Re: [LINUX PATCH 2/2] drm: xlnx: dsi: driver for Xilinx DSI Tx subsystem

Hi Venkateshwar,

On Thu, May 12, 2022 at 07:23:13PM +0530, Venkateshwar Rao Gannavarapu wrote:

The Xilinx MIPI DSI Tx Subsystem soft IP is used to display video data from AXI-4 stream interface.

It supports upto 4 lanes, optional register interface for the DPHY and multiple RGB color formats. This is a MIPI-DSI host driver and provides DSI bus for panels. This driver also helps to communicate with its panel using panel framework.

Thanks for submitting this driver. I have added a few comments in the following that I hope you will find useful to improve the driver.

Sam

Signed-off-by: Venkateshwar Rao Gannavarapu venkateshwar.rao.gannavarapu@xilinx.com

drivers/gpu/drm/xlnx/Kconfig | 14 ++ drivers/gpu/drm/xlnx/Makefile | 1 + drivers/gpu/drm/xlnx/xlnx_dsi.c | 456 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 471 insertions(+) create mode 100644 drivers/gpu/drm/xlnx/xlnx_dsi.c

diff --git a/drivers/gpu/drm/xlnx/Kconfig b/drivers/gpu/drm/xlnx/Kconfig index c3d0826..caa632b 100644 --- a/drivers/gpu/drm/xlnx/Kconfig +++ b/drivers/gpu/drm/xlnx/Kconfig @@ -14,3 +14,17 @@ config DRM_ZYNQMP_DPSUB This is a DRM/KMS driver for ZynqMP DisplayPort controller. Choose this option if you have a Xilinx ZynqMP SoC with DisplayPort subsystem.

It would be nice to have it in some sort of alphabetic order, both in the Kconfig file and also the Makefile.

+config DRM_XLNX_DSI

• tristate "Xilinx DRM DSI Subsystem Driver"
• depends on DRM && OF
• select DRM_KMS_HELPER
• select DRM_MIPI_DSI
• select DRM_PANEL
• select BACKLIGHT_LCD_SUPPORT

The BACKLIGHT_LCD_SUPPORT symbol is not relevant and can be dropped.

• select BACKLIGHT_CLASS_DEVICE
• select DRM_PANEL_SIMPLE

The symbol DRM_PANEL_SIMPLE is used to enable the panel_simple driver and should not be selected here.

• help

•  DRM bridge driver for Xilinx programmable DSI subsystem controller.
  

•  choose this option if you hava a Xilinx MIPI-DSI Tx subsytem in
  

•  video pipeline.
  

diff --git a/drivers/gpu/drm/xlnx/Makefile b/drivers/gpu/drm/xlnx/Makefile index 51c24b7..1e97fbe 100644 --- a/drivers/gpu/drm/xlnx/Makefile +++ b/drivers/gpu/drm/xlnx/Makefile @@ -1,2 +1,3 @@ zynqmp-dpsub-y := zynqmp_disp.o zynqmp_dpsub.o zynqmp_dp.o obj-$(CONFIG_DRM_ZYNQMP_DPSUB) += zynqmp-dpsub.o +obj-$(CONFIG_DRM_XLNX_DSI) += xlnx_dsi.o diff --git a/drivers/gpu/drm/xlnx/xlnx_dsi.c b/drivers/gpu/drm/xlnx/xlnx_dsi.c new file mode 100644 index 0000000..a5291f3 --- /dev/null +++ b/drivers/gpu/drm/xlnx/xlnx_dsi.c @@ -0,0 +1,456 @@ +// SPDX-License-Identifier: GPL-2.0 +/*

• • Xilinx FPGA MIPI DSI Tx Controller driver.
• • Copyright (C) 2022 Xilinx, Inc.
• • Author: Venkateshwar Rao G vgannava@xilinx.com

I noticed this is not the mail used in the s-o-b line.

• */

+#include <linux/clk.h> +#include <linux/module.h> +#include <linux/of_device.h>

+#include <drm/drm_atomic_helper.h> +#include <drm/drm_bridge.h> +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_of.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h>

+/* DSI Tx IP registers */ +#define XDSI_CCR 0x00 +#define XDSI_CCR_COREENB BIT(0) +#define XDSI_CCR_SOFTRST BIT(1) +#define XDSI_CCR_CRREADY BIT(2) +#define XDSI_CCR_CMDMODE BIT(3) +#define XDSI_CCR_DFIFORST BIT(4) +#define XDSI_CCR_CMDFIFORST BIT(5) +#define XDSI_PCR 0x04 +#define XDSI_PCR_LANES_MASK 3 +#define XDSI_PCR_VIDEOMODE(x) (((x) & 0x3) << 3) +#define XDSI_PCR_VIDEOMODE_MASK (0x3 << 3)

GENMASK()? Same for other XXX_MASK definitions below

+#define XDSI_PCR_VIDEOMODE_SHIFT 3 +#define XDSI_PCR_BLLPTYPE(x) ((x) << 5) +#define XDSI_PCR_BLLPMODE(x) ((x) << 6) +#define XDSI_PCR_PIXELFORMAT_MASK (0x3 << 11) +#define XDSI_PCR_PIXELFORMAT_SHIFT 11 +#define XDSI_PCR_EOTPENABLE(x) ((x) << 13) +#define XDSI_GIER 0x20 +#define XDSI_ISR 0x24 +#define XDSI_IER 0x28 +#define XDSI_STR 0x2C +#define XDSI_STR_RDY_SHPKT BIT(6) +#define XDSI_STR_RDY_LNGPKT BIT(7) +#define XDSI_STR_DFIFO_FULL BIT(8) +#define XDSI_STR_DFIFO_EMPTY BIT(9) +#define XDSI_STR_WAITFR_DATA BIT(10) +#define XDSI_STR_CMD_EXE_PGS BIT(11) +#define XDSI_STR_CCMD_PROC BIT(12) +#define XDSI_STR_LPKT_MASK (0x5 << 7) +#define XDSI_CMD 0x30 +#define XDSI_CMD_QUEUE_PACKET(x) ((x) & GENMASK(23, 0)) +#define XDSI_DFR 0x34 +#define XDSI_TIME1 0x50 +#define XDSI_TIME1_BLLP_BURST(x) ((x) & GENMASK(15, 0)) +#define XDSI_TIME1_HSA(x) (((x) & GENMASK(15, 0)) << 16) +#define XDSI_TIME2 0x54 +#define XDSI_TIME2_VACT(x) ((x) & GENMASK(15, 0)) +#define XDSI_TIME2_HACT(x) (((x) & GENMASK(15, 0)) << 16) +#define XDSI_HACT_MULTIPLIER GENMASK(1, 0) +#define XDSI_TIME3 0x58 +#define XDSI_TIME3_HFP(x) ((x) & GENMASK(15, 0)) +#define XDSI_TIME3_HBP(x) (((x) & GENMASK(15, 0)) << 16) +#define XDSI_TIME4 0x5c +#define XDSI_TIME4_VFP(x) ((x) & GENMASK(7, 0)) +#define XDSI_TIME4_VBP(x) (((x) & GENMASK(7, 0)) << 8) +#define XDSI_TIME4_VSA(x) (((x) & GENMASK(7, 0)) << 16) +#define XDSI_NUM_DATA_T 4

+/**

• • struct xlnx_dsi - Xilinx DSI-TX core
• • @bridge: DRM bridge structure
• • @dsi_host: DSI host device
• • @panel_bridge: Panel bridge structure
• • @panel: DRM panel structure
• • @dev: device structure
• • @clks: clock source structure
• • @iomem: Base address of DSI subsystem
• • @mode_flags: DSI operation mode related flags
• • @lanes: number of active data lanes supported by DSI controller
• • @mul_factor: multiplication factor for HACT timing
• • @format: pixel format for video mode of DSI controller
• • @device_found: Flag to indicate device presence
• */

+struct xlnx_dsi {

• struct drm_bridge bridge;
• struct mipi_dsi_host dsi_host;
• struct drm_bridge *panel_bridge;
• struct drm_panel *panel;

It looks wrong that both a panel and a panel_bridge is required. We should today only use the panel_bridge.

• struct device *dev;
• struct clk_bulk_data *clks;
• void __iomem *iomem;
• unsigned long mode_flags;
• u32 lanes;
• u32 mul_factor;
• enum mipi_dsi_pixel_format format;
• bool device_found;

+};

+static const struct clk_bulk_data xdsi_clks[] = {

• { .id = "s_axis_aclk" },
• { .id = "dphy_clk_200M" },

+};

+static inline struct xlnx_dsi *host_to_dsi(struct mipi_dsi_host *host) +{

• return container_of(host, struct xlnx_dsi, dsi_host);

+}

+static inline struct xlnx_dsi *bridge_to_dsi(struct drm_bridge *bridge) +{

• return container_of(bridge, struct xlnx_dsi, bridge);

+}

+static inline void xlnx_dsi_writel(void __iomem *base, int offset, u32 val) +{

• writel(val, base + offset);

+}

+static inline u32 xlnx_dsi_readl(void __iomem *base, int offset) +{

• return readl(base + offset);

+}

When I see implementations like this I wonder if a regmap would be beneficial?

+static int xlnx_dsi_panel_or_bridge(struct xlnx_dsi *dsi,

• 		    struct device_node *node)
  

+{

• struct drm_bridge *panel_bridge;
• struct drm_panel *panel;
• struct device *dev = dsi->dev;
• struct device_node *endpoint = dev->of_node;
• int ret;
• ret = drm_of_find_panel_or_bridge(endpoint, 1, 0, &panel, &panel_bridge);

From the documentation of drm_of_find_panel_or_bridge():

* This function is deprecated and should not be used in new drivers. Use * devm_drm_of_get_bridge() instead.

Please update accordingly. This will also avoid the panel/panel_bridge confusion.

• if (ret < 0) {

• dev_err(dsi->dev, "failed to find panel / bridge\n");
  

• return ret;
  

• }
• if (panel) {

• panel_bridge = devm_drm_panel_bridge_add(dev, panel);
  

• if (IS_ERR(panel_bridge))
  

• 	return PTR_ERR(panel_bridge);
  

• dsi->panel = panel;
  

• }
• dsi->panel_bridge = panel_bridge;
• if (!dsi->panel_bridge) {

• dev_err(dsi->dev, "panel not found\n");
  

• return -EPROBE_DEFER;
  

• }
• return 0;

+}

+static int xlnx_dsi_host_attach(struct mipi_dsi_host *host,

• 		struct mipi_dsi_device *device)
  

+{

• struct xlnx_dsi *dsi = host_to_dsi(host);
• u32 reg;
• reg = xlnx_dsi_readl(dsi->iomem, XDSI_PCR);
• dsi->lanes = reg & XDSI_PCR_LANES_MASK;
• dsi->format = (reg & XDSI_PCR_PIXELFORMAT_MASK) >>

• XDSI_PCR_PIXELFORMAT_SHIFT;
  

• dsi->mode_flags = device->mode_flags;
• if (dsi->lanes != device->lanes) {

• dev_err(dsi->dev, "Mismatch of lanes. panel = %d, DSI = %d\n",
  

• 	device->lanes, dsi->lanes);
  

• return -EINVAL;
  

• }
• if (dsi->lanes > 4 || dsi->lanes < 1) {

• dev_err(dsi->dev, "%d lanes : invalid xlnx,dsi-num-lanes\n",
  

• 	dsi->lanes);
  

• return -EINVAL;
  

• }
• if (dsi->format != device->format) {

• dev_err(dsi->dev, "Mismatch of format. panel = %d, DSI = %d\n",
  

• 	device->format, dsi->format);
  

• return -EINVAL;
  

• }
• return 0;

+}

+static int xlnx_dsi_host_detach(struct mipi_dsi_host *host,

• 		struct mipi_dsi_device *device)
  

+{

• struct xlnx_dsi *dsi = host_to_dsi(host);
• if (dsi->panel) {

• drm_panel_disable(dsi->panel);
  

• dsi->panel = NULL;
  

• }
• return 0;

+}

+static const struct mipi_dsi_host_ops xlnx_dsi_ops = {

• .attach = xlnx_dsi_host_attach,
• .detach = xlnx_dsi_host_detach,

+};

+static void +xlnx_dsi_bridge_disable(struct drm_bridge *bridge,

• 	struct drm_bridge_state *old_bridge_state)
  

+{

• struct xlnx_dsi *dsi = bridge_to_dsi(bridge);
• u32 reg = xlnx_dsi_readl(dsi->iomem, XDSI_CCR);
• reg &= ~XDSI_CCR_COREENB;
• xlnx_dsi_writel(dsi->iomem, XDSI_CCR, reg);
• dev_dbg(dsi->dev, "DSI-Tx is disabled\n");

+}

+static void +xlnx_dsi_bridge_mode_set(struct drm_bridge *bridge,

• 	 const struct drm_display_mode *mode,
  

• 	 const struct drm_display_mode *adjusted_mode)
  

+{

• struct xlnx_dsi *dsi = bridge_to_dsi(bridge);
• u32 reg, video_mode;
• reg = xlnx_dsi_readl(dsi->iomem, XDSI_PCR);
• video_mode = (reg & XDSI_PCR_VIDEOMODE_MASK) >> XDSI_PCR_VIDEOMODE_SHIFT;
• if (!video_mode && (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)) {

• reg = XDSI_TIME1_HSA(adjusted_mode->hsync_end -
  

• 		     adjusted_mode->hsync_start);
  

• xlnx_dsi_writel(dsi->iomem, XDSI_TIME1, reg);
  

• }
• reg = XDSI_TIME4_VFP(adjusted_mode->vsync_start -

• 	     adjusted_mode->vdisplay) |
  

• XDSI_TIME4_VBP(adjusted_mode->vtotal -
  

• 	       adjusted_mode->vsync_end) |
  

• XDSI_TIME4_VSA(adjusted_mode->vsync_end -
  

• 	       adjusted_mode->vsync_start);
  

• xlnx_dsi_writel(dsi->iomem, XDSI_TIME4, reg);
• reg = XDSI_TIME3_HFP(adjusted_mode->hsync_start -

• 	     adjusted_mode->hdisplay) |
  

• XDSI_TIME3_HBP(adjusted_mode->htotal -
  

• 	       adjusted_mode->hsync_end);
  

• xlnx_dsi_writel(dsi->iomem, XDSI_TIME3, reg);
• dev_dbg(dsi->dev, "mul factor for parsed datatype is = %d\n",

• (dsi->mul_factor) / 100);
  

• if ((adjusted_mode->hdisplay & XDSI_HACT_MULTIPLIER) != 0)

• dev_warn(dsi->dev, "Incorrect HACT will be programmed\n");
  

Maybe catch this in a mode_valid() operation?

• reg = XDSI_TIME2_HACT((adjusted_mode->hdisplay) * (dsi->mul_factor) / 100) |

• XDSI_TIME2_VACT(adjusted_mode->vdisplay);
  

• xlnx_dsi_writel(dsi->iomem, XDSI_PCR, XDSI_PCR_VIDEOMODE(BIT(0)));

+}

+static void xlnx_dsi_bridge_enable(struct drm_bridge *bridge,

• 		   struct drm_bridge_state *old_bridge_state)
  

+{

• struct xlnx_dsi *dsi = bridge_to_dsi(bridge);
• u32 reg;
• reg = xlnx_dsi_readl(dsi->iomem, XDSI_CCR);
• reg |= XDSI_CCR_COREENB;
• xlnx_dsi_writel(dsi->iomem, XDSI_CCR, reg);
• dev_dbg(dsi->dev, "MIPI DSI Tx controller is enabled.\n");

+}

+static int xlnx_dsi_bridge_attach(struct drm_bridge *bridge,

• 		  enum drm_bridge_attach_flags flags)
  

+{

• struct xlnx_dsi *dsi = bridge_to_dsi(bridge);
• if (!bridge->encoder) {

• DRM_ERROR("Parent encoder object not found\n");
  

DRM_ERROR and friends are deprecated. Use drm_xxx or dev_xxx if possible, otherwise fallback to pr_err.

• return -ENODEV;
  

• }
• /* Set the encoder type as caller does not know it */
• bridge->encoder->encoder_type = DRM_MODE_ENCODER_DSI;
• if (!dsi->device_found) {

• int ret;
  

• ret = xlnx_dsi_panel_or_bridge(dsi, dsi->dev->of_node);
  

• if (ret) {
  

• 	dev_err(dsi->dev, "dsi_panel_or_bridge failed\n");
  

• 	return ret;
  

• }
  

• dsi->device_found = true;
  

• }
• /* Attach the panel-bridge to the dsi bridge */
• return drm_bridge_attach(bridge->encoder, dsi->panel_bridge, bridge,

• 		 flags);
  

+}

+static void xlnx_dsi_bridge_detach(struct drm_bridge *bridge) +{

• struct xlnx_dsi *dsi = bridge_to_dsi(bridge);
• drm_of_panel_bridge_remove(dsi->dev->of_node, 1, 0);

+}

+static const struct drm_bridge_funcs xlnx_dsi_bridge_funcs = {

• .mode_set = xlnx_dsi_bridge_mode_set,

From the documentation of the mode_set operation:

* This is deprecated, do not use! * New drivers shall set their mode in the * &drm_bridge_funcs.atomic_enable operation.

Please adjust accordingly.

• .atomic_enable = xlnx_dsi_bridge_enable,
• .atomic_disable = xlnx_dsi_bridge_disable,
• .attach = xlnx_dsi_bridge_attach,
• .detach = xlnx_dsi_bridge_detach,

+};

For a new bridge please implement all the mandatory atomic operations.

You will need at least: .atomic_get_output_bus_fmts = xlnx_dsi_bridge_get_output_bus_fmts, .atomic_get_input_bus_fmts = xlnx_dsi_bridge_get_input_bus_fmts, .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, .atomic_reset = drm_atomic_helper_bridge_reset, };

+static int xlnx_dsi_parse_dt(struct xlnx_dsi *dsi) +{

• struct device *dev = dsi->dev;
• struct device_node *node = dev->of_node;
• int ret;
• u32 datatype;
• static const int xdsi_mul_fact[XDSI_NUM_DATA_T] = {300, 225, 225, 200};
• /*

• * Used as a multiplication factor for HACT based on used
  

• * DSI data type.
  

• *
  

• * e.g. for RGB666_L datatype and 1920x1080 resolution,
  

• * the Hact (WC) would be as follows -
  

• * 1920 pixels * 18 bits per pixel / 8 bits per byte
  

• * = 1920 pixels * 2.25 bytes per pixel = 4320 bytes.
  

• *
  

• * Data Type - Multiplication factor
  

• * RGB888    - 3
  

• * RGB666_L  - 2.25
  

+- * RGB666_P - 2.25

• * RGB565    - 2
  

• *
  

• * Since the multiplication factor is a floating number,
  

• * a 100x multiplication factor is used.
  

• */
  

• ret = of_property_read_u32(node, "xlnx,dsi-data-type", &datatype);
• if (ret < 0) {

• dev_err(dsi->dev, "missing xlnx,dsi-data-type property\n");
  

• return ret;
  

• }
• dsi->format = datatype;
• if (datatype > MIPI_DSI_FMT_RGB565) {

• dev_err(dsi->dev, "Invalid xlnx,dsi-data-type string\n");
  

• return -EINVAL;
  

• }
• dsi->mul_factor = xdsi_mul_fact[datatype];
• dev_dbg(dsi->dev, "DSI controller num lanes = %d", dsi->lanes);
• dev_dbg(dsi->dev, "DSI controller datatype = %d\n", datatype);
• return 0;

+}

+static int xlnx_dsi_probe(struct platform_device *pdev) +{

• struct device *dev = &pdev->dev;
• struct resource *res;
• struct xlnx_dsi *dsi;
• int num_clks = ARRAY_SIZE(xdsi_clks);
• int ret;
• dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
• if (!dsi)

• return -ENOMEM;
  

• dsi->dev = dev;
• dsi->clks = devm_kmemdup(dev, xdsi_clks, sizeof(xdsi_clks),

• 		 GFP_KERNEL);
  

• if (!dsi->clks)

• return -ENOMEM;
  

• res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
• dsi->iomem = devm_ioremap_resource(dev, res);
• if (IS_ERR(dsi->iomem))

• return PTR_ERR(dsi->iomem);
  

• ret = clk_bulk_get(dev, num_clks, dsi->clks);
• if (ret)

• return ret;
  

• ret = xlnx_dsi_parse_dt(dsi);
• if (ret)

• return ret;
  

• ret = clk_bulk_prepare_enable(num_clks, dsi->clks);
• if (ret)

• goto err_clk_put;
  

• platform_set_drvdata(pdev, dsi);
• dsi->dsi_host.ops = &xlnx_dsi_ops;
• dsi->dsi_host.dev = dev;
• ret = mipi_dsi_host_register(&dsi->dsi_host);
• if (ret) {

• dev_err(dev, "Failed to register MIPI host: %d\n", ret);
  

• goto err_clk_put;
  

• }
• dsi->bridge.driver_private = dsi;
• dsi->bridge.funcs = &xlnx_dsi_bridge_funcs;

+#ifdef CONFIG_OF

The driver depends on CONFIG_OF - so no need to check it here.

• dsi->bridge.of_node = pdev->dev.of_node;

+#endif

• drm_bridge_add(&dsi->bridge);

+err_clk_put:

• clk_bulk_put(num_clks, dsi->clks);
• return ret;

+}

+static int xlnx_dsi_remove(struct platform_device *pdev) +{

• struct xlnx_dsi *dsi = platform_get_drvdata(pdev);
• int num_clks = ARRAY_SIZE(xdsi_clks);
• mipi_dsi_host_unregister(&dsi->dsi_host);
• clk_bulk_disable_unprepare(num_clks, dsi->clks);
• clk_bulk_put(num_clks, dsi->clks);
• return 0;

+}

+static const struct of_device_id xlnx_dsi_of_match[] = {

• { .compatible = "xlnx,dsi-tx-v2.0"},
• { }

+}; +MODULE_DEVICE_TABLE(of, xlnx_dsi_of_match);

+static struct platform_driver dsi_driver = {

• .probe = xlnx_dsi_probe,
• .remove = xlnx_dsi_remove,
• .driver = {

• .name = "xlnx-dsi",
  

• .of_match_table = xlnx_dsi_of_match,
  

• },

+};

+module_platform_driver(dsi_driver);

+MODULE_AUTHOR("Venkateshwar Rao G vgannava@xilinx.com"); +MODULE_DESCRIPTION("Xilinx MIPI DSI host controller driver");

+MODULE_LICENSE("GPL");

1.8.3.1