On Lu, 2018-05-07 at 11:50 -0500, Rob Herring wrote:
On Thu, May 03, 2018 at 05:26:02PM +0300, Robert Chiras wrote:
Signed-off-by: Robert Chiras robert.chiras@nxp.com
.../bindings/display/panel/raydium,rm67191.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/raydium,rm67191.txt
diff --git a/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t xt b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t xt new file mode 100644 index 0000000..0fe6d4b --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raydium,rm67191.t xt @@ -0,0 +1,38 @@ +Raydium RM67171 OLED LCD panel with MIPI-DSI protocol
+Required properties: +- compatible: "raydium,rm67191" +- reg: virtual channel for MIPI-DSI protocol
must be <0>+- dsi-lanes: number of DSI lanes to be used
must be <3> or <4>+- port: input port node with endpoint definition as
defined inDocumentation/devicetree/bindings/graph.txt;
the input port should be connected to aMIPI-DSI device
driver+Optional properties: +- reset-gpio: a GPIO spec for the RST_B GPIO pin +- pinctrl-0 phandle to the pin settings for the reset pin +- panel-width-mm: physical panel width [mm] +- panel-height-mm: physical panel height [mm]
width-mm and height-mm are the common property names.
OK, I will change them accordingly.
+[1]: Documentation/devicetree/bindings/display/display-timing.txt
Footnote to what?
In the previous version it had an optional display-timing property. I removed it in this version, but I forgot to remove the footnote. I will remove this in the next version of the patch-set.