This series convert Allwinner DSI controller to full functional drm bridge driver for supporting slave panel, bridges.
Here, are the previous version changes[1].
The key concern about these changes is about kms hotplug which indeed not compatible with bridge conversion. However, I did try several ways to support hotplug with the bridge but it's resulting in a deadlock where bind never attach bridge until bridge pointer found and bridge pointer cannot found until bind finishes. Any inputs on this would be appreciated.
[1] https://lwn.net/Articles/783127/
Any inputs? Jagan.
Jagan Teki (7): drm: sun4i: dsi: Use drm_of_find_panel_or_bridge drm: sun4i: dsi: Add bridge support drm: sun4i: dsi: Convert to bridge driver drm: sun4i: dsi: Separate code for bridge pre_enable drm: bridge: Queue the bridge chain instead of stacking drm: sun4i: dsi: Use drm_panel_bridge, connector API [DO NOT MERGE] ARM: dts: sun8i: bananapi-m2m: Enable S070WV20-CT16 panel
arch/arm/boot/dts/sun8i-r16-bananapi-m2m.dts | 85 ++++++++++++ drivers/gpu/drm/drm_bridge.c | 4 +- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 128 +++++++++---------- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 11 +- 4 files changed, 150 insertions(+), 78 deletions(-)