Hi Sebastian,
Thank you for the patch.
On Tue, Jun 30, 2020 at 12:33:13AM +0200, Sebastian Reichel wrote:
The standard binding for DSI requires, that the channel number
s/requires,/requires/
of the panel is encoded in DT. This adds the channel number in all OMAP3-5 boards, in preparation for using common infrastructure.
Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com
Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com
arch/arm/boot/dts/motorola-mapphone-common.dtsi | 3 ++- arch/arm/boot/dts/omap3-n950.dts | 3 ++- arch/arm/boot/dts/omap3.dtsi | 3 +++ arch/arm/boot/dts/omap4-sdp.dts | 6 ++++-- arch/arm/boot/dts/omap4.dtsi | 6 ++++++ arch/arm/boot/dts/omap5.dtsi | 6 ++++++ 6 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/motorola-mapphone-common.dtsi b/arch/arm/boot/dts/motorola-mapphone-common.dtsi index 06fbffa81636..4ffe461c3808 100644 --- a/arch/arm/boot/dts/motorola-mapphone-common.dtsi +++ b/arch/arm/boot/dts/motorola-mapphone-common.dtsi @@ -207,8 +207,9 @@ dsi1_out_ep: endpoint { }; };
- lcd0: display {
- lcd0: panel@0 { compatible = "panel-dsi-cm";
reg = <0>;diff --git a/arch/arm/boot/dts/omap3-n950.dts b/arch/arm/boot/dts/omap3-n950.dts index 31d47a1fad84..80cf4e1177da 100644 --- a/arch/arm/boot/dts/omap3-n950.dts +++ b/arch/arm/boot/dts/omap3-n950.dts @@ -225,8 +225,9 @@ dsi_out_ep: endpoint { }; };
- lcd0: display {
lcd0: panel@0 { compatible = "nokia,himalaya", "panel-dsi-cm";
reg = <0>;label = "lcd0";
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 1296d0643943..0ebbb6c11f04 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -898,6 +898,9 @@ dsi: encoder@4804fc00 { ti,hwmods = "dss_dsi1"; clocks = <&dss1_alwon_fck>, <&dss2_alwon_fck>; clock-names = "fck", "sys_clk";
#address-cells = <1>;#size-cells = <0>; }; rfbi: encoder@48050800 {diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 91480ac1f328..8a8307517dab 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -662,8 +662,9 @@ dsi1_out_ep: endpoint { }; };
- lcd0: display {
lcd0: panel@0 { compatible = "tpo,taal", "panel-dsi-cm";
reg = <0>;label = "lcd0";
reset-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */
@@ -687,8 +688,9 @@ dsi2_out_ep: endpoint { }; };
- lcd1: display {
lcd1: panel@0 { compatible = "tpo,taal", "panel-dsi-cm";
reg = <0>;label = "lcd1";
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 4400f5f8e099..c5b426616443 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -551,6 +551,9 @@ dsi1: encoder@0 { clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk";
#address-cells = <1>;#size-cells = <0>; }; };@@ -583,6 +586,9 @@ dsi2: encoder@0 { clocks = <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 8>, <&l3_dss_clkctrl OMAP4_DSS_CORE_CLKCTRL 10>; clock-names = "fck", "sys_clk";
#address-cells = <1>;#size-cells = <0>; }; };diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index fb889c5b00c9..0855c0a4050f 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -491,6 +491,9 @@ dsi1: encoder@0 { status = "disabled"; clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; clock-names = "fck";
#address-cells = <1>;#size-cells = <0>; }; };@@ -522,6 +525,9 @@ dsi2: encoder@0 { status = "disabled"; clocks = <&dss_clkctrl OMAP5_DSS_CORE_CLKCTRL 8>; clock-names = "fck";
#address-cells = <1>;#size-cells = <0>; }; };