Quoting Marijn Suijten (2021-08-30 11:24:44)
All DSI PHY/PLL drivers were referencing their VCO parent clock by a global name, most of which don't exist or have been renamed. These clock drivers seem to function fine without that except the 14nm driver for the sdm6xx [1].
At the same time all DTs provide a "ref" clock as per the requirements of dsi-phy-common.yaml, but the clock is never used. This patchset puts that clock to use without relying on a global clock name, so that all dependencies are explicitly defined in DT (the firmware) in the end.
Note that msm8974 is the only board not providing this clock, and apq8064 was providing the wrong clock (19.2MHz cxo instead of 27MHz pxo). Both have been been addressed in separate patches that are supposed to land well in advance of this patchset.
Furthermore not all board-DTs provided this clock initially but that deficiency has been addressed in followup patches (see the Fixes: below). Those commits seem to assume that the clock was used, while nothing in history indicates that this "ref" clock was ever retrieved.
Fixes: 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY") Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY") Fixes: 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs") Signed-off-by: Marijn Suijten marijn.suijten@somainline.org
drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +++- drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 4 +++- 5 files changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c index e46b10fc793a..3cbb1f1475e8 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c @@ -562,7 +562,9 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm, struct clk_hw **prov char clk_name[32], parent[32], vco_name[32]; char parent2[32], parent3[32], parent4[32]; struct clk_init_data vco_init = {
.parent_names = (const char *[]){ "xo" },
.parent_data = &(const struct clk_parent_data) {.fw_name = "ref",
Please also add .name as the old parent_names value so that newer kernels can be used without having to use new DT.
}, .num_parents = 1, .name = vco_name, .flags = CLK_IGNORE_UNUSED,