From: Krishna Manikandan quic_mkrishn@quicinc.com
Add DSI controller and PHY nodes for sc7280.
Signed-off-by: Rajeev Nandan quic_rajeevny@quicinc.com Signed-off-by: Krishna Manikandan quic_mkrishn@quicinc.com Reviewed-by: Matthias Kaehlcke mka@chromium.org Reviewed-by: Stephen Boyd swboyd@chromium.org Signed-off-by: Sankeerth Billakanti quic_sbillaka@quicinc.com ---
Changes in v3: - Add the dsi_phy clocks (Kuogee Hsieh) - One clock cell per line (Stephen Boyd)
Changes in v2: - Drop flags from interrupts (Stephen Boyd) - Rename dsi-opp-table (Stephen Boyd) - Rename dsi phy node (Stephen Boyd)
arch/arm64/boot/dts/qcom/sc7280.dtsi | 111 ++++++++++++++++++++++++++++++++++- 1 file changed, 109 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index a4536b6..12c4d32 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -2691,8 +2691,14 @@ reg = <0 0xaf00000 0 0x20000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, - <0>, <0>, <0>, <0>, <0>, <0>; - clock-names = "bi_tcxo", "gcc_disp_gpll0_clk", + <&dsi_phy 0>, + <&dsi_phy 1>, + <0>, + <0>, + <0>, + <0>; + clock-names = "bi_tcxo", + "gcc_disp_gpll0_clk", "dsi0_phy_pll_out_byteclk", "dsi0_phy_pll_out_dsiclk", "dp_phy_pll_link_clk", @@ -2768,6 +2774,18 @@
status = "disabled";
+ ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dpu_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + }; + mdp_opp_table: opp-table { compatible = "operating-points-v2";
@@ -2792,6 +2810,95 @@ }; }; }; + + dsi0: dsi@ae94000 { + compatible = "qcom,mdss-dsi-ctrl"; + reg = <0 0x0ae94000 0 0x400>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>, + <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, + <&dispcc DISP_CC_MDSS_PCLK0_CLK>, + <&dispcc DISP_CC_MDSS_ESC0_CLK>, + <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&gcc GCC_DISP_HF_AXI_CLK>; + clock-names = "byte", + "byte_intf", + "pixel", + "core", + "iface", + "bus"; + + operating-points-v2 = <&dsi_opp_table>; + power-domains = <&rpmhpd SC7280_CX>; + + phys = <&dsi_phy>; + phy-names = "dsi"; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&dpu_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + + dsi_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-187500000 { + opp-hz = /bits/ 64 <187500000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-358000000 { + opp-hz = /bits/ 64 <358000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + dsi_phy: phy@ae94400 { + compatible = "qcom,sc7280-dsi-phy-7nm"; + reg = <0 0x0ae94400 0 0x200>, + <0 0x0ae94600 0 0x280>, + <0 0x0ae94900 0 0x280>; + reg-names = "dsi_phy", + "dsi_phy_lane", + "dsi_pll"; + + #clock-cells = <1>; + #phy-cells = <0>; + + clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "ref"; + + status = "disabled"; + }; };
pdc: interrupt-controller@b220000 {