This moves the nspire over to using the device tree to set-up and probe the PL111 DRM driver and use the panels from the simple-panel drivers.
Cc: Daniel Tang dt.tangr@gmail.com Cc: Fabian Vogt fabian@ritter-vogt.de Signed-off-by: Linus Walleij linus.walleij@linaro.org --- arch/arm/boot/dts/nspire-classic.dtsi | 19 ++++- arch/arm/boot/dts/nspire-cx.dts | 18 +++- arch/arm/boot/dts/nspire.dtsi | 10 ++- arch/arm/mach-nspire/Makefile | 1 - arch/arm/mach-nspire/clcd.c | 114 -------------------------- arch/arm/mach-nspire/clcd.h | 10 --- arch/arm/mach-nspire/nspire.c | 25 ------ 7 files changed, 43 insertions(+), 154 deletions(-) delete mode 100644 arch/arm/mach-nspire/clcd.c delete mode 100644 arch/arm/mach-nspire/clcd.h
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi index c53f42777851..fabd8270f168 100644 --- a/arch/arm/boot/dts/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire-classic.dtsi @@ -8,7 +8,13 @@ /include/ "nspire.dtsi"
&lcd { - lcd-type = "classic"; + port { + clcd_pads: endpoint { + remote-endpoint = <&panel_in>; + /* Dummy values, since we are grayscale */ + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; };
&fast_timer { @@ -69,6 +75,17 @@ #interrupt-cells = <1>; }; }; + + panel { + compatible = "ti,nspire-classic-lcd-panel"; + ports { + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; + }; chosen { bootargs = "debug earlyprintk console=tty0 console=ttyS0,115200n8 root=/dev/ram0"; }; diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts index da95c3736651..1551d0d0189f 100644 --- a/arch/arm/boot/dts/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire-cx.dts @@ -9,7 +9,12 @@ /include/ "nspire.dtsi"
&lcd { - lcd-type = "cx"; + port { + clcd_pads: endpoint { + remote-endpoint = <&panel_in>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; };
&fast_timer { @@ -106,6 +111,17 @@ }; }; }; + + panel { + compatible = "ti,nspire-cx-lcd-panel"; + ports { + port { + panel_in: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + }; + }; chosen { bootargs = "debug earlyprintk console=tty0 console=ttyAMA0,115200n8 root=/dev/ram0"; }; diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index c35fd6667716..d9a0fd7524dc 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -95,8 +95,14 @@ reg = <0xC0000000 0x1000>; interrupts = <21>;
- clocks = <&apb_pclk>; - clock-names = "apb_pclk"; + /* + * We assume the same clock is fed to APB and CLCDCLK. + * There is some code to scale the clock down by a factor + * 48 for the display so likely the frequency to the + * display is 1MHz and the CLCDCLK is 48 MHz. + */ + clocks = <&apb_pclk>, <&apb_pclk>; + clock-names = "clcdclk", "apb_pclk"; };
adc: adc@C4000000 { diff --git a/arch/arm/mach-nspire/Makefile b/arch/arm/mach-nspire/Makefile index 1d568c600452..4716b9b9aa7b 100644 --- a/arch/arm/mach-nspire/Makefile +++ b/arch/arm/mach-nspire/Makefile @@ -1,3 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only obj-y += nspire.o -obj-y += clcd.o diff --git a/arch/arm/mach-nspire/clcd.c b/arch/arm/mach-nspire/clcd.c deleted file mode 100644 index 44738dcb391d..000000000000 --- a/arch/arm/mach-nspire/clcd.c +++ /dev/null @@ -1,114 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-nspire/clcd.c - * - * Copyright (C) 2013 Daniel Tang tangrs@tangrs.id.au - */ - -#include <linux/init.h> -#include <linux/of.h> -#include <linux/amba/bus.h> -#include <linux/amba/clcd.h> -#include <linux/dma-mapping.h> - -static struct clcd_panel nspire_cx_lcd_panel = { - .mode = { - .name = "Color LCD", - .refresh = 60, - .xres = 320, - .yres = 240, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED, - .pixclock = 1, - .hsync_len = 6, - .vsync_len = 1, - .right_margin = 50, - .left_margin = 38, - .lower_margin = 3, - .upper_margin = 17, - }, - .width = 65, /* ~6.50 cm */ - .height = 49, /* ~4.87 cm */ - .tim2 = TIM2_IPC, - .cntl = CNTL_LCDTFT | CNTL_LCDVCOMP(1), - .bpp = 16, - .caps = CLCD_CAP_565, -}; - -static struct clcd_panel nspire_classic_lcd_panel = { - .mode = { - .name = "Grayscale LCD", - .refresh = 60, - .xres = 320, - .yres = 240, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .vmode = FB_VMODE_NONINTERLACED, - .pixclock = 1, - .hsync_len = 6, - .vsync_len = 1, - .right_margin = 6, - .left_margin = 6, - }, - .width = 71, /* 7.11cm */ - .height = 53, /* 5.33cm */ - .tim2 = 0x80007d0, - .cntl = CNTL_LCDMONO8, - .bpp = 8, - .grayscale = 1, - .caps = CLCD_CAP_5551, -}; - -int nspire_clcd_setup(struct clcd_fb *fb) -{ - struct clcd_panel *panel; - size_t panel_size; - const char *type; - dma_addr_t dma; - int err; - - BUG_ON(!fb->dev->dev.of_node); - - err = of_property_read_string(fb->dev->dev.of_node, "lcd-type", &type); - if (err) { - pr_err("CLCD: Could not find lcd-type property\n"); - return err; - } - - if (!strcmp(type, "cx")) { - panel = &nspire_cx_lcd_panel; - } else if (!strcmp(type, "classic")) { - panel = &nspire_classic_lcd_panel; - } else { - pr_err("CLCD: Unknown lcd-type %s\n", type); - return -EINVAL; - } - - panel_size = ((panel->mode.xres * panel->mode.yres) * panel->bpp) / 8; - panel_size = ALIGN(panel_size, PAGE_SIZE); - - fb->fb.screen_base = dma_alloc_wc(&fb->dev->dev, panel_size, &dma, - GFP_KERNEL); - - if (!fb->fb.screen_base) { - pr_err("CLCD: unable to map framebuffer\n"); - return -ENOMEM; - } - - fb->fb.fix.smem_start = dma; - fb->fb.fix.smem_len = panel_size; - fb->panel = panel; - - return 0; -} - -int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma) -{ - return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base, - fb->fb.fix.smem_start, fb->fb.fix.smem_len); -} - -void nspire_clcd_remove(struct clcd_fb *fb) -{ - dma_free_wc(&fb->dev->dev, fb->fb.fix.smem_len, fb->fb.screen_base, - fb->fb.fix.smem_start); -} diff --git a/arch/arm/mach-nspire/clcd.h b/arch/arm/mach-nspire/clcd.h deleted file mode 100644 index 7f36bd8511c5..000000000000 --- a/arch/arm/mach-nspire/clcd.h +++ /dev/null @@ -1,10 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * linux/arch/arm/mach-nspire/clcd.h - * - * Copyright (C) 2013 Daniel Tang tangrs@tangrs.id.au - */ - -int nspire_clcd_setup(struct clcd_fb *fb); -int nspire_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma); -void nspire_clcd_remove(struct clcd_fb *fb); diff --git a/arch/arm/mach-nspire/nspire.c b/arch/arm/mach-nspire/nspire.c index 957bd0c0fbd5..2d4abb0288b9 100644 --- a/arch/arm/mach-nspire/nspire.c +++ b/arch/arm/mach-nspire/nspire.c @@ -12,14 +12,12 @@ #include <linux/irqchip/arm-vic.h> #include <linux/clkdev.h> #include <linux/amba/bus.h> -#include <linux/amba/clcd.h>
#include <asm/mach/arch.h> #include <asm/mach-types.h> #include <asm/mach/map.h>
#include "mmio.h" -#include "clcd.h"
static const char *const nspire_dt_match[] __initconst = { "ti,nspire", @@ -29,28 +27,6 @@ static const char *const nspire_dt_match[] __initconst = { NULL, };
-static struct clcd_board nspire_clcd_data = { - .name = "LCD", - .caps = CLCD_CAP_5551 | CLCD_CAP_565, - .check = clcdfb_check, - .decode = clcdfb_decode, - .setup = nspire_clcd_setup, - .mmap = nspire_clcd_mmap, - .remove = nspire_clcd_remove, -}; - - -static struct of_dev_auxdata nspire_auxdata[] __initdata = { - OF_DEV_AUXDATA("arm,pl111", NSPIRE_LCD_PHYS_BASE, - NULL, &nspire_clcd_data), - { } -}; - -static void __init nspire_init(void) -{ - of_platform_default_populate(NULL, nspire_auxdata, NULL); -} - static void nspire_restart(enum reboot_mode mode, const char *cmd) { void __iomem *base = ioremap(NSPIRE_MISC_PHYS_BASE, SZ_4K); @@ -62,6 +38,5 @@ static void nspire_restart(enum reboot_mode mode, const char *cmd)
DT_MACHINE_START(NSPIRE, "TI-NSPIRE") .dt_compat = nspire_dt_match, - .init_machine = nspire_init, .restart = nspire_restart, MACHINE_END