From: zain wang wzz@rock-chips.com
There is no register named ANALOGIX_DP_PLL_CTL in Rockchip edp phy reg list. We should use BIT_4 in ANALOGIX_DP_PD to control the pll power instead of ANALOGIX_DP_PLL_CTL.
Cc: Douglas Anderson dianders@chromium.org Signed-off-by: zain wang wzz@rock-chips.com Signed-off-by: Sean Paul seanpaul@chromium.org Signed-off-by: Thierry Escande thierry.escande@collabora.com Reviewed-by: Andrzej Hajda a.hajda@samsung.com --- drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c index 7b7fd227e1f9..02ab1aaa9993 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c @@ -230,16 +230,20 @@ enum pll_status analogix_dp_get_pll_lock_status(struct analogix_dp_device *dp) void analogix_dp_set_pll_power_down(struct analogix_dp_device *dp, bool enable) { u32 reg; + u32 mask = DP_PLL_PD; + u32 pd_addr = ANALOGIX_DP_PLL_CTL;
- if (enable) { - reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL); - reg |= DP_PLL_PD; - writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL); - } else { - reg = readl(dp->reg_base + ANALOGIX_DP_PLL_CTL); - reg &= ~DP_PLL_PD; - writel(reg, dp->reg_base + ANALOGIX_DP_PLL_CTL); + if (dp->plat_data && is_rockchip(dp->plat_data->dev_type)) { + pd_addr = ANALOGIX_DP_PD; + mask = RK_PLL_PD; } + + reg = readl(dp->reg_base + pd_addr); + if (enable) + reg |= mask; + else + reg &= ~mask; + writel(reg, dp->reg_base + pd_addr); }
void analogix_dp_set_analog_power_down(struct analogix_dp_device *dp,