The "channel" usage in omap dsi driver is confusing. As the first step, change "channel" to "dispc_channel" when dealing with the dispc channel.
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com --- drivers/gpu/drm/omapdrm/dss/dsi.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c index 32e6170abd95..789c26baad86 100644 --- a/drivers/gpu/drm/omapdrm/dss/dsi.c +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c @@ -3975,10 +3975,10 @@ static int dsi_configure_dispc_clocks(struct dsi_data *dsi)
static int dsi_display_init_dispc(struct dsi_data *dsi) { - enum omap_channel channel = dsi->output.dispc_channel; + enum omap_channel dispc_channel = dsi->output.dispc_channel; int r;
- dss_select_lcd_clk_source(dsi->dss, channel, dsi->module_id == 0 ? + dss_select_lcd_clk_source(dsi->dss, dispc_channel, dsi->module_id == 0 ? DSS_CLK_SRC_PLL1_1 : DSS_CLK_SRC_PLL2_1);
@@ -4014,19 +4014,19 @@ static int dsi_display_init_dispc(struct dsi_data *dsi) dss_mgr_unregister_framedone_handler(&dsi->output, dsi_framedone_irq_callback, dsi); err: - dss_select_lcd_clk_source(dsi->dss, channel, DSS_CLK_SRC_FCK); + dss_select_lcd_clk_source(dsi->dss, dispc_channel, DSS_CLK_SRC_FCK); return r; }
static void dsi_display_uninit_dispc(struct dsi_data *dsi) { - enum omap_channel channel = dsi->output.dispc_channel; + enum omap_channel dispc_channel = dsi->output.dispc_channel;
if (dsi->mode == OMAP_DSS_DSI_CMD_MODE) dss_mgr_unregister_framedone_handler(&dsi->output, dsi_framedone_irq_callback, dsi);
- dss_select_lcd_clk_source(dsi->dss, channel, DSS_CLK_SRC_FCK); + dss_select_lcd_clk_source(dsi->dss, dispc_channel, DSS_CLK_SRC_FCK); }
static int dsi_configure_dsi_clocks(struct dsi_data *dsi) @@ -4843,12 +4843,12 @@ static int dsi_set_config(struct omap_dss_device *dssdev, }
/* - * Return a hardcoded channel for the DSI output. This should work for + * Return a hardcoded dispc channel for the DSI output. This should work for * current use cases, but this can be later expanded to either resolve * the channel in some more dynamic manner, or get the channel as a user * parameter. */ -static enum omap_channel dsi_get_channel(struct dsi_data *dsi) +static enum omap_channel dsi_get_dispc_channel(struct dsi_data *dsi) { switch (dsi->data->model) { case DSI_MODEL_OMAP3: @@ -5400,7 +5400,7 @@ static int dsi_init_output(struct dsi_data *dsi)
out->type = OMAP_DISPLAY_TYPE_DSI; out->name = dsi->module_id == 0 ? "dsi.0" : "dsi.1"; - out->dispc_channel = dsi_get_channel(dsi); + out->dispc_channel = dsi_get_dispc_channel(dsi); out->dsi_ops = &dsi_ops; out->of_port = 0; out->bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE