Ajay Kumar wrote:
Define videoports and use endpoints to describe the connection between the encoder, bridge and the panel, instead of using phandles.
Signed-off-by: Ajay Kumar ajaykumar.rs@samsung.com Acked-by: Inki Dae inki.dae@samsung.com Tested-by: Rahul Sharma rahul.sharma@samsung.com Tested-by: Javier Martinez Canillas javier.martinez@collabora.co.uk Tested-by: Gustavo Padovan gustavo.padovan@collabora.co.uk Tested-by: Sjoerd Simons sjoerd.simons@collabora.co.uk
arch/arm/boot/dts/exynos5250-snow.dts | 30 ++++++++++++++++++++++++++++-- 1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index b9aeec4..1bd5d3a 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -183,7 +183,20 @@ powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; edid-emulation = <5>;
panel = <&panel>;
ports {port@0 {bridge_out: endpoint {remote-endpoint = <&panel_in>;};};port@1 {bridge_in: endpoint {remote-endpoint = <&dp_out>;};};};@@ -228,6 +241,12 @@ compatible = "auo,b116xw03"; power-supply = <&fet6>; backlight = <&backlight>;
port {panel_in: endpoint {remote-endpoint = <&bridge_out>;};};};
@@ -242,7 +261,14 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <2>; samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
- bridge = <&ptn3460>;
- ports {
port@0 {dp_out: endpoint {remote-endpoint = <&bridge_in>;};};- };
};
&ehci {
1.7.9.5
I'm fine on the DT changes in this series, shall I take 13/14 and 14/14 in Samsung tree?
- Kukjin