary_enabled = !drm_rect_equals(&dst, &clip) || colorkey_enabled(intel_plane); - WARN_ON(!primary_enabled && !visible && intel_crtc->active); + primary_enabled = !drm_rect_equals(dst, clip) || colorkey_enabled(intel_plane); + WARN_ON(!primary_enabled && !state->visible && intel_crtc->active);

mutex_lock(&dev->struct_mutex);

@@ -1055,14 +1054,14 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, if (ret) return ret;

- intel_plane->crtc_x = orig.crtc_x; - intel_plane->crtc_y = orig.crtc_y; - intel_plane->crtc_w = orig.crtc_w; - intel_plane->crtc_h = orig.crtc_h; - intel_plane->src_x = orig.src_x; - intel_plane->src_y = orig.src_y; - intel_plane->src_w = orig.src_w; - intel_plane->src_h = orig.src_h; + intel_plane->crtc_x = state->orig_dst.x1; + intel_plane->crtc_y = state->orig_dst.y1; + intel_plane->crtc_w = drm_rect_width(&state->orig_dst); + intel_plane->crtc_h = drm_rect_height(&state->orig_dst); + intel_plane->src_x = state->orig_src.x1; + intel_plane->src_y = state->orig_src.y1; + intel_plane->src_w = drm_rect_width(&state->orig_src); + intel_plane->src_h = drm_rect_height(&state->orig_src); intel_plane->obj = obj;

if (intel_crtc->active) { @@ -1076,12 +1075,22 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, if (primary_was_enabled && !primary_enabled) intel_pre_disable_primary(crtc);

- if (visible) + if (state->visible) { + crtc_x = state->dst.x1; + crtc_y = state->dst.x2; + crtc_w = drm_rect_width(&state->dst); + crtc_h = drm_rect_height(&state->dst); + src_x = state->src.x1; + src_y = state->src.y1; + src_w = drm_rect_width(&state->src); + src_h = drm_rect_height(&state->src); intel_plane->update_plane(plane, crtc, fb, obj, crtc_x, crtc_y, crtc_w, crtc_h, src_x, src_y, src_w, src_h); - else + } else { intel_plane->disable_plane(plane, crtc); + } +

intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_SPRITE(pipe));

@@ -1109,6 +1118,46 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, }

static int +intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, + struct drm_framebuffer *fb, int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h) +{ + struct intel_plane_state state; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + int ret; + + state.crtc = crtc; + state.fb = fb; + + /* sample coordinates in 16.16 fixed point */ + state.src.x1 = src_x; + state.src.x2 = src_x + src_w; + state.src.y1 = src_y; + state.src.y2 = src_y + src_h; + + /* integer pixels */ + state.dst.x1 = crtc_x; + state.dst.x2 = crtc_x + crtc_w; + state.dst.y1 = crtc_y; + state.dst.y2 = crtc_y + crtc_h; + + state.clip.x1 = 0; + state.clip.y1 = 0; + state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0; + state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0; + state.orig_src = state.src; + state.orig_dst = state.dst; + + ret = intel_check_sprite_plane(plane, &state); + if (ret) + return ret; + + return intel_commit_sprite_plane(plane, &state); +} + +static int intel_disable_plane(struct drm_plane *plane) { struct drm_device *dev = plane->dev;